journal article·2022-02

Facilitating Mg2+ diffusion in high potential LixV2(PO4)3 cathode material with a co-insertion strategy for rechargeable Mg-ion batteries

Cuicui Li, Wanlong Wu, Yaozhi Liu, Xianpeng Yang, Zengming Qin, Zhongqiu Jia, Xiaoqi Sun

Publisher page

Abstract

Abstract Rechargeable Mg-ion batteries offer high energy density and good safety. However, the lack of cathode materials with high operating potential and considerable capacity is a great challenge for their practical applications. This is limited by the sluggish diffusion of multivalent Mg2+ cations in solid lattices. Here, we propose a co-insertion strategy to facilitate cation diffusions and present a polyanion cathode of Li3V2(PO4)3 to provide high redox potential. The initial charge of the material is associated with the extraction of two Li+ cations, which are co-inserted with Mg2+ from the 0.5 m Mg(ClO4)2/PC electrolyte during the following electrochemical processes. The cation diffusion coefficients are largely enhanced in comparison to the electrode without Li+ co-insertion, and higher capacity is obtained. At room temperature, the Li3V2(PO4)3 electrode delivers 124 mAh g−1 capacity at 100 mA g−1 with discharge plateaus at 0.46 V and −0.44 V vs. Ag/Ag+. A capacity retention of 80% is realized after 300 cycles at 500 mA g−1. A rocking-chair Mg-ion full cell coupling the Li3V2(PO4)3 cathode with an anthraquinone anode achieves 41 mAh g−1 capacity (based on the mass of both electrodes). The work demonstrates a promising pathway for the design of high performance cathode materials for Mg-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
2. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
3. Ammonium-ion storage using electrodeposited manganese oxides10.1002/anie.202013110 ↗
4. Synergistic interface-assisted electrode–electrolyte coupling toward advanced charge storage10.1002/adma.202005344 ↗
5. Boosting energy storage via confining soluble redox species onto solid–liquid interface10.1002/aenm.202003599 ↗
6. Present and future perspective on electrode materials for rechargeable zinc-ion batteries10.1021/acsenergylett.8b01552 ↗
7. An overview and future perspectives of rechargeable zinc batteries10.1002/smll.202000730 ↗
8. How comparable are sodium-ion batteries to lithium-ion counterparts?10.1021/acsenergylett.0c02181 ↗
9. Investigation of the mechanism of Mg insertion in birnessite in nonaqueous and aqueous rechargeable Mg-ion batteries10.1021/acs.chemmater.5b03983 ↗
10. NaV1.25Ti0.75O4: a potential post-spinel cathode material for Mg batteries10.1021/acs.chemmater.7b03383 ↗
11. Cu2MoS4 hollow nanocages with fast and stable Mg2+-storage performance10.1016/j.cej.2020.124125 ↗
12. Polyanthraquinone-based organic cathode for high-performance rechargeable magnesium-ion batteries10.1002/aenm.201600140 ↗
13. Direct observation of MgO formation at cathode electrolyte interface of a spinel MgCo2O4 cathode upon electrochemical Mg removal and insertion10.1016/j.jpowsour.2019.03.102 ↗
14. A critical review of cathodes for rechargeable Mg batteries10.1039/C8CS00319J ↗
15. Reversible S0/MgSx redox chemistry in a MgTFSI2/MgCl2/DME electrolyte for rechargeable Mg/S batteries10.1002/anie.201708241 ↗
16. Water activated VOPO4 for magnesium ion batteries10.1021/acs.nanolett.8b02854 ↗
17. Reversible Mg-ion insertion in a metastable one-dimensional polymorph of V2O5
18. Spinel compounds as multivalent battery cathodes: a systematic evaluation based on ab initio calculations10.1039/C4EE03389B ↗
19. Evaluation of sulfur spinel compounds for multivalent battery cathode applications10.1039/C6EE01731B ↗
20. Prototype systems for rechargeable magnesium batteries10.1038/35037553 ↗
21. A high capacity thiospinel cathode for Mg batteries10.1039/C6EE00724D ↗
22. Layered TiS2 positive electrode for Mg batteries10.1021/acsenergylett.6b00145 ↗
23. MOF derived TiO2 with reversible magnesium pseudocapacitance for ultralong-life Mg metal batteries10.1016/j.cej.2021.128491 ↗
24. Flower-like CoS with nanostructures as a new cathode-active material for rechargeable magnesium batteries10.1016/j.jpowsour.2015.06.127 ↗
25. Disulfide-bridged (Mo3S11) cluster polymer: molecular dynamics and application as electrode material for a rechargeable magnesium battery10.1021/acs.nanolett.6b02593 ↗
26. Structural evolution of reversible Mg insertion into a bilayer structure of V2O5·nH2O xerogel10.1021/acs.chemmater.6b00026 ↗
27. High-capacity nanostructured manganese dioxide cathode for rechargeable magnesium ion batteries10.1016/j.jpowsour.2014.07.162 ↗
28. The challenge of developing rechargeable magnesium batteries10.1557/mrs.2014.61 ↗
29. Polyanionic (phosphates, silicates, sulfates) frameworks as electrode materials for rechargeable Li (or Na) batteries10.1021/cr3001862 ↗
30. Hybrid aqueous battery based on Na3V2(PO4)3/C cathode and zinc anode for potential large-scale energy storage10.1016/j.jpowsour.2016.01.058 ↗
31. High-energy aqueous magnesium hybrid full batteries enabled by carrier-hosting potential compensation10.1002/ange.202013315 ↗
32. A high-voltage rechargeable magnesium-sodium hybrid battery10.1016/j.nanoen.2017.02.012 ↗
33. Fast Mg2+ diffusion in Mo3(PO4)3O for Mg batteries10.1039/C7CC02903A ↗
34. Effect of structure on the Fe3+/Fe2+Redox couple in iron phosphates10.1149/1.1837649 ↗
35. Binder-free Li3V2(PO4)3/C membrane electrode supported on 3D nitrogen-doped carbon fibers for high-performance lithium-ion batteries10.1016/j.nanoen.2017.02.026 ↗
36. Cu3(PO4)2/C composite as a high-capacity cathode material for rechargeable Na-ion batteries10.1016/j.nanoen.2016.07.011 ↗
37. Nanocrystalline MgMnSiO4 and MgCoSiO4 particles for rechargeable Mg-ion batteries10.1016/j.jpowsour.2017.06.084 ↗
38. Vanadium phosphate as a promising high-voltage magnesium ion (de)-intercalation cathode host10.1039/C4RA14416C ↗
39. A promising high voltage cathode material basedon mesoporous Na3V2(PO4)3/C for rechargeable magnesium batteries10.1002/chem.201704303 ↗
40. Exploring the high-voltage Mg2+/Na+ co-intercalation reaction of Na3VCr(PO4)3 in Mg-ion batteries10.1039/C9TA05608D ↗
41. Fast kinetics of Mg2+/Li+ hybrid ions in a polyanion Li3V2(PO4)3 cathode in a wide temperature range10.1039/C9TA00502A ↗
42. A concept of dual-salt polyvalent-metal storage battery10.1039/C3TA13668J ↗
43. High-capacity Mg–organic batteries based on nanostructured rhodizonate salts activated by Mg–Li dual-salt electrolyte10.1021/acsnano.7b09177 ↗
44. Electrospun V2MoO8 as a cathode material for rechargeable batteries with Mg metal anode10.1016/j.nanoen.2017.02.014 ↗
45. Improving the electrochemical performance of the Li4Ti5O12 electrode in a rechargeable magnesium battery by lithium-magnesium co-intercalation10.1002/anie.201501005 ↗
46. The high performance of crystal water containing manganese birnessite cathodes for magnesium batteries10.1021/acs.nanolett.5b01109 ↗
47. Aqueous vs. nonaqueous Zn-ion batteries: consequences of the desolvation penalty at the interface10.1039/C8EE00378E ↗
48. How water accelerates bivalent ion diffusion at the electrolyte/electrode interface10.1002/anie.201806748 ↗
49. Investigation of the water-stimulated Mg2+ insertion mechanism in an electrodeposited MnO2 cathode using X-ray photoelectron spectroscopy10.1039/C7CP06312A ↗
50. H2V3O8 nanowires as high-capacity cathode materials for magnesium-based battery10.1021/acsami.7b09924 ↗
51. Unraveling the magnesium-ion intercalation mechanism in vanadium pentoxide in a wet organic electrolyte by structural determination10.1021/acs.inorgchem.7b00204 ↗
52. Ammonium vanadium bronze (NH4V4O10) as a high-capacity cathode material for nonaqueous magnesium-ion batteries10.1021/acs.chemmater.8b00462 ↗
53. Electrolyte solutions for rechargeable magnesium batteries based on organomagnesium chloroaluminate complexes10.1149/1.1429925 ↗
54. Electrochemically stable cathode current collectors for rechargeable magnesium batteries10.1039/C3TA15113A ↗
55. Synthesis and characterization of advanced Li3V2(PO4)3 nanocrystals@conducting polymer PEDOT for high energy lithium-ion batteries10.1016/j.apsusc.2016.09.156 ↗
56. Li3V2(PO4)3@C core-shell nanocomposite as a superior cathode material for lithium-ion batteries10.1039/c3nr01617j ↗
57. Fast and stable Mg2+ intercalation in a high voltage NaV2O2(PO4)2F/rGO cathode material for magnesium-ion batteries10.1007/s40843-020-1311-1 ↗
58. Multidimensional synergistic nanoarchitecture exhibiting highly stable and ultrafast sodium-ion storage10.1002/adma.201707122 ↗
59. Electrochemical property: structure relationships in monoclinic Li3-yV2(PO4)310.1021/ja034565h ↗
60. Nanostructure composites: a high capacity, fast rate Li3V2(PO4)3/carbon cathode for rechargeable lithium batteries10.1002/1521-4095(20021104)14:21<1525::AID-ADMA1525>3.0.CO;2-3 ↗
61. Interlayer-spacing-regulated VOPO4 nanosheets with fast kinetics for high-capacity and durable rechargeable magnesium batteries10.1002/adma.201801984 ↗
62. MgFePO4F as a feasible cathode material for magnesium batteries10.1039/C4TA01779J ↗
63. Magnesium cobalt silicate materials for reversible magnesium ion storage10.1016/j.electacta.2012.01.037 ↗
64. MgFeSiO4 prepared via a molten salt method as a new cathode material for rechargeable magnesium batteries10.1007/s11434-010-4247-4 ↗
65. Atomic substitution enabled synthesis of vacancy-rich two-dimensional black TiO2-x nanoflakes for high-performance rechargeable magnesium batteries10.1021/acsnano.8b06917 ↗
66. VO2 nanoflakes as the cathode material of hybrid magnesium-lithium-ion batteries with high energy density10.1021/acsami.7b02480 ↗
67. Rechargeable Mg batteries with graphene-like MoS2 cathode and ultrasmall Mg nanoparticle anode10.1002/adma.201003560 ↗
68. The effect of milling on the performance of a Mo6S8 Chevrel phase as a cathode material for rechargeable Mg batteries10.1007/s10008-004-0633-7 ↗
69. Rechargeable Mg-ion batteries based on WSe2 nanowire cathodes10.1021/nn4032454 ↗
70. xLi3V2(PO4)3·LiVPO4F/C composite cathode materials for lithium ion batteries10.1016/j.electacta.2012.09.014 ↗
71. Is alpha-V2O5 a cathode material for Mg insertion batteries?10.1016/j.jpowsour.2016.05.028 ↗
72. Effect of water in a non-aqueous electrolyte on electrochemical Mg2+ insertion into WO310.1016/j.jpowsour.2020.229015 ↗
73. Role of structural H2O in intercalation electrodes: the case of Mg in nanocrystalline xerogel-V2O510.1021/acs.nanolett.5b05273 ↗
74. Hydrated MgxV5O12 cathode with improved Mg2+ storage performance10.1002/aenm.202002128 ↗
75. The energy storage behavior of a phosphate-based cathode material in rechargeable zinc batteries10.1039/D1CC00584G ↗
76. Quinone based materials as renewable high energy density cathode materials for rechargeable magnesium batteries10.3390/ma13030506 ↗