Superhydrophobic fluorinated carbon powders for improved water management in hydrogen fuel cells
Source abstract
Abstract
Under high current density operation, the efficiency of polymer electrolyte fuel cells (PEFCs) can dramatically decrease. This is due to water accumulation at the cathode side, preventing oxygen diffusion to the electrocatalyst. As such, effective water management is of vital importance by use of a suitable gas diffusion layer (GDL) and/or microporous layer (MPL). MPLs generally consist of carbon black as the porous electron conducting phase, and polytetrafluoroethylene (PTFE) as a hydrophobic binder. Here, we instead use superhydrophobic fluorinated carbon powder in the MPL as a novel material to decrease the required PTFE content. It is confirmed that the water contact angle of the MPL can be increased from 131° to 151° by using fluorinated carbon. Moreover, the fluorinated carbon MPL shows lower oxygen transport resistance at high humidity. Furthermore, in single fuel cell tests at various temperatures and relative humidity values, the I–V performance is significantly and consistently better than for the conventional MPL. These results confirm that fluorinated carbon is a promising new material for water management in the MPLs of PEFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Supercapacitor Materials and Fabrication · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Is the use of renewable energy sources an answer to the problems of global warming and pollution?10.1080/10643389.2010.498754 ↗
2. Global warming and renewable energy sources for sustainable development: a case study in Turkey10.1016/j.rser.2006.07.016 ↗
3. Global warming and renewable energy sources for sustainable development in Turkey10.1016/j.renene.2007.05.040 ↗
4. Sasaki · 2016
5. Role of binders in high temperature PEMFC electrode10.1149/1.3573773 ↗
6. Lyth · 2019
7. Durability of template-free Fe-N-C foams for electrochemical oxygen reduction in alkaline solution10.1016/j.jpowsour.2017.07.025 ↗
8. A fully spray-coated fuel cell membrane electrode assembly using Aquivion ionomer with a graphene oxide/cerium oxide interlayer10.1016/j.jpowsour.2017.03.085 ↗
9. Moseley · 2001
10. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
11. Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells, Electrochim
12. Effect of polytetrafluoroethylene-treatment and microporous layer-coating on the electrical conductivity of gas diffusion layers used in proton exchange membrane fuel cells10.1016/j.jpowsour.2009.11.069 ↗
13. Hydrophobic gas-diffusion media for polymer-electrolyte fuel cells by direct fluorination10.1149/2.0411514jes ↗
14. A review of the microporous layer in proton exchange membrane fuel cells: materials and structural designs based on water transport mechanism10.1016/j.rser.2021.111998 ↗
15. Structure majorization on the surface of microporous layer in polymer electrolyte membrane fuel cells to optimize performance and durability10.1016/j.enconman.2021.114319 ↗
16. Structural design of gas diffusion layer for proton exchange membrane fuel cell at varying humidification10.1016/j.jpowsour.2020.228355 ↗
17. Impact of micro-porous layer on liquid water distribution at the catalyst layer interface and cell performance in a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2015.04.095 ↗
18. Gas permeability, wettability and morphology of gas diffusion layers before and after performing a realistic ex-situ compression test10.1016/j.renene.2019.11.109 ↗
19. On the gas permeability of the microporous layer used in polymer electrolyte fuel cells10.1016/j.joei.2017.09.006 ↗
20. On the through-plane permeability of microporous layer-coated gas diffusion layers used in proton exchange membrane fuel cells10.1016/j.ijhydene.2010.09.012 ↗
21. The effects of the composition of microporous layers on the permeability of gas diffusion layers used in polymer electrolyte fuel cells10.1016/j.ijhydene.2016.09.160 ↗
22. Impact of microporous layer pore properties on liquid water transport in PEM fuel cells: carbon black type and perforation10.1149/2.1321714jes ↗
23. Carbon black vs. black carbon and other airborne materials containing elemental carbon: physical and chemical distinctions10.1016/j.envpol.2013.06.009 ↗
24. On the role of the microporous layer in PEMFC operation10.1016/j.elecom.2008.12.053 ↗
25. Water management characteristics of electrospun micro-porous layer in PEMFC under normal temperature and cold start conditions10.1016/j.ijhydene.2020.05.271 ↗
26. Effects of microstructure characteristics of gas diffusion layer and microporous layer on the performance of PEMFC10.1016/j.enconman.2009.11.011 ↗
27. Electrochemically produced graphene for microporous layers in fuel cells10.1002/cssc.201600351 ↗
28. Effect of thickness and hydrophobic polymer content of the gas diffusion layer on electrode flooding level in a PEMFC10.1149/1.2006487 ↗
29. Effect of PTFE loading of gas diffusion layers on the performance of proton exchange membrane fuel cells running at high-efficiency operating conditions10.1002/er.2968 ↗
30. Solvothermal synthesis of superhydrophobic hollow carbon nanoparticles from a fluorinated alcohol10.1039/C5NR03484A ↗
31. Boltalina · 2016
32. Fabrication and superhydrophobicity of fluorinated carbon fabrics with micro/nanoscaled two-tier roughness10.1016/j.carbon.2008.04.026 ↗
33. Fluorination of single-wall carbon nanotubes10.1016/S0009-2614(98)01026-4 ↗
34. Fluorination of carbon nanotubes in CF4 plasma10.1063/1.1611621 ↗
35. Fluorination of carbon nanotubes − A review10.1016/j.jfluchem.2017.06.018 ↗
36. Lee · 2017
37. Surface characteristics of fluorine-modified PAN-based carbon fibers10.1016/S0008-6223(02)00384-6 ↗
38. Reactivity of carbon nanofibers with fluorine gas10.1021/cm061731m ↗
39. Preparation of fluorinated graphene to study its gas sensitivity10.1039/C8RA03451F ↗
40. Synthesis of fluorine-doped multi-layered graphene sheets by arc-discharge10.1039/c2ra20593a ↗
41. Graphite fluorides prepared at room temperature 1. Synthesis and characterization10.1016/0379-6779(88)90338-4 ↗
42. Fluorination of graphene: a Spectroscopic and microscopic study10.1021/nn406333f ↗
43. Fluorination of carbon blacks: an X-ray photoelectron spectroscopy study: I. A literature review of XPS studies of fluorinated carbons. XPS investigation of some reference compounds10.1016/S0008-6223(96)00095-4 ↗
44. Fluorination of carbon black10.1016/0008-6223(79)90009-5 ↗
45. Applicative performances of fluorinated carbons through fluorination routes: a review10.1016/j.jfluchem.2011.06.013 ↗
46. Hall · 2012
47. Improved gas sensing of electrospun carbon fibers based on pore structure, conductivity and surface modification10.1016/j.carbon.2010.03.045 ↗
48. Fluorinated carbon materials and the applications in energy storage systems
49. Progress towards high-power Li/CFx batteries: electrode architectures using carbon nanotubes with CFx10.1039/C5CP03217B ↗
50. Characterization of Pt supported on commercial fluorinated carbon as cathode catalysts for Polymer Electrolyte Membrane Fuel Cell10.1016/j.ijhydene.2017.04.255 ↗
51. Utilization of graphitized and fluorinated carbon as platinum nanoparticles supports for application in proton exchange membrane fuel cell cathodes10.1016/j.jpowsour.2018.10.004 ↗
52. First insight into fluorinated Pt/carbon aerogels as more corrosion-resistant electrocatalysts for proton exchange membrane fuel cell cathodes10.1007/s12678-015-0267-9 ↗
53. Carbon black CP 1333-86-4. https://www.sigmaaldrich.com/JP/en/product/saj/051530. (accessed July 28, 2022).
54. Polytetrafluoroethylene (TeflonTM 30B) 60 wt % Dispersion. https://www.polysciences.com/india/poly-teflon-30b (accessed July 28, 2022).
55. Impact of microporous layer pore properties on liquid water transport in PEM fuel cells: carbon black type and perforation10.1149/2.1321714jes ↗
56. Interaction of pore size and hydrophobicity/hydrophilicity for improved oxygen and water transport through microporous layers10.1149/2.1111913jes ↗
57. Gas diffusion layer for proton exchange membrane fuel cells-A review10.1016/j.jpowsour.2009.04.005 ↗
58. Correlating cathode microstructure with PEFC performance using FIB-SEM and TEM10.1149/2.0581709jes ↗
59. Microporous layer-coated gas diffusion layer to reduce oxygen transport resistance in a polymer electrolyte fuel cell under high humidity conditions10.1016/j.ijhydene.2016.04.117 ↗
60. Diffusion media materials and characterisation10.1002/9780470974001.f303046 ↗
61. 1998
62. Measurement of oxygen gas transport resistance in cathode catalyst layers of PEFC10.1149/MA2014-01/18/811 ↗
63. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
64. Improvement of the mechanical durability of micro porous layer in a proton exchange membrane fuel cell by elimination of surface cracks10.1016/j.renene.2012.04.011 ↗
65. A case study sizing Nanoparticles
66. X-ray photoemission spectroscopy study of fluorinated single-walled carbon nanotubes10.1063/1.1482801 ↗
67. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗