journal article·2022-12

Optimization of graphite/silicon-based composite electrodes for lithium ion batteries regarding the interdependencies of active and inactive materials

Karina Ambrock, Mirco Ruttert, Andrey Vinograd, Bastian Billmann, Xiaofei Yang, Tobias Placke, Martin Winter, Markus Börner

Publisher page

Abstract

Due to its high theoretical capacity, silicon is a promising active material candidate for the negative electrode of lithium ion batteries. One way to reduce the severe degradation of silicon during charge/discharge cycling, is to use blends of different active materials and a well-balanced ratio of active and inactive materials. To ensure high-energy densities while still maintaining good electronic conductivity and ionic mobility, the necessity of nano-scale conductive carbons within a graphite/silicon composite was evaluated in this study. In particular, the correlation of silicon particle size and the presence of conductive additive was studied in electrodes, predominantly consisting of graphite (15 wt% silicon). Carbon black as conductive additive has a high contact surface area, which can enhance the electronic conductivity within the electrode and thus the rate capability, however, it can also propagate parasitic side reactions. It was determined that composite electrodes containing micron-sized silicon particles depend on the addition of conductive additives with regard to electrochemical performance. Due to high contact area and small transport distances, electrodes based on nano-sized silicon showed comparable capacity retention and a higher specific discharge capacity. Omitting conductive particles from these composite electrodes allowed lower binder amounts, while maintaining a good mechanical electrode integrity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. Performance and cost of materials for lithium-based rechargeable automotive batteries10.1038/s41560-018-0107-2 ↗
2. Before Li ion batteries10.1021/acs.chemrev.8b00422 ↗
3. A review of the electrochemical performance of alloy anodes for lithium-ion batteries10.1016/j.jpowsour.2010.07.020 ↗
4. Thermodynamic properties of the lithium-silicon system10.1149/1.2132692 ↗
5. All-solid lithium electrodes with mixed-conductor matrix10.1149/1.2127495 ↗
6. Challenges and recent progress in the development of Si anodes for lithium-ion battery10.1002/aenm.201700715 ↗
7. Li-alloy based anode materials for Li secondary batteries10.1039/b919877f ↗
8. Lithium ion, lithium metal, and alternative rechargeable battery technologies: the odyssey for high energy density10.1007/s10008-017-3610-7 ↗
9. In situ TEM of two-phase lithiation of amorphous silicon nanospheres10.1021/nl3044508 ↗
10. 25th anniversary article: understanding the lithiation of silicon and other alloying anodes for lithium-ion batteries10.1002/adma.201301795 ↗
11. Challenges in accommodating volume change of Si anodes for Li-ion batteries10.1002/celc.201500254 ↗
12. A study of lithium ion intercalation induced fracture of silicon particles used as anode material in Li-ion battery10.1016/j.jpowsour.2011.05.049 ↗
13. Willenberg · 2020
14. Solid electrolyte interphase (SEI) electrodes. Part 1. The kinetics of lithium in LiAlCl 4 -SOCl 210.1002/ijch.197900016 ↗
15. The solid electrolyte interphase – the most important and the least understood solid electrolyte in rechargeable Li batteries10.1524/zpch.2009.6086 ↗
16. Running out of lithium? A route to differentiate between capacity losses and active lithium losses in lithium-ion batteries10.1039/C7CP05405J ↗
17. Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries10.1016/S0378-7753(00)00431-6 ↗
18. Surface chemistry and morphology of the solid electrolyte interphase on silicon nanowire lithium-ion battery anodes10.1016/j.jpowsour.2009.01.007 ↗
19. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries10.1016/j.electacta.2010.05.072 ↗
20. Designing nanostructured Si anodes for high energy lithium ion batteries10.1016/j.nantod.2012.08.004 ↗
21. Research progress regarding Si-based anode materials towards practical application in high energy density Li-ion batteries10.1039/C6QM00302H ↗
22. Confronting issues of the practical implementation of Si anode in high-energy lithium-ion batteries10.1016/j.joule.2017.07.006 ↗
23. Integration of graphite and silicon anodes for the commercialization of high-energy lithium-ion batteries10.1002/anie.201902085 ↗
24. Investigations on novel electrolytes, solvents and SEI additives for use in lithium-ion batteries: systematic electrochemical characterization and detailed analysis by spectroscopic methods10.1016/j.progsolidstchem.2014.04.003 ↗
25. Synergistic effect of blended components in nonaqueous electrolytes for lithium ion batteries
26. Tailoring electrolyte additives with synergistic functional moieties for silicon negative electrode-based lithium ion batteries: a case study on lactic acid O -carboxyanhydride10.1021/acs.chemmater.9b03173 ↗
27. Schmiegel, J.-P.; Nölle, R.; Henschel, J.; Quach, L.; Nowak, S.; Winter, M.; Glorius, F.; Placke, T. Case study of N-carboxyanhydrides in silicon-based lithium ion cells as a guideline for systematic electrolyte additive research. Cell Rep. Phy. Sci. 2021, 100327. DOI: 10.1016/j.xcrp.2021.100327.10.1016/j.xcrp.2021.100327 ↗
28. The role of electrolyte additives on the interfacial chemistry and thermal reactivity of Si-Anode-Based Li-ion battery10.1021/acsaem.9b01094 ↗
29. Structured silicon anodes for lithium battery applications10.1149/1.1563094 ↗
30. Visualization of degradation mechanisms of negative electrodes based on silicon nanoparticles in lithium-ion batteries via quasi in situ scanning electron microscopy and energy-dispersive X-ray spectroscopy10.1021/acs.jpcc.2c03294 ↗
31. A high tap density secondary silicon particle anode fabricated by scalable mechanical pressing for lithium-ion batteries10.1039/C5EE01363A ↗
32. Size-dependent fracture of silicon nanoparticles during lithiation10.1021/nn204476h ↗
33. Lithium storage alloys as anode materials for lithium ion batteries
34. A step towards understanding the beneficial influence of a LIPON-based artificial SEI on silicon thin film anodes in lithium-ion batteries10.1039/C7NR06568J ↗
35. Self-healing SEI enables full-cell cycling of a silicon-majority anode with a coulombic efficiency exceeding 99.910.1039/C6EE02685K ↗
36. Recent advancement of SiOx based anodes for lithium-ion batteries10.1016/j.jpowsour.2017.07.073 ↗
37. One-to-One comparison of graphite-blended negative electrodes using silicon nanolayer-embedded graphite versus commercial benchmarking materials for high-energy lithium-ion batteries10.1002/aenm.201700071 ↗
38. Evaluating Si-based materials for Li-ion batteries in commercially relevant negative electrodes10.1149/2.066405jes ↗
39. Theoretical limits of energy density in silicon-carbon composite anode based lithium ion batteries10.1038/srep27449 ↗
40. Design of porous Si/C–graphite electrodes with long cycle stability and controlled swelling10.1039/C7EE00838D ↗
41. A facile, low-cost synthesis of high-performance silicon-based composite anodes with high tap density for lithium-ion batteries10.1039/C4TA06113F ↗
42. Differentiating the degradation phenomena in silicon-graphite electrodes for lithium-ion batteries10.1149/2.1921712jes ↗
43. A yolk-shell design for stabilized and scalable li-ion battery alloy anodes10.1021/nl3014814 ↗
44. In situ conductivity, impedance spectroscopy, and ex situ Raman spectra of amorphous silicon during the insertion/extraction of lithium10.1021/jp0729563 ↗
45. Guo · 2019
46. Understanding the influence of conductive carbon additives surface area on the rate performance of LiFePO4 cathodes for lithium ion batteries10.1016/j.carbon.2013.07.083 ↗
47. Influence of inactive electrode components on degradation phenomena in nano-Si electrodes for Li-ion batteries10.1016/j.jpowsour.2016.06.059 ↗
48. Artificial solid-electrolyte interphase (SEI) for improved cycleability and safety of lithium–ion cells for EV applications10.1016/j.elecom.2009.07.019 ↗
49. A guide to Li-ion coin-cell electrode making for academic researchers10.1149/1.3515072 ↗
50. Mechanism of interactions between CMC binder and Si single crystal facets10.1021/la501791q ↗
51. Lithium batteries and cathode materials10.1021/cr020731c ↗
52. Ultimate limits to intercalation reactions for lithium batteries10.1021/cr5003003 ↗
53. Progress in flexible lithium batteries and future prospects10.1039/C3EE43182G ↗
54. Reversible capacity of conductive carbon additives at low potentials: caveats for testing alternative anode materials for Li-ion batteries10.1149/2.0971702jes ↗
55. Si-on-Graphite fabricated by fluidized bed process for high-capacity anodes of Li-ion batteries
56. Evaluating electrolyte additives for lithium-ion cells: a new Figure of Merit approach10.1016/j.jpowsour.2017.08.093 ↗
57. Influence of high intensive dry mixing and calendering on relative electrode resistivity determined via an advanced two point approach10.1016/j.est.2017.02.001 ↗
58. Stress evolution and capacity fade in constrained lithium-ion pouch cells10.1016/j.jpowsour.2013.06.165 ↗
59. Impact of the silicon particle size on the pre-lithiation behavior of silicon/carbon composite materials for lithium ion batteries10.1016/j.jpowsour.2020.228224 ↗
60. Optimization of Graphite–SiO blend electrodes for lithium-ion batteries: stable cycling enabled by single-walled carbon nanotube conductive additive10.1016/j.jpowsour.2020.227711 ↗
61. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
62. The interaction of consecutive process steps in the manufacturing of lithium-ion battery electrodes with regard to structural and electrochemical properties10.1016/j.jpowsour.2016.05.127 ↗
63. Influence of dry mixing and distribution of conductive additives in cathodes for lithium ion batteries10.1016/j.jpowsour.2015.04.081 ↗
64. Electrode engineering of nanoparticles for lithium-ion batteries—role of dispersion technique10.1016/j.jpowsour.2008.09.091 ↗
65. Electrochemical binding and wiring in battery materials10.1016/j.jpowsour.2008.02.046 ↗
66. Change of conductivity with salt content, solvent composition, and temperature for electrolytes of LiPF[sub 6] in ethylene carbonate-ethyl methyl carbonate10.1149/1.1403730 ↗
67. Investigations on the electrochemical decomposition of the electrolyte additive vinylene carbonate in Li metal half cells and lithium ion full cells10.1016/j.jpowsour.2016.09.100 ↗
68. Ionic conduction in lithium ion battery composite electrode governs cross-sectional reaction distribution10.1038/srep26382 ↗
69. Accurate determination of coulombic efficiency for lithium metal anodes and lithium metal batteries10.1002/aenm.201702097 ↗
70. Nanostructured materials for advanced energy conversion and storage devices10.1038/nmat1368 ↗
71. A reality check and tutorial on electrochemical characterization of battery cell materials: how to choose the appropriate cell setup10.1016/j.mattod.2019.07.002 ↗
72. Graphites for lithium-ion cells: the correlation of the first-cycle charge loss with the brunauer-emmett-teller surface area10.1149/1.1838281 ↗
73. The truth about the 1st cycle Coulombic efficiency of LiNi1/3Co1/3Mn1/3O2 (NCM) cathodes10.1039/C5CP07718D ↗
74. Learning from electrochemical data: simple evaluation and classification of LiMO 2 -type-based positive electrodes for Li-ion batteries10.1002/ente.201700068 ↗
75. Performance of high-power lithium-ion cells under pulse discharge and charge conditions10.1002/er.1665 ↗
76. Influence of temperature on the aging behavior of 18650-type lithium ion cells: a comprehensive approach combining electrochemical characterization and post-mortem analysis10.1016/j.jpowsour.2016.12.040 ↗
77. Capacity fading mechanisms of silicon nanoparticle negative electrodes for lithium ion batteries10.1149/2.0731512jes ↗
78. Studies on the anode/electrolyte interface in lithium ion batteries
79. Electrode behavior RE-visited: monitoring potential windows, capacity loss, and impedance changes in Li 1.03 (Ni 0.5 Co 0.2 Mn 0.3) 0.97 O 2/Silicon-Graphite full cells10.1149/2.0271606jes ↗
80. Layered oxide, graphite and silicon-graphite electrodes for lithium-ion cells: effect of electrolyte composition and cycling windows10.1149/2.0131701jes ↗