journal article·2016-11

Vibration mode analysis of the proton exchange membrane fuel cell stack

B. Liu, L.F. Liu, M.Y. Wei, C.W. Wu

Publisher page

Abstract

Abstract Proton exchange membrane fuel cell (PEMFC) stacks usually undergo vibration during packing, transportation, and serving time, in particular for those used in the automobiles or portable equipment. To study the stack vibration response, based on finite element method (FEM), a mode analysis is carried out in the present paper. Using this method, we can distinguish the local vibration from the stack global modes, predict the vibration responses, such as deformed shape and direction, and discuss the effects of the clamping configuration and the clamping force magnitude on vibration modes. It is found that when the total clamping force remains the same, increasing the bolt number can strengthen the stack resistance to vibration in the clamping direction, but cannot obviously strengthen stack resistance to vibration in the translations perpendicular to clamping direction and the three axis rotations. Increasing the total clamping force can increase both of the stack global mode and the bolt local mode frequencies, but will decrease the gasket local mode frequency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Mechanical stress and fatigue analysis · Hydraulic and Pneumatic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. An overview of fuel cell technology: fundamentals and applications10.1016/j.rser.2014.01.012 ↗
2. A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
3. Vibration tests on a PEM fuel cell stack usable in transportation application10.1016/j.ijhydene.2009.03.002 ↗
4. Effect of mechanical vibrations on damage propagation in polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2013.08.136 ↗
5. Physical degradation of membrane electrode assemblies undergoing freeze/thaw cycling: diffusion media effects10.1016/j.jpowsour.2007.12.114 ↗
6. Stress and plastic deformation of MEA in fuel cells: stresses generated during cell assembly10.1016/j.jpowsour.2008.02.048 ↗
7. Microstructure changes in the catalyst layers of PEM fuel cells induced by load cycling: part I. mechanical model10.1016/j.jpowsour.2007.10.006 ↗
8. Measurement of the clamping pressure distribution in polymer electrolyte fuel cells using piezoresistive sensor arrays and digital image correlation techniques10.1016/j.jpowsour.2011.06.017 ↗
9. Experimental investigation of gas-tightness and electrical insulation of fuel cell stack under strengthened road vibrating conditions10.1016/j.ijhydene.2011.07.092 ↗
10. An investigation of characteristic parameter variations of the polarization curve of a proton exchange membrane fuel cell stack under strengthened road vibrating conditions10.1016/j.ijhydene.2012.05.030 ↗
11. Experimental investigation of the steady-state efficiency of fuel cell stack under strengthened road vibrating condition10.1016/j.ijhydene.2013.01.037 ↗
12. Mechanical behaviour of a fuel cell stack under vibrating conditions linked to aircraft applications part I: experimental10.1016/j.ijhydene.2008.08.032 ↗
13. Mechanical behaviour of a fuel cell stack under vibrating conditions linked to aircraft applications part II: three-dimensional modelling10.1016/j.ijhydene.2008.08.031 ↗
14. Ballard Power Systems, Canada · 2004
15. Free vibration analysis of a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2010.10.112 ↗
16. Effect of vibrations on performance of polymer electrolyte membrane fuel cells10.1016/j.egypro.2014.07.317 ↗
17. Parametric reduced-order models of battery pack vibration including structural variation and prestress effects10.1016/j.jpowsour.2014.03.008 ↗
18. Ballard Power Systems, Canada · 2016
19. S. Unoki, E. Yasumoto, S. Shibata, H. Kusakabe. Fuel cell and method for disassembling fuel cell. US2011070520, USA, 2011.
20. B. Wozniczka, N.J. Fletcher, P.R. Gibb. Electrochemical fuel cell stack with compression bands. US599387-A, USA, 1999.
21. A new matrix perturbation method for analytical solution of the complex modal eigenvalue problem of viscously damped linear vibration systems
22. Wilson · 1996
23. Multi-objective topology optimization of end plates of proton exchange membrane fuel cell stacks10.1016/j.jpowsour.2010.08.072 ↗
24. Experimental study of clamping effects on the performances of a single proton exchange membrane fuel cell and a 10-cell stack10.1016/j.jpowsour.2009.03.058 ↗
25. A high efficient assembly technique for large PEMFC stacks part I: theory10.1016/j.jpowsour.2009.04.068 ↗
26. Characterization of mechanical behaviour and coupled electrical properties of polymer electrolyte membrane fuel cell gas diffusion layers10.1016/j.jpowsour.2008.09.026 ↗
27. Nonlinear orthotropic model of the inhomogeneous assembly compression of PEM fuel cell gas diffusion layers10.1016/j.ijhydene.2011.05.152 ↗
28. Characterization of PEMFCs gas diffusion layers properties10.1016/j.jpowsour.2005.08.013 ↗
29. MatWeb · 2016
30. Fatigue life estimation of an engine rubber mount10.1016/j.ijfatigue.2003.08.025 ↗
31. An experimental investigation of humidity and temperature effects on the mechanical properties of perfluorosulfonic acid membrane10.1016/j.msea.2006.03.055 ↗
32. Localization phenomena in mistuned assemblies with cyclic symmetry part I: free vibration10.1115/1.3269547 ↗
33. Mechanical degradation of fuel cell membranes under fatigue fracture tests10.1016/j.jpowsour.2014.10.135 ↗
34. Real time modelling of the dynamic mechanical behaviour of PEMFC thanks to neural networks10.1016/j.engappai.2012.09.014 ↗
35. Reliability evaluation of an open-cathode PEMFC at operating state and longtime vibration by mechanical loads10.1002/fuce.201500144 ↗
36. Effect of strengthened road vibration on performance degradation of PEM fuel cell stack10.1016/j.ijhydene.2016.01.072 ↗