Nitrogen-functionalized carbon-supported Pt catalysts implemented in high-temperature polymer electrolyte membrane fuel cell
Source abstract
Abstract
Abstract Nitrogen-modified carbon supports were investigated in the catalyst layer of a high-temperature polymer electrolyte membrane fuel cell (HT-PEMFC) with respect to fuel cell performance, kinetic, and transport-related voltage losses. Catalysts with different amounts of nitrogen functional groups (NHx) were synthesized and characterized by elemental analysis, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The interaction between the nitrogen-containing functional groups and the phosphate ions was investigated in RDE experiments. The experiments showed that in the case of the nitrogen-functionalized catalysts, the activity is reduced by a factor of up to 2 compared with a commercial Pt/C catalyst in 0.1 M HClO4 + 0.05 M H3PO4. The interaction was further confirmed by membrane electrode assembly (MEA) testing. Impedance spectra and distribution of relaxation times (DRT) analysis were used to pinpoint the voltage losses of the fuel cell. We show that a low amount of nitrogen-containing functional groups improves performance; this can be attributed to the improved phosphoric acid distribution in the catalyst layer. This method can successfully control the acid distribution but must be fine-tuned for extended cell operation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. The CO poisoning effect in PEMFCs operational at temperatures up to 200°C10.1149/1.1619984 ↗
2. Materials and characterization techniques for high-temperature polymer electrolyte membrane fuel cells10.3762/bjnano.6.8 ↗
3. An investigation of Pt alloy oxygen reduction catalysts in phosphoric acid doped PBI fuel cells10.1016/j.jpowsour.2010.08.021 ↗
4. Enhanced electrocatalysis of the oxygen reduction reaction based on patterning of platinum surfaces with cyanide10.1038/nchem.771 ↗
5. Evaluation of electrolyte additives for high-temperature polymer electrolyte fuel cells10.1002/celc.201500561 ↗
6. Influence of the polytetrafluoroethylene content on the performance of high-temperature polymer electrolyte membrane fuel cell electrodes10.1016/j.ijhydene.2016.02.156 ↗
7. Improving the performance of high-temperature PEM fuel cells based on PBI electrolyte10.1016/j.jpowsour.2006.01.047 ↗
8. Study of the influence of the amount of PBI–H3PO4 in the catalytic layer of a high temperature PEMFC10.1016/j.ijhydene.2009.11.091 ↗
9. Mitigation strategy towards stabilizing the Electrochemical Interface under high CO and H2O containing reformate gas feed10.1016/j.electacta.2017.03.013 ↗
10. The key to high performance low Pt loaded electrodes10.1149/2.1621704jes ↗
11. Impact of carbon support functionalization on the electrochemical stability of Pt fuel cell catalysts10.1021/acs.chemmater.8b03612 ↗
12. Distribution of relaxation times analysis of high-temperature PEM fuel cell impedance spectra10.1016/j.electacta.2017.02.011 ↗
13. Advanced impedance study of polymer electrolyte membrane single cells by means of distribution of relaxation times10.1016/j.jpowsour.2018.09.004 ↗
14. N. Bevilacqua, M. A. Schmid, R. Zeis, Understanding the role of the anode on the polarization losses in high-temperature polymer electrolyte membrane fuel cells using the distribution of relaxation times analysis, J. Power Sources 471 (2020) 228469.10.1016/j.jpowsour.2020.228469 ↗
15. Impact of catalyst layer morphology on the operation of high-temperature polymer electrolyte membrane fuel cells10.1016/j.powera.2020.100042 ↗
16. Analysis of electrochemical impedance spectroscopy data using the distribution of relaxation times: a Bayesian and hierarchical Bayesian approach10.1016/j.electacta.2015.03.123 ↗
17. Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells10.1023/A:1020599525160 ↗
18. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
19. Amination and ammoxidation of activated carbons10.1016/0008-6223(94)90146-5 ↗
20. Dynamic surface rearrangement and thermal stability of nitrogen functional groups on carbon nanotubes10.1039/b812769g ↗
21. XPS of nitrogen-containing functional groups on activated carbon10.1016/0008-6223(95)00030-H ↗
22. Activity, stability and degradation of carbon supported palladium (Pd/C) fuel cell electrocatalysts for the oxygen reduction10.1149/06917.0303ecst ↗
23. Influence of phosphate anion adsorption on the kinetics of oxygen electroreduction on low index Pt (hkl) single crystals10.1039/c0cp00433b ↗
24. Mitigating phosphate anion poisoning of cathodic Pt/C catalysts in phosphoric acid fuel cells10.1021/jp309282n ↗
25. Janus Pt surfaces derivatized with zwitterionic molecules for oxygen reduction reactions in alkaline and acid electrolytes10.1016/j.nanoen.2015.08.012 ↗
26. Influence of phosphoric anions on oxygen reduction reaction activity of platinum, and strategies to inhibit phosphoric anion adsorption10.1016/S1872-2067(16)62472-5 ↗
27. Tailoring the electronic structure of nanoelectrocatalysts induced by a surface-capping organic molecule for the oxygen reduction reaction10.1021/jz400574f ↗
28. Binaphthyl-based molecular barrier materials for phosphoric acid poisoning in high-temperature proton exchange membrane fuel cells10.1039/C6RA13123A ↗
29. Role of binders in high temperature PEMFC electrode10.1149/1.3573773 ↗