Poly(vinylimidazole) radiografted PVDF nanospheres as alternative binder for high temperature PEMFC electrodes
Source abstract
Abstract
Within the framework of high-temperature polymer fuel cells doped with phosphoric acid, we investigate the replacement of the conventional binder in the catalyst layers by functionalized solid PVDF nanospheres. Aim of this study is to develop and test an innovative binder which might create enhanced electrode porosity and acid distribution. Aqueous suspensions of PVDF nanospheres (d ~ 200 nm) are obtained by radical emulsion polymerization and are functionalized by Vinyl-Imidazole (VI) groups via in situ g-radiation. As a consequence the nanospheres can interact with H3PO4 to obtain proton conductivity. Catalyst inks are prepared mixing the nanospheres with commercial Pt/C electrocatalyst powder, solvents and phosphoric acid. Prototype electrodes are deposited by spraying and preliminary fuel cell tests are carried out at 160 C under dry H2/air. Electrodes with grafted PVDF nanospheres as solid binder are demonstrated and its understanding is in progress. Further improvements are outlined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. High temperature proton exchange membranes based on polybenzimidazoles for fuel cells10.1016/j.progpolymsci.2008.12.003 ↗
2. Pumpless thermal management of water-cooled high-temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2010.12.108 ↗
3. Long term testing of start-stop cycles on high temperature PEM fuel cell stack10.1016/j.jpowsour.2014.11.115 ↗
4. Long-term testing of a high-temperature proton exchange membrane fuel cell short stack operated with improved polybenzimidazole-based composite membranes10.1016/j.jpowsour.2014.08.136 ↗
5. Membrane electrode assembly with enhanced platinum utilization for high temperature proton exchange membrane fuel cell prepared by catalyst coating membrane method10.1016/j.jpowsour.2014.05.014 ↗
6. Low platinum loading for high temperature proton exchange membrane fuel cell developed by ultrasonic spray coating technique10.1016/j.jpowsour.2014.05.086 ↗
7. Phosphate-tolerant oxygen reduction catalysts10.1021/cs500807v ↗
8. Experimental study of water transport in a polybenzimidazole-based high temperature PEMFC10.1016/j.ijhydene.2011.09.159 ↗
9. Design of an assembly of poly(benzimidazole), carbon nanotubes, and Pt nanoparticles for a fuel-cell electrocatalyst with an ideal interfacial nanostructure10.1002/smll.200801742 ↗
10. A highly durable fuel cell electrocatalyst based on polybenzimidazole-coated stacked graphene10.1039/c3ta14469k ↗
11. M.R. Berber, T. Fujigaya, K. Sasaki, N. Nakashima, Remarkably durable high temperature polymer electrolyte fuel cell based on poly(vinylphosphonic acid)-doped polybenzimidazole, Nat. Sci. Rep. 3, 1764, http://dx.doi.org/10.1038/srep01764.10.1038/srep01764 ↗
12. Preparation and characterization of Pt on modified multi-wall carbon nanotubes to be used as electrocatalysts for high temperature fuel cell applications10.1016/j.apcatb.2011.05.043 ↗
13. Ion track grafting: a way of producing low-cost and highly proton conductive membranes for fuel cell applications10.1016/j.jpowsour.2009.07.016 ↗
14. Synthesis of specific nanoparticles for targeting tumor angiogenesis using electron-beam irradiation10.1016/j.radphyschem.2009.09.007 ↗
15. “Click” conjugation of peptide on the surface of polymeric nanoparticles for targeting tumor angiogenesis10.1007/s11095-011-0398-5 ↗
16. The importance of ultrasonic parameters in the preparation of fuel cell catalyst inks10.1016/j.electacta.2013.09.160 ↗
17. On the activation of polybenzimidazole-based membrane electrode assemblies doped with phosphoric acid10.1016/j.ijhydene.2012.07.032 ↗