A novel Nickel-Aluminum alloy with Titanium for improved anode performance and properties in Molten Carbonate Fuel Cells
Source abstract
Abstract
Abstract The anode materials of MCFC require more investigations in order to boost performances at long term. In literature, many NiAl modified alloys have been proposed but not always enhanced cell performance and improved mechanical properties are achieved together. In this work, differently from previous literature, the use of Ti in a NiAl/Ti system is proposed as an effective strategy to enhance both mechanical and electrochemical properties. Results show that bending strength and stiffness increase whereas creep deformation under high pressure-temperature is lower, i.e. around 5–6%, compared to 7.5% of the standard benchmark. The preliminary cell tests carried out show also how the performance, in terms of current and voltage output, is better for anodes with Ti addition with a maximum power density of 165 mW cm −2 at 300 mA cm −2 for Ti 5% compared to 149 mW cm −2 of Ni5Al at the same current density. Finally, the best electrochemical behavior is found for the Ti 5% sample as it achieved the lowest internal and charge transfer resistance at the end of tests. These results suggest that NiAl/Ti systems can be eligible anode materials and are worthy to be investigated more in order to attract a renewed interest for development of MCFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. A review of potential innovations for production, conditioning and utilization of biogas with multiple-criteria assessment10.1016/j.rser.2015.10.054 ↗
2. Molten carbonate fuel cell system fed with biofuels for electricity production10.1016/j.ijhydene.2016.05.119 ↗
3. Economic feasibility study of a fuel cell-based combined cooling, heating and power system for a data centre10.1016/j.enbuild.2015.11.012 ↗
4. Modeling the performance of MCFC for various fuel and oxidant compositions10.1016/j.ijhydene.2014.05.151 ↗
5. Approaches to overcome the barrier issues of passive direct methanol fuel cell – Review10.1016/j.rser.2016.09.002 ↗
6. Extension of an effective MCFC kinetic model to a wider range of operating conditions10.1016/j.ijhydene.2015.10.152 ↗
7. A study on the electrochemical performance of 100-cm2 class direct carbon-molten carbonate fuel cell (DC-MCFC)10.1016/j.ijhydene.2014.12.112 ↗
8. Performance assessment of natural gas and biogas fueled molten carbonate fuel cells in carbon capture configuration10.1016/j.jpowsour.2016.04.071 ↗
9. Exergy analysis and optimisation of a marine molten carbonate fuel cell system in simple and combined cycle configuration10.1016/j.enconman.2015.09.007 ↗
10. A thermo-economic analysis of repowering of a 250MW coal fired power plant through integration of Molten Carbonate Fuel Cell with carbon capture10.1016/j.ijggc.2016.04.021 ↗
11. Study on a new IGCC (integrated Gasification combined cycle) system with CO2 capture by integrating MCFC (molten carbonate fuel cell)10.1016/j.energy.2015.05.011 ↗
12. Study on coal-fired power plant with CO2 capture by integrating molten carbonate fuel cell system10.1016/j.energy.2016.03.063 ↗
13. Study on a novel pressurized MCFC hybrid system with CO2 capture10.1016/j.energy.2016.05.074 ↗
14. Energy management strategies in hybrid renewable energy systems: a review10.1016/j.rser.2016.05.040 ↗
15. Performance evaluation and parametric optimum design of a molten carbonate fuel cell-thermophotovoltaic cell hybrid system10.1016/j.enconman.2016.09.051 ↗
16. Thermodynamic assessment of an integrated molten carbonate fuel cell and absorption refrigerator hybrid system for combined power and cooling applications10.1016/j.ijrefrig.2016.07.011 ↗
17. Materials issues and recent developments in molten carbonate fuel cells10.1007/s10008-012-1771-y ↗
18. Effect of electrolyte amount on the performance in a molten carbonate fuel cell
19. SOFC and MCFC: Commonalities and opportunities for integrated research10.1016/j.ijhydene.2010.09.071 ↗
20. Evaluation of Ni–Ni3Al(5wt.%)–Al(3wt.%) as an anode electrode for molten carbonate fuel cell: Part I: creep and sintering resistance10.1016/j.jallcom.2004.06.103 ↗
21. Research on high-temperature compression and creep behavior of porous Cu–Ni–Cr alloy for molten carbonate fuel cell anodes
22. Influence of nano zirconia on NiAl anodes for molten carbonate fuel cell: characterization, cell tests and post-analysis10.1016/j.jpowsour.2016.11.029 ↗
23. Fabrication of Ni-Al-Cr alloy anode for molten carbonate fuel cells10.1016/j.matchemphys.2012.08.018 ↗
24. Enhancing Ni anode performance via Gd2O3 addition in molten carbonate-type direct carbon fuel cell10.1016/j.ijhydene.2014.03.180 ↗
25. Fabrication and characteristics of anode as an electrolyte reservoir for molten carbonate fuel cell10.1016/j.jpowsour.2005.07.068 ↗
26. Environmental effects synthesis and characterization of molten carbonate fuel cell anode materials synthesis and characterization of molten carbonate fuel cell anode materials
27. Nano Ni layered anode for enhanced MCFC performance at reduced operating temperature10.1016/j.ijhydene.2014.03.253 ↗
28. Effect of the flow directions on a 100 cm2 MCFC single cell with internal flow channels10.1016/j.ijhydene.2016.03.188 ↗
29. Electrochemical in situ STM study of Al and Ti–Al alloy electrodeposition on Au(111) from a room temperature molten salt electrolyte10.1039/B407846M ↗
30. Comparison of the corrosion behavior of pure titanium and its alloys in fluoride-containing sulfuric acid10.1016/j.corsci.2015.11.003 ↗
31. Electrochemical and XPS study of the Nickel - titanium electrode surface10.1021/ac960236e ↗
32. Study of NiO cathode modified by rare earth oxide additive for MCFC by electrochemical impedance spectroscopy10.1016/j.electacta.2004.04.019 ↗
33. Analysis of impedance in a molten carbonate fuel cell10.1016/j.jelechem.2016.07.005 ↗
34. A dual analyzer for real-time impedance and noise spectroscopy of nanoscale devices10.1063/1.3553208 ↗
35. Electrochemical impedance study of the poisoning behaviour of Ni-based anodes at low concentrations of H2S in an MCFC10.1016/j.ijhydene.2012.03.110 ↗