Influence of fuel reforming with low water to carbon ratio on thermodynamic performance of aviation solid oxide fuel cell - gas turbine hybrid system
Source abstract
Abstract
In this paper, a novel aviation solid oxide fuel cell-gas turbine (SOFC-GT) hybrid system based on n-decane reforming with low water to carbon ratio (S/C) is studied. The system not only improves the power generation performance but also reduces the weight penalty caused by the large demand for water in fuel reforming process. Therefore, by establishing the system model, the effects of reforming parameters on the performance of reforming, SOFC and the system at low S/C are analyzed in turn. And the safe range of reforming parameters is determined by taking carbon formation, excessive temperature gradient and temperature of SOFC as the safety boundary. The results show that high S/C, oxygen to carbon ratio (O/C) and reforming temperature inhibit carbon formation. The SOFC temperature gradient is affected by SOFC efficiency and excess air ratio. Therefore, changing reforming temperature or substance ratio is an effective way to reduce the SOFC temperature gradient. When the reforming temperature is 1023 K, the area of safety region reaches the maximum within the substance ratio studied. The S/C has little effect on system efficiency, while low O/C and high reforming temperature effectively improve system efficiency, but it also increases the size of air preheater significantly.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Technological, economic and environmental prospects of all-electric aircraft[J]10.1038/s41560-018-0294-x ↗
2. Lowering the temperature of solid oxide fuel cells[J]10.1126/science.1204090 ↗
3. Influence of pressurisation on SOFC performance and durability: a theoretical study[J]10.1002/fuce.201000098 ↗
4. Optimization of Jet-A fuel reforming for aerospace applications[J]10.1016/j.ijhydene.2005.12.017 ↗
5. Characterization and optimization of an autothermal diesel and jet fuel reformer for 5 kWe mobile fuel cell applications[J]10.1016/j.cej.2009.10.039 ↗
6. Fuel adaptability study of a lab-scale 2.5 kWth autothermal reformer[J]10.1016/j.ijhydene.2015.03.147 ↗
7. Autothermal reforming of commercial Jet A-1 on a 5kWe scale[J]10.1016/j.ijhydene.2007.07.060 ↗
8. Hydrogen production by autothermal reforming of dodecane over strontium titanate based perovskite catalysts[J]10.1016/j.ijhydene.2016.11.127 ↗
9. Hydrogen production via catalytic autothermal reforming of desulfurized Jet-A fuel[J]10.1016/j.ijhydene.2016.11.004 ↗
10. Hybrid solid oxide fuel cells–gas turbine systems for combined heat and power: a review[J]10.1016/j.apenergy.2015.06.027 ↗
11. Analysis of jet fuel reforming for solid oxide fuel cell applications in auxiliary power units[J]10.1016/j.ijhydene.2007.11.012 ↗
12. Thermo-electrochemical and thermal stress analysis for an anode-supported SOFC cell[J]10.1016/j.renene.2008.02.023 ↗
13. Modeling of a SOFC fuelled by methane: from direct internal reforming to gradual internal reforming[J]10.1016/j.ces.2006.11.034 ↗
14. System level exergy assessment of strategies deployed for solid oxide fuel cell stack temperature regulation and thermal gradient reduction[J]10.1021/acs.iecr.8b04142 ↗
15. Controlling reformation rate for a more uniform temperature distribution in an internal methane steam reforming solid oxide fuel cell[J]10.1016/j.jpowsour.2020.228310 ↗
16. Thermal effects of planar high temperature heat pipes in solid oxide cell stacks operated with internal methane reforming[J]10.1016/j.jpowsour.2017.11.007 ↗
17. Modeling of IT-SOFC with indirect internal reforming operation fueled by methane: effect of oxygen adding as autothermal reforming[J]10.1016/j.ijhydene.2010.09.045 ↗
18. Simplified chemical reaction mechanism for surrogate fuel of aviation kerosene and its verification[J]10.1021/acs.energyfuels.6b01852 ↗
19. Thermodynamic analysis of solid oxide fuel cells operated with methanol and ethanol under direct utilization, steam reforming, dry reforming or partial oxidation conditions[J]10.1016/j.jpowsour.2008.10.043 ↗
20. Thermodynamic evaluation of methanol steam reforming for hydrogen production[J]10.1016/j.jpowsour.2006.04.091 ↗
21. Thermoeconomic analysis of SOFC-GT hybrid systems fed by liquid fuels[J]10.1016/j.energy.2009.06.012 ↗
22. Solid oxide fuel cell and advanced combustion engine combined cycle: a pathway to 70% electrical efficiency[J]10.1016/j.apenergy.2018.10.132 ↗
23. Reaction of CO/CO2 gas mixtures on Ni–YSZ cermet electrodes[J]10.1023/A:1003446721350 ↗
24. Effect of operating parameters on a hybrid system of intermediate-temperature solid oxide fuel cell and gas turbine[J]10.1016/j.energy.2015.07.100 ↗
25. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance[J]10.1016/j.jpowsour.2004.06.040 ↗
26. Study on the performance comparison of three configurations of aviation fuel cell gas turbine hybrid power generation system[J]10.1016/j.jpowsour.2021.230007 ↗
27. Modeling and simulation of solid oxide fuel cell based on the volume–resistance characteristic modeling technique[J]10.1016/j.jpowsour.2007.10.051 ↗
28. Crack propagation of planar and corrugated solid oxide fuel cells during cooling process[J]10.1002/er.4369 ↗
29. Anode-supported intermediate-temperature direct internal reforming solid oxide fuel cell: II. Model-based dynamic performance and control[J]10.1016/j.jpowsour.2005.01.017 ↗
30. Kerrebrock · 2012
31. Technical analysis of a hybrid solid oxide fuel cell/gas turbine cycle[J]10.1016/j.enconman.2019.112195 ↗
32. Models for predicting the performance of Brayton-cycle engines[J]10.1115/1.2906831 ↗
33. Exergetic, economic, and environmental evaluations and multi-objective optimization of an internal-reforming SOFC-gas turbine cycle coupled with a Rankine cycle[J]10.1016/j.applthermaleng.2016.07.180 ↗
34. The hybrid solid oxide fuel cell (SOFC) and gas turbine (GT) systems steady state modeling[J]10.1016/j.ijhydene.2012.03.005 ↗
35. Incropera · 2007
36. High efficiency SOFC power cycles with indirect natural gas reforming and CO2 capture[J]10.1115/1.4029425 ↗
37. Analysis of the design of a pressurized SOFC hybrid system using a fixed gas turbine design[J]10.1016/j.jpowsour.2007.03.067 ↗
38. Hydrogen for fuel cells from ethanol by steam-reforming, partial-oxidation and combined auto-thermal reforming: a thermodynamic analysis[J]10.1016/j.jpowsour.2008.08.010 ↗
39. Characterization of kilowatt-scale autothermal reformer for production of hydrogen from heavy hydrocarbons[J]10.1016/j.ijhydene.2003.11.009 ↗
40. A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks[J]10.1016/j.apenergy.2020.115899 ↗
41. Cycle analysis of solid oxide fuel cell-gas turbine hybrid systems integrated ethanol steam reformer: energy management[J]10.1016/j.energy.2017.03.105 ↗
42. Autothermal steam reforming of higher hydrocarbons: n-decane, n-hexadecane, and JP-8[J]10.1016/j.apcata.2006.03.039 ↗
43. Numerical analysis of a planar anode-supported SOFC with composite electrodes[J]10.1016/j.ijhydene.2009.02.016 ↗