A metallic gas diffusion layer and porous media flow field for proton exchange membrane fuel cells
Source abstract
Abstract
Recently, metal foams have been intensively studied to be used as alternative flow fields to the conventional channel-rib flow field in proton exchange membrane fuel cells (PEMFC) to enhance the uniformity of gas distribution and reduce the weight of fuel cells. This work demonstrates a simple and compact design at the cathode side for achieving effective electrons and gas transport in PEMFCs, which includes a porous metal foam flow media coated with a microporous layer (MPL) on its top to form one single hierarchical porous component functioning as both the gas distributor and diffusion media. With this low-cost and light-weight design, the conventional gas diffusion layer (GDL) can be eliminated. A comparative analysis of PEM fuel cell performances for the conventional carbon paper-based GDL and three metallic GDL designs containing different MPLs is conducted under varied stoichiometric ratios and relative humidity (RH). At 100% RH, the optimum performance is achieved on the CB/CNT MPL-coated metal foam, with the maximum power density increased by 21% than that of the conventional design when the stoichiometric ratio of air is 1.5. Under dry conditions (40% RH), all the metallic GDL structured cells outperform the conventional one at a low airflow rate (stoichiometric ratio = 1.5).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Approaches to polymer electrolyte membrane fuel cells (PEMFCs) and their cost10.1016/j.rser.2015.07.157 ↗
2. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
3. A review of polymer electrolyte membrane fuel cell durability test protocols10.1016/j.jpowsour.2011.07.082 ↗
4. A comprehensive study of the effect of bipolar plate (BP) geometry design on the performance of proton exchange membrane (PEM) fuel cells10.1016/j.rser.2019.04.081 ↗
5. Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell10.1016/j.ijhydene.2019.07.231 ↗
6. Optimization design of the cathode flow channel for proton exchange membrane fuel cells10.1016/j.enconman.2018.06.111 ↗
7. Review of bipolar plates in PEM fuel cells: flow-field designs10.1016/j.ijhydene.2004.09.019 ↗
8. Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments10.1016/j.enconman.2018.08.070 ↗
9. Flow field bipolar plates in a proton exchange membrane fuel cell: analysis & modeling10.1016/j.enconman.2016.10.053 ↗
10. Water transport in polymer electrolyte membrane fuel cells10.1016/j.pecs.2010.06.002 ↗
11. Data-based flooding fault diagnosis of proton exchange membrane fuel cell systems using LSTM networks10.1016/j.egyai.2021.100056 ↗
12. Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review10.1016/j.ijhydene.2012.07.076 ↗
13. Application of porous materials for the flow field in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2021.229664 ↗
14. Porous metal materials for polymer electrolyte membrane fuel cells - a review10.1016/j.apenergy.2012.01.073 ↗
15. Numerical study of porous flow field designs for proton exchange membrane fuel cells
16. Liquid droplet detachment and dispersion in metal foam flow field of polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2020.229150 ↗
17. A PEM fuel cell with metal foam as flow distributor10.1016/j.enconman.2012.03.018 ↗
18. Experimental performance investigation on the arrangement of metal foam as flow distributors in proton exchange membrane fuel cell10.1016/j.enconman.2021.113846 ↗
19. Experimental performance assessment of metal-foam flow fields for proton exchange membrane fuel cells10.1016/j.apenergy.2019.113458 ↗
20. X-ray tomography and modelling study on the mechanical behaviour and performance of metal foam flow-fields for polymer electrolyte fuel cells10.1016/j.ijhydene.2019.01.206 ↗
21. Performance of a metallic gas diffusion layer for PEM fuel cells10.1016/j.jpowsour.2007.10.055 ↗
22. Titanium sinter as gas diffusion backing in PEMFC10.1016/S0378-7753(03)00087-9 ↗
23. Next-generation polymer-electrolyte-membrane fuel cells using titanium foam as gas diffusion layer10.1021/am500962h ↗
24. Corrugated mesh flow channel and novel microporous layers for reducing flooding and resistance in gas diffusion layer-less polymer electrolyte fuel cells10.1016/j.jpowsour.2014.04.159 ↗
25. Gas diffusion layer/flow-field unified membrane-electrode assembly in fuel cell using graphene foam10.1016/j.electacta.2019.134808 ↗
26. Graphene and reduced graphene oxide based microporous layers for high- performance proton-exchange membrane fuel cells under varied humidity operation10.1016/j.jpowsour.2019.03.048 ↗
27. Diffusion layer parameters influencing optimal fuel cell performance10.1016/S0378-7753(99)00489-9 ↗
28. Application of metal foam as a flow field for PEM fuel cell stack10.1002/fuce.201700180 ↗
29. Enhanced performance of proton exchange membrane fuel cell by introducing nitrogen-doped CNTs in both catalyst layer and gas diffusion layer10.1016/j.electacta.2017.08.160 ↗
30. Capillary pressure and hydrophilic porosity in gas diffusion layers for polymer electrolyte fuel cells10.1016/j.jpowsour.2005.05.086 ↗
31. Analysis of polarization curves to evaluate polarization sources in hydrogen/air PEM fuel cells10.1149/1.1860034 ↗
32. Low temperature durability and consistency analysis of proton exchange membrane fuel cell stack based on comprehensive characterizations10.1016/j.apenergy.2020.114626 ↗
33. Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells10.1016/S0378-7753(03)00023-5 ↗
34. Molybdenum carbide coatings on 316L stainless steel for bipolar plates of PEM fuel cells10.1016/j.ijhydene.2018.12.184 ↗
35. Enhancement of proton exchange membrane fuel cell performance by doping microporous layers of gas diffusion layers with multiwall carbon nanotubes10.1016/j.jpowsour.2012.07.078 ↗
36. The synergy between multi-wall carbon nanotubes and Vulcan XC72R in microporous layers10.1016/j.ijhydene.2009.08.092 ↗
37. Effect of operational parameters on the performance of PEMFC assembled with Au-coated Ni-foam10.1016/j.ijhydene.2012.02.142 ↗