journal article·2017-03

New hydrogen titanium phosphate sulfate electrodes for Li-ion and Na-ion batteries

Ran Zhao, Daniel Mieritz, Dong-Kyun Seo, Candace K. Chan

Publisher page

Abstract

Abstract NASICON-type materials with general formula A x M 2 (PO 4 ) 3 (A = Li or Na, M = Ti, V, and Fe) are promising candidates for Li- and Na-ion batteries due to their open three-dimensional framework structure. Here we report the electrochemical properties of hydrogen titanium phosphate sulfate, H 0.4 Ti 2 (PO 4 ) 2.4 (SO 4 ) 0.6 (HTPS), a new mixed polyanion material with NASICON structure. Micron-sized HTPS aggregates with crystallite grain size of ca. 23 nm are synthesized using a sol-gel synthesis in an acidic medium. The properties of the as-synthesized HTPS, ball-milled HTPS, and samples prepared as carbon composites using an in-situ glucose decomposition reaction are investigated. A capacity of 148 mAh g −1 corresponding to insertion of 2 Li + per formula unit is observed in the ball-milled HTPS over the potential window of 1.5–3.4 V vs. Li/Li + . Lithiation at ca. 2.8 and 2.5 V is determined to occur through filling of the M1 and M2 sites, respectively. Powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) are used characterize the HTPS before and after cycling. Evaluation of the HTPS in a Na-ion cell is also performed. A discharge capacity of 93 mAh g −1 with sodiation at ca. 2.9 and 2.2 V vs. Na/Na + is observed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Chemical Synthesis and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Crystal structures and crystal chemistry in the system Na1+xZr2SixP3−xO1210.1016/0025-5408(76)90073-8 ↗
2. Fast Na+ ion transport in skeleton structures10.1016/0025-5408(76)90077-5 ↗
3. Pulsed laser deposition of superionic ceramic thin films: deposition and applications in electrochemistry10.1016/S0169-4332(97)00674-0 ↗
4. Solid electrolyte CO2 sensor using binary carbonate electrode10.1246/cl.1990.2033 ↗
5. Recent developments of the sensors for carbon oxides using solid electrolytes10.1016/0167-2738(88)90434-1 ↗
6. Ionic conductivity of solid electrolytes based on lithium titanium phosphate10.1149/1.2086597 ↗
7. Lithium anode for lithium-air secondary batteries10.1016/j.jpowsour.2008.07.080 ↗
8. NASICON-structured LiGe2(PO4)3 with improved cyclability for high-performance lithium batteries10.1021/jp9085602 ↗
9. A nasicon-type phase as intercalation electrode: NaTi2(PO4)310.1016/0025-5408(87)90112-7 ↗
10. Structure and electrochemical study of Li2xMn(1−x)TiCr(PO4)3 (x=0−0.50) with nasicon-like structure10.1016/S0151-9107(98)80037-8 ↗
11. Structural and electrochemical study of Li0.5Mn0.5Ti1.5Cr0.5(PO4)310.1006/jssc.2001.9088 ↗
12. New cathode materials for rechargeable lithium batteries: the 3-D framework structures Li3Fe2(XO4)3(X=P, As)10.1006/jssc.1997.7629 ↗
13. The nasicon-type titanium phosphates ATi2(PO4)3 (A= Li, Na) as electrode materials10.1016/S0167-2738(88)80075-4 ↗
14. Raising the cycling stability of aqueous lithium-ion batteries by eliminating oxygen in the electrolyte10.1038/nchem.763 ↗
15. Recent results on aqueous electrolyte cells10.1016/j.jpowsour.2010.10.098 ↗
16. Li∕polymer electrolyte∕water stable lithium-conducting glass ceramics composite for lithium–air secondary batteries with an aqueous electrolyte10.1149/1.2990717 ↗
17. The preparation and lithium mobility of zinc based NASICON-type solid electrolyte Li1+2x+2yAlxZnyTi2-x−ySixP3−xO1210.1016/j.ceramint.2013.08.043 ↗
18. Towards elucidating microscopic structural changes in Li-ion conductors Li1+yTi2−yAly[PO4]3 and Li1+yTi2−yAly[PO4]3−x[MO4]x10.1039/a802752h ↗
19. Characterisation and impedance spectroscopy of substituted Li1.3Al0.3Ti1.7(PO4)3−x(ZO4)x (Z = V, Nb) ceramics10.1016/S0167-2738(99)00212-X ↗
20. NMR studies of modified nasicon-like, lithium conduction solid electrolytes10.1016/S0167-2738(99)00213-1 ↗
21. Lithium insertion into Fe2(SO4)3 frameworks10.1016/0378-7753(89)80153-3 ↗
22. Tuning the position of the redox couples in materials with NASICON structure by anionic substitution10.1149/1.1838513 ↗
23. Lithium insertion into titanium phosphates, silicates, and sulfates10.1021/cm0201798 ↗
24. Accessing alkali-free NASICON-type compounds through mixed oxoanion sol-gel chemistry: hydrogen titanium phosphate sulfate, H1−xTi2(PO4)3−x(SO4)x (x=0.5−1)10.1016/j.jssc.2016.02.007 ↗
25. On the structure of Li3Ti2(PO4)310.1039/B203652P ↗
26. Physical adsorption on non-uniform surfaces10.1063/1.1746689 ↗
27. Determination of the kinetic parameters of mixed-conducting electrodes and application to the system Li3Sb10.1149/1.2133112 ↗
28. Order-disorder of the hydronium ion and low-temperature phase transition of (H3O)Zr2(PO4)3 NASICON by neutron diffraction10.1021/jp021424d ↗
29. Neutron scattering study of the dynamics of hydronium ion in (H3O)Zr2(PO4)3 Nasicon across the order - disorder transition10.1021/jp037463m ↗
30. Structural and lithium intercalation studies of Mn(0.5−x)CaxTi2(PO4)3 phases (0≤X≤0.50)10.1016/S0167-2738(02)00135-2 ↗
31. Lithium insertion into titanium phosphates, silicates and sulfates10.1021/cm0201798 ↗
32. Studies on LiFePO4 as cathode material using impedance spectroscopy10.1016/j.jpowsour.2010.09.121 ↗
33. Effect of different binders on electrochemical properties of LiFePO4/C cathode material in lithium ion batteries10.1016/j.cej.2013.08.119 ↗
34. Deactivation of TiO2 photocatalytic films loaded on aluminium: XPS and AFM analyses10.1016/j.apsusc.2005.09.023 ↗
35. XPS and IR spectral studies on the structure of phosphate and sulphate modified titania - a combined DFT and experimental study
36. Synthesis and characterization of mesoporous titanium pyrophosphate as lithium intercalation electrode materials10.1016/j.micromeso.2005.09.013 ↗
37. Structural studies of phosphate glasses with high ionic conductivity10.1016/j.jnoncrysol.2003.09.047 ↗
38. Cathode properties of pyrophosphates for rechargeable lithium batteries10.1016/S0167-2738(02)00069-3 ↗
39. Low-potential sodium insertion in a nasicon-type structure through the Ti(III)/Ti(II) redox couple10.1021/ja311044t ↗
40. Electrochemical properties of NaTi2(PO4)3 anode for rechargeable aqueous sodium-ion batteries10.1149/1.3611434 ↗
41. Synthesis of LiTi2(PO4)3-acetylene black nanocomposites for lithium ion batteries by the polyvinyl alcohol assisted sol-gel method and ball-milling10.1016/j.jpowsour.2013.01.091 ↗
42. Influence of Li-Ion kinetics in the cathodic performance of layered Li(Ni1/3Co1/3Mn1/3)O210.1149/1.1775218 ↗
43. Determination of the chemical diffusion coefficient of lithium in LiFePO410.1016/S0167-2738(02)00134-0 ↗