journal article·2022-09

Tuning of water distribution in the membrane electrode assembly of anion exchange membrane fuel cells using functionalized carbon additives

Jonghyun Hyun, Wonhee Jo, Seok Hwan Yang, Sang-Hun Shin, Gisu Doo, Sungyu Choi, Dong-Hyun Lee, Dong Wook Lee, Euntaek Oh, Jang Yong Lee, Hee-Tak Kim

Publisher page

Abstract

Water management of membrane electrode assemblies (MEAs) has a significant impact on both the power performance and durability of anion exchange membrane fuel cells (AEMFCs). In this work, the hydrophobicity of catalyst layers (CLs) was systematically tuned using hydroxyl-functionalized and fluoroalkyl-functionalized carbon additives to improve water management. The inclusion of the fluorinated carbon in the anode CL effectively suppresses anode water flooding, whereas the hydroxyl-functionalized carbon additive in the cathode prevents cathode drying. The pairing of the hydrophobic anode CL and the hydrophilic cathode CL increases the maximum current density by 1.7 times compared with the carbon-additive-free MEA and ensures stable constant current operation for more than 1000 h due to the mitigation of water imbalance between the cathode and anode. This work highlights the importance of water management and provides simple and diversified means to tune the water distribution of an AEMFC.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Activity targets for nanostructured platinum-group-metal-free catalysts in hydroxide exchange membrane fuel cells10.1038/nnano.2016.265 ↗
2. Highly conductive anion-exchange membranes based on cross-linked poly (norbornene): vinyl addition polymerization10.1021/acsaem.8b02051 ↗
3. High performance anion exchange membrane fuel cells enabled by fluoropoly (olefin) membranes10.1002/adfm.201902059 ↗
4. Cationic side-chain attachment to poly (phenylene oxide) backbones for chemically stable and conductive anion exchange membranes10.1021/acs.chemmater.7b01494 ↗
5. Rational design of polyaromatic ionomers for alkaline membrane fuel cells with > 1 W cm-2 power density10.1039/C8EE02192A ↗
6. Constructing ionic highway in alkaline polymer electrolytes10.1039/C3EE43275K ↗
7. Non-fluorinated pre-irradiation-grafted (peroxidated) LDPE-based anion-exchange membranes with high performance and stability10.1039/C7EE02053H ↗
8. Radiation-grafted anion-exchange membranes: the switch from low-to high-density polyethylene leads to remarkably enhanced fuel cell performance10.1039/C9EE00331B ↗
9. Olefin metathesis-crosslinked, bulky imidazolium-based anion exchange membranes with excellent base stability and mechanical properties10.1016/j.memsci.2019.117793 ↗
10. Highly stable membrane–electrode assembly using ether-linkage-free spirobifluorene-based aromatic polyelectrolytes for direct formate solid alkaline fuel cells10.1016/j.jpowsour.2019.226997 ↗
11. A high-temperature anion-exchange membrane fuel cell10.1016/j.powera.2020.100023 ↗
12. Ionic highways from covalent assembly in highly conducting and stable Anion exchange membrane fuel cells10.1021/jacs.9b08749 ↗
13. Composite poly (norbornene) anion conducting membranes for achieving durability, water management and high power (3.4 W/cm2) in hydrogen/oxygen alkaline fuel cells10.1149/2.1301910jes ↗
14. Poly (bis-arylimidazoliums) possessing high hydroxide ion exchange capacity and high alkaline stability10.1038/s41467-019-10292-z ↗
15. Poly (aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells10.1038/s41560-019-0372-8 ↗
16. Beyond catalysis and membranes: visualizing and solving the challenge of electrode water accumulation and flooding in AEMFCs10.1039/C8EE00122G ↗
18. Predicting performance stability of anion exchange membrane fuel cells10.1016/j.jpowsour.2019.02.069 ↗
19. Steady state and transient simulation of anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.012 ↗
20. Degradation study for the membrane electrode assembly of anion exchange membrane fuel cells at a single-cell level10.1039/D1TA05801K ↗
21. The importance of water transport in high conductivity and high-power alkaline fuel cells
22. Asymmetric electrode ionomer for low relative humidity operation of anion exchange membrane fuel cells10.1039/D0TA05807F ↗
23. Alkaline polymer electrolyte fuel cells without anode humidification and H2 emission10.1016/j.jpowsour.2020.228471 ↗
24. Using operando techniques to understand and design high performance and stable alkaline membrane fuel cells10.1038/s41467-020-17370-7 ↗
25. Strategic design for promoting water behavior via ensemble of thermo-responsive polymer functionalized catalysts and reservoir carbon in anion exchange membrane fuel cells10.1016/j.jpowsour.2021.229738 ↗
26. Effect of chemically modified Vulcan XC-72R on the performance of air-breathing cathode in a single-chamber microbial fuel cell10.1016/j.biortech.2010.01.120 ↗
27. Poly (carbazole)-based anion-conducting materials with high performance and durability for energy conversion devices10.1039/D0EE01842B ↗
28. Tailoring catalyst layer structures for anion exchange membrane fuel cells by controlling the size of ionomer aggreates in dispersion10.1016/j.cej.2021.131737 ↗
29. Distribution of fluoroalkylsilanes in hydrophobic hybrid sol–gel coatings obtained by co-condensation10.1039/C8TA10191D ↗
30. Selective modification of aligned carbon nanotubes by N2 plasma and their diode behavior10.1039/C8RA01396A ↗
31. Photomask-free, direct selective electroless deposition on glass by controlling surface hydrophilicity10.1021/acsomega.9b00259 ↗
32. Synthesis of highly dispersed Pt nanoparticles into carbon supports by fluidized bed reactor atomic layer deposition to boost PEMFC performance10.1038/s41427-020-0223-x ↗
33. Effect of water on the stability of quaternary ammonium groups for anion exchange membrane fuel cell applications10.1021/acs.chemmater.7b00958 ↗
34. Alkaline stability of quaternized Diels–Alder polyphenylenes10.1021/acs.macromol.9b00853 ↗
35. Alkaline polymer electrolyte fuel cells stably working at 80 °C10.1016/j.jpowsour.2018.04.047 ↗
36. Achieving high‐performance and 2000 h stability in anion exchange membrane fuel cells by manipulating ionomer properties and electrode optimization10.1002/aenm.202001986 ↗
37. Poly (Alkyl‐Terphenyl piperidinium) ionomers and membranes with an outstanding alkaline‐membrane fuel‐cell performance of 2.58 W cm-210.1002/ange.202013395 ↗
38. Poly (fluorenyl aryl piperidinium) membranes and ionomers for anion exchange membrane fuel cells
39. Ionomer cross-linking immobilization of catalyst nanoparticles for high performance alkaline membrane fuel cells10.1021/acs.chemmater.9b00999 ↗
40. Electrochemical derivatization of carbon surface by reduction of in situ generated diazonium cations10.1021/jp054513+ ↗
41. First insight into fluorinated Pt/carbon aerogels as more corrosion-resistant electrocatalysts for proton exchange membrane fuel cell cathodes10.1007/s12678-015-0267-9 ↗