Methane steam reforming reaction in solid oxide fuel cells: Influence of electrochemical reaction and anode thickness
Source abstract
Abstract
The influence of operation temperature, inlet gas composition, current density and the anode thickness on the methane steam reforming reaction over nickel yttria-stabilized zirconia anodes was experimentally studied in solid oxide fuel cells. The experimental results were analyzed using data fitting in Power-Law and Langmuir–Hinshelwood kinetic models. Similar trends of dependence of methane and steam partial pressures were observed in both models. The methane reaction order is positive. Negative influence of steam partial pressure on the methane steam reforming reaction rate are found. The electrochemical reaction and anode thickness affect the reforming kinetics parameters. The anodes thickness shows particular influences on the steam reaction order, and the activation energy when a current is produced. The model evaluation suggests that the two models are comparable and the extra parameters within the Langmuir–Hinshelwood kinetic model are contributing to the lower mean absolute percentage error and higher coefficient of determination R2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalysts for Methane Reforming · Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Methane steam reforming, methanation and water gas shift: I. Intrinsic kinetics10.1002/aic.690350109 ↗
2. Fuel flexibility in power generation by solid oxide fuel cells10.1016/S0167-2738(02)00351-X ↗
3. Biosyngas utilization in solid oxide fuel cells with Ni-GDC anodes10.1115/1.2349535 ↗
4. Evaluation of high temperature gas cleaning options for biomass gasification product gas for solid oxide fuel cells10.1016/j.pecs.2012.03.006 ↗
5. Aravind · 2005 · 7
6. Catalytic hydrogen production from methane: A review on recent progress and prospect10.3390/catal10080858 ↗
7. Recent advances in the conversion of methane to synthesis gas10.1016/0920-5861(94)00080-L ↗
8. Recent progress in direct carbon solid oxide fuel cell: Advanced anode catalysts, diversified carbon fuels, and heat management
9. Biogas trace compounds impact on high-temperature fuel cells short stack performance10.1016/j.ijhydene.2020.11.273 ↗
10. Mogensen · 2011
11. CFD model for tubular SOFC directly fed by biomass10.1016/j.ijhydene.2021.02.147 ↗
12. CFD analysis of a solid oxide fuel cell with internal reforming: Coupled interactions of transport, heterogeneous catalysis and electrochemical processes10.1016/j.jpowsour.2006.08.017 ↗
13. CFD modeling of a biogas fuelled SOFC10.1016/j.ssi.2010.05.051 ↗
14. Performance degradation prediction of direct internal reforming solid oxide fuel cell due to Ni-particle coarsening in composite anode10.1016/j.enconman.2021.113902 ↗
15. Computational studies for the evaluation of fuel flexibility in solid oxide fuel cells: A case with biosyngas10.1002/fuce.201200138 ↗
16. Prediction of the performance of a solid oxide fuel cell fuelled with biosyngas: Influence of different steam-reforming reaction kinetic parameters10.1016/j.ijhydene.2012.09.061 ↗
17. Fuel cell electric vehicle as a power plant and SOFC as a natural gas reformer: An exergy analysis of different system designs10.1016/j.apenergy.2016.03.107 ↗
18. Methane/steam reforming kinetics for solid oxide fuel cells10.1016/0378-7753(94)02146-5 ↗
19. Experimental determination of kinetic rate data for sofc anodes
20. On the non-monotonic behaviour of methane-steam reforming kinetics10.1016/0009-2509(90)87036-R ↗
21. Internal steam reforming of methane over Ni-based electrode in solid oxide fuel cells10.1016/0926-860X(95)00184-0 ↗
22. The kinetics of methane steam reforming over a Ni-alpha-Al2O catalyst10.1016/S1385-8947(00)00367-3 ↗
23. Modeling elementary heterogeneous chemistry and electrochemistry in solid-oxide fuel cells10.1149/1.2116607 ↗
24. Isotopic and kinetic assessment of the mechanism of reactions of CH4 with CO2 or H2O to form synthesis gas and carbon on nickel catalysts10.1016/j.jcat.2004.02.032 ↗
25. Intrinsic kinetics of steam methane reforming on a thin, nanostructured and adherent Ni coating10.1016/j.apcatb.2018.07.015 ↗
26. Catalytic activity of Ni-YSZ-CeO2 anode for the steam reforming of methane in a direct internal-reforming solid oxide fuel cell10.1016/S0378-7753(00)00508-5 ↗
27. Study of methane steam reforming kinetics in operating solid oxide fuel cells: Influence of current density10.1016/j.ijhydene.2015.02.096 ↗
28. On direct internal methane steam reforming kinetics in operating solid oxide fuel cells with nickel-ceria anodes10.1016/j.jpowsour.2017.09.082 ↗
29. Kinetics of internal steam reforming of methane on Ni/YSZ-based anodes for solid oxide fuel cells10.1016/S0920-5861(00)00494-6 ↗
30. Electrical properties of ceria-based oxides and their application to solid oxide fuel cells10.1016/0167-2738(92)90102-U ↗
31. Reforming of natural gas in solid oxide fuel cell systems10.1016/S0378-7753(97)02763-8 ↗
32. A new nickel-ceria composite for direct-methane solid oxide fuel cells10.1016/j.ijhydene.2013.01.032 ↗
33. Effect of nickel microstructure on methane steam-reforming activity of Ni–YSZ cermet anode catalyst10.1016/j.jcat.2008.06.031 ↗
34. Mathematical modeling of Ni/GDC and Au–Ni/GDC SOFC anodes performance under internal methane steam reforming conditions10.1016/j.jcat.2013.06.015 ↗
35. Internal reforming development for solid oxide fuel cells10.1021/ie00101a009 ↗
36. Internal reforming of methane at Ni/YSZ and Ni/CGO SOFC cermet anodes10.1002/fuce.200600002 ↗
37. An analysis of biogas reforming process on Ni/YSZ and Ni/SDC catalysts
38. Intrinsic methane steam reforming kinetics on nickel-ceria solid oxide fuel cell anodes
39. Methane steam reforming over an Ni-YSZ solid oxide fuel cell anode in stack configuration10.1155/2014/710391 ↗
40. A novel approach to the experimental study on methane/steam reforming kinetics using the orthogonal least squares method10.1016/j.jpowsour.2014.03.097 ↗
41. Intrinsic reaction kinetics of methane steam reforming on a nickel/zirconia anode10.1016/S0378-7753(99)00447-4 ↗
42. Modelling of gas transport phenomena in SOFC anodes10.1016/S0378-7753(99)00356-0 ↗
43. Dynamic modelling of a direct internal reforming solid oxide fuel cell stack based on single cell experiments10.1016/j.apenergy.2019.05.053 ↗
44. CFD Analysis of a solid oxide fuel cell with internal reforming: Coupled interactions of transport, heterogeneous catalysis and electrochemical processes10.1016/j.jpowsour.2006.08.017 ↗
45. Three-dimensional thermo-fluid and electrochemical modeling of anode-supported planar solid oxide fuel cell10.1016/j.jpowsour.2010.02.016 ↗
46. Modeling of a SOFC fuelled by methane: Influence of the methane steam reforming kinetics10.1149/1.3570075 ↗
47. Modeling elementary heterogeneous chemistry and electrochemistry in solid-oxide fuel cells10.1149/1.2116607 ↗
48. Experimental and modeling study of solid oxide fuel cell operating with syngas fuel10.1016/j.jpowsour.2006.03.080 ↗
49. 3D modeling of anode-supported planar SOFC with internal reforming of methane10.1016/j.jpowsour.2007.07.003 ↗
50. Study of the reverse water gas shift (RWGS) reaction over pt in a solid oxide fuel cell (SOFC) operating under open and closed-circuit conditions10.1016/j.cattod.2007.05.026 ↗
51. The chemistry and catalysis of the water gas shift reaction: 1. The kinetics over supported metal catalysts10.1016/0021-9517(81)90263-3 ↗
52. The water-gas shift reaction: from conventional catalytic systems to pd-based membrane reactors-a review10.1002/apj.364 ↗
53. Froment · 1990
54. Three-dimensional computational fluid dynamics modeling of anode-supported planar SOFC10.1016/j.ijhydene.2010.11.018 ↗
55. Intrinsic kinetics of the internal steam reforming of CH4 over a Ni-YSZ-cermet catalyst-electrode10.1021/ie000350u ↗
56. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗
57. Kinetics of the methane steam reaction10.1002/aic.690010415 ↗
58. Effect of nickel microstructure on methane steam-reforming activity of Ni-YSZ cermet anode catalyst10.1016/j.jcat.2008.06.031 ↗
59. A reaction route graph analysis of the electrochemical hydrogen oxidation and evolution reactions10.1016/j.jelechem.2004.10.007 ↗
60. Reaction route graphs. I. Theory and algorithm10.1021/jp0374004 ↗
61. First principles calculations and experimental insight into methane steam reforming over transition metal catalysts10.1016/j.jcat.2008.08.003 ↗
62. Catalytic aspects of the steam reforming of hydrocarbons in internal reforming fuel cells10.1016/S0920-5861(97)00052-7 ↗
63. Advances in catalysts for internal reforming in high temperature fuel cells10.1016/S0378-7753(97)02753-5 ↗
64. Catalytic steam reforming of methane over Ce0. 9Gd0. 1O2- x10.1016/j.apcatb.2003.08.008 ↗
65. Mogensen · 2011
66. Steam reforming of methane over nickel: development of a multi-step surface reaction mechanism10.1007/s11244-011-9702-1 ↗
67. Kassambara · 2018