journal article·2022-09

Modulating Na vacancies of Na4FeV(PO4)3 via Zr-substitution: Toward a superior rate and ultrastable cathode for sodium-ion batteries

Xudong Ma, Xiao Yu, Xianwei Li, Qi Liu, Yong Liu

Publisher page

Abstract

The Na Super Ionic Conductor (NASICON)-type Na 3V 2(PO 4) 3 has aroused enormous attentions as the cathode material for sodium-ion batteries. However, the scarcity of vanadium resources and toxicity of vanadium complexes limit its large-scale application. Herein, we use a reductive acid assisted sol-gel method to replace half of V 3+ in Na 3V 2(PO 4) 3 with Fe 2+ for synthesizing a NASICON-structure Na 4FeV(PO 4) 3/C, and substitute V 3+ in Na 4FeV(PO 4) 3 by small amount of Zr 4+ for fabricating a series of Na 4-xFeV 1-xZr x (PO 4) 3/C (x = 0.1 and 0.2) materials. The substitution of V 3+ by Fe 2+ shows reduced cost, low toxicity, and increased Na + concentration in per formula unit; while the substitution of V 3+ by Zr 4+ indicates expanded unit cell volume and abundant Na vacancies, which facilitate Na + mobility and inherent electronic conductivity. Consequently, Na 3.9FeV 0.9Zr 0.1(PO 4) 3/C electrode exhibits high discharge capacity (114 mAh g −1 at 0.1C), superior rate capability (66.7 mAh g −1 at 40C), and remarkable cyclic stability (capacity retention of 82.4% after 4000 cycles at 20C). The kinetic analyses and ex-situ characterizations confirm that small volume change (5.21%) and highly reversible redox reaction (Fe 2+/3+ and V 3+/4+) occur during the electrochemical process.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Electrochemical energy storage in a sustainable modern society10.1039/C3EE42613K ↗
2. Progress on iron oxides and chalcogenides as anodes for sodium-ion batteries10.1016/j.cej.2019.122261 ↗
3. Ten years left to redesign lithium-ion batteries reserves of rare metals used in electric-vehicle cells are dwindling, so boost research on iron and silicon alternatives, urge kostiantyn turcheniuk and colleagues10.1038/d41586-018-05752-3 ↗
4. Fundamentals, status and promise of sodium-based batteries10.1038/s41578-021-00324-w ↗
5. A novel Fe-defect induced pure-phase Na4Fe2.91(PO4)2P2O7 cathode material with high capacity and ultra-long lifetime for low-cost sodium-ion batteries10.1016/j.nanoen.2021.106680 ↗
6. Progress in high-voltage cathode materials for rechargeable sodium-ion batteries10.1002/aenm.201701785 ↗
7. The advent of manganese-substituted sodium vanadium phosphate-based cathodes for sodium-ion batteries and their current progress: a focused review10.1039/D1TA09040B ↗
8. Atomic-scale investigation of Na3V2(PO4)3 formation process in chemical infiltration via in situ transmission electron microscope for solid-state sodium batteries10.1016/j.nanoen.2021.106144 ↗
9. A dynamic polyanion framework with anion/cation co-doping for robust Na/Zn-ion batteries
10. Understanding crystal structures, ion diffusion mechanisms and sodium storage behaviors of NASICON material10.1016/j.ensm.2020.09.007 ↗
11. Superior Na-ion storage achieved by Ti substitution in Na3V2(PO4)310.1016/j.ensm.2018.03.021 ↗
12. High capacity and high-rate NASICON-Na3.75V1.25Mn0.75(PO4)3 cathode for Na-ion batteries via modulating electronic and crystal structures10.1002/aenm.201902918 ↗
13. Superior Na-ion storage achieved by Ti substitution in Na3V2(PO4)310.1016/j.ensm.2018.03.021 ↗
14. Simultaneous modified Na2.9V1.9Zr0.1(PO4)3/C@rGO as a superior high rate and ultralong lifespan cathode for symmetric sodium ion batteries10.1016/j.cej.2020.127451 ↗
15. High valence Mo-doped Na3V2(PO4)3/C as a high rate and stable cycle-life cathode for sodium battery10.1039/C7TA08970H ↗
16. Understanding the electrochemical mechanisms induced by gradient Mg2+ distribution of Na-rich Na3+xV2-xMgx(PO4)3/C for sodium ion batteries10.1021/acs.chemmater.7b03903 ↗
17. Optimizing the Mg doping concentration of Na3V2-xMgx(PO4)2F3/C for enhanced sodiation/desodiation properties10.1021/acssuschemeng.1c00418 ↗
18. Mn-substituted tunnel-type polyantimonic acid confined in a multidimensional integrated architecture enabling superfast-charging lithium-ion battery anodes
19. Fast sodium intercalation in Na3.41£0.59FeV(PO4)3: a novel sodium-deficient NASICON cathode for sodium-ion batteries10.1016/j.ensm.2020.11.010 ↗
20. Crystal structures and local environments of NASICON-type Na3FeV(PO4)3 and Na4FeV(PO4)3 positive electrode materials for NaIon batteries10.1021/acs.chemmater.1c01457 ↗
21. Na3V2(PO4)3: an advanced cathode for sodium-ion batteries10.1039/C8NR09391A ↗
22. Engineering of polyanion type cathode materials for sodium-ion batteries: toward higher energy/power density
23. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
24. Vesta 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
25. Toward a high-energy-density cathode with enhanced temperature adaptability for sodium-ion batteries: a case study of Na3MnZr(PO4)3 microspheres with embedded dual-carbon networks10.1021/acsami.1c03642 ↗
26. Remarkable enhancement in the electrochemical activity of maricite NaFePO4 on high-surface-area carbon cloth for sodium-ion batteries10.1016/j.carbon.2019.02.004 ↗
27. Impact of Mg2+ and Al3+ substitutions on the structural and electrochemical properties of NASICON-NaxVMn0.75M0.25(PO4)3 (M = Mg and Al) cathodes for sodium-ion batteries10.1002/smll.202003973 ↗
28. Elucidating the impact of Mg substitution on the properties of NASICON-Na3+yV2-yMgy(PO4)3 cathodes10.1002/adfm.202105463 ↗
29. Construction and operating mechanism of high-rate Mo-doped Na3V2(PO4)3@C nanowires toward practicable wide-temperature-tolerance Na-ion and hybrid Li/Na-ion batteries
30. Atomic structure and kinetics of NASICON NaxV2(PO4)3 cathode for sodium-ion batteries10.1002/adfm.201400173 ↗
31. Multidimensional Na4VMn0.9Cu0.1(PO4)3/C cotton-candy cathode materials for high energy Na-ion batteries10.1039/D0TA03767B ↗
32. A novel NASICON-typed Na4VMn0.5Fe0.5(PO4)3 cathode for high-performance Na-ion batteries10.1002/aenm.202100729 ↗
33. An air-stable iron/manganese-based phosphate cathode for high performance sodium-ion batteries
34. Insights into the enhanced sodium storage property and kinetics based on the Zr/Si codoped Na3V2(PO4)3/C cathode with superior rate capability and long lifespan10.1016/j.jpowsour.2020.228632 ↗
35. Iron-based NASICON-type Na4Fe3(PO4)2(P2O7) cathode for zinc-ion battery: Zn2+/Na+ co-intercalation enabling high capacity10.1002/cssc.202101852 ↗
36. Insight into preparation of Fe-doped Na3V2(PO4)3@C from aspects of particle morphology design, crystal structure modulation, and carbon graphitization regulation10.1021/acsami.8b21257 ↗
37. Dual carbon decorated Na3MnTi(PO4)3: a high-energy-density cathode material for sodium-ion batteries10.1016/j.nanoen.2020.104548 ↗
38. Na4Fe3(PO4)2(P2O7)@NaFePO4@C core-double-shell architectures on carbon cloth: a high-rate, ultrastable, and flexible cathode for sodium ion batteries10.1016/j.cej.2019.01.173 ↗
39. Three electron reversible redox reaction in sodium vanadium chromium phosphate as a high-energy-density cathode for sodium-ion batteries
40. Polyanion-type cathode materials for sodium-ion batteries10.1039/C9CS00846B ↗
41. Higher energy and safer sodium ion batteries via an electrochemically made disordered Na3V2(PO4)2F3 material10.1038/s41467-019-08359-y ↗
42. Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors10.1038/nmat2612 ↗
43. Understanding and calibration of charge storage mechanism in cyclic voltammetry curves10.1002/anie.202104167 ↗
44. Understanding the superior sodium-ion storage in a novel Na3.5Mn0.5V1.5(PO4)3 cathode10.1016/j.ensm.2019.05.041 ↗
45. Superior electrochemical performance and storage mechanism of Na3V2(PO4)3 cathode for room-temperature sodium-ion batteries10.1002/aenm.201200558 ↗
46. A NASICON-type positive electrode for Na batteries with high energy density: Na4MnV(PO4)310.1002/smtd.201800218 ↗
47. Enhancing Na+ extraction limit through high voltage activation of the NASICON-type Na4MnV(PO4)3 cathode10.1021/acsaem.8b01269 ↗
48. 3DBVS mapper: a program for automatically generating bond-valence sum landscapes10.1107/S0021889812032906 ↗
49. Adams · 2014 · 91
50. Prelithiation/presodiation techniques for advanced electrochemical energy storage systems: concepts, applications, and perspectives10.1002/adfm.202005581 ↗
51. Recent advances on pre-sodiation in sodium-ion capacitors: a mini review10.1016/j.elecom.2021.107090 ↗