journal article·2021-11

Design and validation of a battery management system for solar-assisted electric vehicles

Hongqian Wei, Yan Zhong, Likang Fan, Qiang Ai, Wenqiang Zhao, Rui Jing, Youtong Zhang

Publisher page

Abstract

Expanding the travel mileage of power batteries is of great significance for electric vehicles (EVs). The solar battery pack is considered as a promising supplement to the battery management system (BMS) of EVs but integrating solar power into EVs remains a challenge. This paper proposes a BMS that coordinates the solar panels and the lithium battery system. The proposed BMS mainly involves three aspects. Firstly, an equivalent second-order resistance-capacitance model is established and afterwards is identified by using an improved recursive least squares algorithm. Then, the maximum power prediction strategy is developed based on the advanced state of charge (SOC) algorithm and the available solar energy estimation algorithm. Thirdly, a multi-stage constant current charging strategy based on the adaptive genetic algorithm is designed to optimize the battery temperature rise and charging time simultaneously. The proposed BMS is validated by the experiment on a real-world solar-assisted EV. The results indicate that the proposed power prediction strategy can accurately estimate the available power for EVs. Compared with the widely-used charging method, the developed optimal charging strategy reduces the charging time and temperature rise by 7%–11% and 36%–45%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Electric Vehicles and Infrastructure · Electric and Hybrid Vehicle Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Design of an integrated energy management strategy for a plug-in hybrid electric bus10.1016/j.jpowsour.2019.227391 ↗
2. Comparative study of energy management strategies for hybrid proton exchange membrane fuel cell four wheel drive electric vehicle10.1016/j.jpowsour.2020.228167 ↗
3. Deep reinforcement learning based direct torque control strategy for distributed drive electric vehicles considering active safety and energy saving performance
4. Design validation and analysis of the drive range enhancement and battery bank deration in electric vehicle integrated with split power solar source10.1016/j.energy.2019.01.116 ↗
5. Utilizing solar and wind energy in plug-in hybrid electric vehicles10.1016/j.enconman.2017.11.015 ↗
6. Environmental temperature effects on the energy flow of plug-in hybrid electric vehicles10.1016/j.jpowsour.2021.230231 ↗
7. Estimation and prediction of state of health of electric vehicle batteries using discrete incremental capacity analysis based on real driving data10.1016/j.energy.2021.120160 ↗
8. A data-driven adaptive state of charge and power capability joint estimator of lithium-ion polymer battery used in electric vehicles10.1016/j.energy.2013.10.027 ↗
9. Modelling and experimental validation of an EV torque distribution strategy towards active safety and energy efficiency
10. A safety performance estimation model of lithium-ion batteries for electric vehicles under dynamic compression10.1016/j.energy.2020.119050 ↗
11. State-of-charge and capacity estimation of lithium-ion battery using a new open-circuit voltage versus state-of-charge10.1016/j.jpowsour.2008.08.103 ↗
12. Effects of structure parameters on thermal performance of ternary lithium ion battery under fast charging conditions10.1021/acs.energyfuels.0c00827 ↗
13. An overview and comparison of online implementable SOC estimation methods for lithium-ion battery10.1109/TIA.2017.2775179 ↗
14. An adaptive sliding mode observer for lithium-ion battery state of charge and state of health estimation in electric vehicles10.1016/j.conengprac.2016.05.014 ↗
15. lithium-ion battery state of charge estimation with model parameters adaptation using H∞ extended Kalman filter10.1016/j.conengprac.2018.09.010 ↗
16. Sigma-point Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 2: simultaneous state and parameter estimation10.1016/j.jpowsour.2006.06.004 ↗
17. State of charge estimation by multi-innovation unscented Kalman filter for vehicular applications10.1016/j.est.2020.101978 ↗
18. An adaptive state of charge estimation approach for lithium-ion series-connected battery system10.1016/j.jpowsour.2018.04.101 ↗
19. State-of-charge and state-of-health lithium-Ion batteries' diagnosis according to surface temperature variation10.1109/TIE.2015.2509916 ↗
20. High-performance battery-pack power estimation using a dynamic cell model10.1109/TVT.2004.832408 ↗
21. Model-based state of charge and peak power capability joint estimation of lithium-ion battery in plug-in hybrid electric vehicles10.1016/j.jpowsour.2012.12.003 ↗
22. Butler-Volmer equation-based model and its implementation on state of power prediction of high-power lithium titanate batteries considering temperature effects10.1016/j.energy.2016.10.087 ↗
23. Towards a smarter hybrid energy storage system based on battery and ultracapacitor - a critical review on topology and energy management10.1016/j.jclepro.2018.08.134 ↗
24. Optimization of multi-stage constant current charging pattern based on Taguchi method for Li-Ion battery10.1016/j.apenergy.2019.114148 ↗
25. Pulse-based fast battery IoT charger using dynamic frequency and duty control techniques based on multi-Sensing of polarization curve10.3390/en9030209 ↗
26. Optimized charging of lithium-ion battery for electric vehicles: adaptive multistage constant current–constant voltage charging strategy10.1016/j.renene.2019.08.077 ↗
27. Online state-of-health estimation for lithium-ion batteries using constant-voltage charging current analysis10.1016/j.apenergy.2018.01.010 ↗
28. Design of duty-varied voltage pulse charger for improving Li-Ion battery-charging response10.1109/TIE.2008.2002725 ↗
29. A PSO-based fuzzy-controlled Searching for the optimal charge pattern of Li-Ion batteries10.1109/TIE.2014.2363049 ↗
30. Search for an optimal five-step charging pattern for Li-Ion batteries using consecutive orthogonal arrays10.1109/TEC.2010.2103077 ↗
31. Lithium-ion battery modelling and parameter identification based on fractional theory10.1016/j.energy.2018.09.101 ↗
32. A simple behavioural model for solar module electric characteristics based on the first order system step response for MPPT study and comparison10.1016/j.apenergy.2011.09.036 ↗
33. A real-time estimator for model parameters and state of charge of lead acid batteries in photovoltaic applications10.1016/j.est.2020.102184 ↗
34. Multiple parameter identification using genetic algorithm in vanadium redox flow batteries10.1016/j.jpowsour.2019.227684 ↗
35. Real-Time Locally Optimal Schedule for Electric Vehicle Load via Diversity-Maximization NSGA-II10.35833/MPCE.2020.000093 ↗
36. High-speed control strategy for permanent magnet synchronous machines in electric vehicles drives: Analysis of dynamic torque response and instantaneous current compensation10.1016/j.egyr.2020.08.016 ↗
37. Online state-of-health estimation for lithium-ion batteries using constant-voltage charging current analysis10.1016/j.apenergy.2018.01.010 ↗
38. Investigation of capacity fade for 18650-type lithium-ion batteries cycled in different state of charge (SoC) ranges10.1016/j.jpowsour.2020.229422 ↗
39. State-of-charge estimation of lithium-ion battery pack by using an adaptive extended Kalman filter for electric vehicles10.1016/j.est.2021.102457 ↗