Linking the discharge behavior and microstructure of ternary Mg–Ca–Zn alloy anodes for magnesium-air cells
Source abstract
Abstract
Three Mg–1Ca–1Zn (wt.%) alloy anodes with distinct microstructure characteristics (As-cast, water-cooled (WC) and furnace-cooled (FC)) are prepared by casting and homogenization treatment followed by different cooling methods. The relationship between microstructure and discharge behavior is systematically investigated. Due to the severe self-corrosion and discharge products adhesion caused by the formation of a large number of micro-galvanic couples, the As-cast anode shows the worst discharge performance. After homogenization treatment, the FC anode possesses an increased peak anodic efficiency of 56.6% and discharge capacity of 1250.11 mAh g −1 at 10 mA cm −2 , however, the “chunk effect" induced by the linkage of discharge channels at the triple line boundary restricts cell efficiency. The WC anode exhibits the highest cell voltage at all discharge current densities, which is attributed to the high electrochemical activity and easily exfoliated discharge product layers. A novel discharge mechanism of the linear dissolution of α-Mg across grain boundaries results in uniform dissolution of the anode matrix, mitigative hydrogen evolution and smooth discharge pits. The WC anode exhibits the highest anodic efficiency of 62.9% and specific capacity of 1388.9 mA h g −1 at 10 mA cm −2 , making it a promising anode material for Mg-air cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Metal–air batteries: will they Be the future electrochemical energy storage device of choice?10.1021/acsenergylett.7b00119 ↗
2. A comprehensive review of the development of magnesium anodes for primary batteries10.1039/D1TA01471D ↗
3. Magnesium alloys as anodes for neutral aqueous magnesium-air batteries10.1016/j.jma.2021.04.011 ↗
4. Effects of Al and Sn on microstructure, corrosion behavior and electrochemical performance of Mg–Al-based anodes for magnesium-air batteries10.1016/j.jallcom.2020.157755 ↗
5. Revealing the influence of crystallographic orientation on the electrochemical and discharge behaviors of extruded diluted Mg–Sn–Zn–Ca alloy as anode for Mg-air battery10.1016/j.jpowsour.2021.230802 ↗
6. Role of micro-Ca/In alloying in tailoring the microstructural characteristics and discharge performance of dilute Mg-Bi-Sn-based alloys as anodes for Mg-air batteries
7. The discharge performance of an as-extruded Mg-Zn-La-Ce anode for the primary Mg-air battery10.1016/j.electacta.2021.139763 ↗
8. Microstructure effects on the electrochemical corrosion properties of Mg – 4.1% Ga – 2.2% Hg alloy as the anode for seawater-activated batteries10.1016/j.corsci.2011.01.040 ↗
9. Discharge behavior of Mg–4wt%Ga–2wt%Hg alloy as anode for seawater activated battery10.1016/j.electacta.2011.06.065 ↗
10. Wrought Mg-Al-Pb-RE alloy strips as the anodes for Mg-air batteries10.1016/j.jpowsour.2019.226855 ↗
11. Corrosion and discharge performance of Mg–9%Al–2.5%Pb alloy as anode for seawater activated battery10.1016/S1003-6326(16)64330-3 ↗
12. Effects of alloying elements on the microstructure and corrosion behavior of Mg–Li–Al–Y alloys10.1016/j.jallcom.2020.154344 ↗
13. Clarifying the roles of grain boundary and grain orientation on the corrosion and discharge processes of α-Mg based Mg-Li alloys for primary Mg-air batteries10.1016/j.jmst.2020.05.067 ↗
14. The influence of Ga alloying on Mg-Al-Zn alloys as anode material for Mg-air primary batteries10.1016/j.electacta.2021.139372 ↗
15. Influence of heat treatment on the discharge performance of Mg-Al and Mg-Zn alloys as anodes for the Mg-air battery10.1016/j.cej.2021.133797 ↗
16. Mg-Ca binary alloys as anodes for primary Mg-air batteries10.1016/j.jpowsour.2018.05.090 ↗
17. Electrochemical behaviors and discharge performance of Mg-Sn binary alloys as anodes for Mg-air batteries10.1088/2053-1591/ac4439 ↗
18. Influence of homogenization treatment on corrosion behavior and discharge performance of the Mg–2Zn–1Ca anodes for primary Mg-air batteries10.1016/j.matchemphys.2022.125802 ↗
19. Effect of heat treatment on the mechanical and biocorrosion behaviour of two Mg-Zn-Ca alloys10.1016/j.jma.2021.06.022 ↗
20. The influence of heat treatment on discharge and electrochemical properties of Mg-Gd-Zn magnesium anode with long period stacking ordered structure for Mg-air battery10.1016/j.electacta.2020.137518 ↗
21. The high corrosion-resistance of ultra-high purity Mg–Ge alloy and its discharge performance as anode for Mg–air battery10.1016/j.electacta.2023.142127 ↗
22. AZ61 and AZ61-La alloys as anodes for Mg-air battery10.1007/s11665-019-03985-5 ↗
23. Discharge performance of extruded Mg-Bi binary alloys as anodes for primary Mg-air batteries10.1016/j.jallcom.2021.161271 ↗
24. Effect of Ce content on performance of AZ31 magnesium alloy anode in air battery10.1016/j.jallcom.2021.161914 ↗
25. Discharge properties and electrochemical behaviors of AZ80-La-Gd magnesium anode for Mg-air battery10.1016/j.jma.2020.07.008 ↗
26. Effects of the combinative Ca, Sm and La additions on the electrochemical behaviors and discharge performance of the as-extruded AZ91 anodes for Mg-air batteries10.1016/j.jpowsour.2018.12.092 ↗
27. Microstructure and discharge performance of Mg–6Al and Mg–6Al-0.5Er alloys10.1016/j.matchemphys.2022.125822 ↗
28. Revealing the impact of second phase morphology on discharge properties of binary Mg-Ca anodes for primary Mg-air batteries10.1016/j.corsci.2019.03.050 ↗
29. Effect of the second phases on corrosion behavior of the Mg-Al-Zn alloys10.1016/j.jallcom.2016.11.100 ↗
30. Influence of specific second phases on corrosion behaviors of Mg-Zn-Gd-Zr alloys10.1016/j.corsci.2019.108419 ↗
31. Effect of second phases on discharge properties and corrosion behaviors of the Mg-Ca-Zn anodes for primary Mg-air batteries10.1016/j.jallcom.2020.158493 ↗
32. Relationship between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys10.1016/j.corsci.2012.07.015 ↗
33. Effects of Zn on the microstructure, mechanical property and bio-corrosion property of Mg–3Ca alloys for biomedical application10.1016/j.matchemphys.2010.10.015 ↗
34. Effects of Ca addition on microstructure, electrochemical behavior and magnesium-air battery performance of Mg-2Zn-xCa alloys10.1016/j.jelechem.2021.115944 ↗
35. Microstructure, mechanical properties and bio-corrosion properties of Mg–Zn–Mn–Ca alloy for biomedical application10.1016/j.msea.2008.06.019 ↗
36. Influence of Ca and Zn on the microstructure and corrosion of biodegradable Mg–Ca–Zn alloys10.1016/j.corsci.2015.01.027 ↗
37. Effects of heat treatment on the discharge behavior of Mg-6wt.%Al-1wt.%Sn alloy as anode for magnesium-air batteries10.1007/s11665-017-2733-4 ↗
38. Effect of heat treatment on electrochemical properties of Mg–9 wt.%Al–2.5 wt.%Pb alloy in sodium chloride solution10.1007/s11837-017-2276-z ↗
39. Tailoring the microstructure of Mg-Al-Sn-RE alloy via friction stir processing and the impact on its electrochemical discharge behaviour as the anode for Mg-air battery
40. An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys
41. Effect of the microstructure parameters on the corrosion characteristics of Mg-Zn-Ca alloy with columnar structure
42. Influence of the β-phase morphology on the corrosion of the Mg alloy AZ9110.1016/j.corsci.2008.04.010 ↗
43. Microstructure, mechanical and corrosion properties of Mg–Dy–Gd–Zr alloys for medical applications10.1016/j.actbio.2013.03.017 ↗
44. Role of trace additions of Ca and Sn in improving the corrosion resistance of Mg-3Al-1Zn alloy10.1007/s12613-021-2268-4 ↗
45. Mechanical properties and electronic structures of MgCu2, Mg2Ca and MgZn2 Laves phases by first principles calculations
46. Microstructure and bio-corrosion behavior of Mg-Zn and Mg-Zn-Ca alloys for biomedical applications10.1002/maco.201307588 ↗
47. Effect of calcium content on the microstructure, hardness and in-vitro corrosion behavior of biodegradable Mg-Ca binary alloy10.1590/S1516-14392012005000151 ↗
48. The discharge performance of Mg-3In-xCa alloy anodes for Mg–air batteries10.3390/coatings12040428 ↗
49. Evolution of precipitation during non-isothermal ageing of an Mg–Ca–Zn alloy with high Ca content10.1016/j.msea.2012.01.038 ↗
50. Microstructure and battery performance of Mg-Zn-Sn alloys as anodes for magnesium-air battery10.1016/j.jma.2021.08.022 ↗
51. Effects of secondary phase and grain size on the corrosion of biodegradable Mg–Zn–Ca alloys10.1016/j.msec.2014.12.049 ↗
52. Effect of heat treatment on corrosion behaviors of Mg-5Y-1.5Nd alloys10.1155/2016/7097589 ↗
53. Influence of heat treatment and microstructure on the corrosion of magnesium alloy Mg-10Gd-3Y-0.4Zr10.1007/s10800-008-9739-4 ↗
54. Understanding magnesium corrosion—a framework for improved alloy performance10.1002/adem.200310405 ↗
55. Corrosion behavior of Mg–Ca–Zn alloys with high Zn content10.1016/j.jpcs.2021.109952 ↗
56. Electrochemical behaviors and discharge performance of the as-extruded Mg-1.5 wt%Ca alloys as anode for Mg-air battery10.1016/j.jallcom.2019.03.260 ↗
57. Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–X alloys: X=Mn, Sn, Ca, Zn, Al, Zr, Si, Sr10.1016/j.corsci.2013.06.030 ↗
58. Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluids10.1557/jmr.2007.0233 ↗
59. Study of cerium and lanthanum conversion coatings on AZ63 magnesium alloy surface10.1016/S1875-5372(15)30030-8 ↗
60. Microstructure and discharge performance of Mg-La alloys as the anodes for primary magnesium-air batteries10.1016/j.jallcom.2022.165803 ↗
61. Electrochemical properties and discharge performance of Mg-3Sn-xCa alloy as a novel anode for Mg-air battery10.1016/j.jallcom.2022.167849 ↗
62. Improving the electrochemical behaviors and discharge performance of as-rolled Mg-4Li alloys through multicomponent alloying10.1016/j.jallcom.2021.162536 ↗
63. Amorphous magnesium alloy with high corrosion resistance fabricated by laser powder bed fusion10.1016/j.jallcom.2021.163247 ↗
64. Influence of zinc on electrochemical discharge activity of Mg-6%Al-5%Pb anode10.1007/s11771-012-0965-x ↗
65. Clarifying the decisive factors for utilization efficiency of Mg anodes for primary aqueous batteries10.1016/j.jpowsour.2019.227201 ↗
66. Effect of grain size and crystal orientation on the corrosion behavior of as-extruded Mg-6Gd-2Y-0.2Zr alloy10.1016/j.corsci.2019.108338 ↗