Second-life applications of supercapacitors: Effective capacitance prognosis and aging
Source abstract
Abstract
The popularity of supercapacitors (SC) as an energy storage device is growing along with the development of the electrical and electronics applications demanding high operating power. Consequently, the number of retired SC cells is increasing leading to the recycling problem. Supercapacitor reaches its end-of-life (EOL) when its nominal capacitance is decreased by 20% and the initial equivalent series resistance (ESR) is increased by 100%. Under this scenario, the SC is no-longer suitable for its original purpose as a source of high power. However, the aged supercapacitors often retain enough capacity to serve the applications demanding low operating power. This paper investigates the possibility to re-purpose the aged supercapacitors for low power second-life applications. Specifically, we propose a capacitance prognosis model as a function of the operating power of second-life applications. We consider three aged Maxwell supercapacitors to illustrate the proposed scheme. Subsequently, we identify their effective capacitance considering MICAz wireless sensor module as the low power second-life application. Next, we evaluate the sensitivity and robustness of the proposed model. Finally, we study the second-life aging of the aged supercapacitors under low-power charge–discharge cycling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A fractional-order model-based state estimation approach for lithium-ion battery and ultra-capacitor hybrid power source system considering load trajectory10.1016/j.jpowsour.2019.227543 ↗
2. Supercapacitor discharge under constant resistance, constant current and constant power loads10.1016/j.jpowsour.2019.226829 ↗
3. Ultracapacitors: why, how, and where is the technology10.1016/S0378-7753(00)00485-7 ↗
4. Supercapacitor electrical and thermal modeling, identification, and validation for a wide range of temperature and power applications10.1109/TIE.2015.2494868 ↗
5. Lifetime and performance assessment of commercial electric double-layer capacitors based on cover layer formation10.1021/acsami.9b00057 ↗
6. Self-assembly of nickel phosphate-based nanotubes into two-dimensional crumpled sheet-like architectures for high-performance asymmetric supercapacitors10.1016/j.nanoen.2019.104270 ↗
7. Nanoarchitectonics: A new materials horizon for prussian blue and its analogues10.1246/bcsj.20180368 ↗
8. Bimetallic metal-organic frameworks for controlled catalytic graphitization of nanoporous carbons
9. Fabrication of flexible microsupercapacitors with binder-free ZIF-8 derived carbon films via electrophoretic deposition10.1246/bcsj.20190298 ↗
10. Three-dimensional networked metal–organic frameworks with conductive polypyrrole tubes for flexible supercapacitors10.1021/acsami.7b09944 ↗
11. Online parameter identification for supercapacitor state-of-health diagnosis for vehicular applications10.1109/TPEL.2017.2655578 ↗
12. Supercapacitors: Properties and applications10.1016/j.est.2018.03.012 ↗
13. TurboCap: A batteryless, supercapacitor-based power supply for mini-FDPM
14. A novel model-based estimation scheme for battery-double-layer capacitor hybrid energy storage systems10.1109/TCST.2017.2781650 ↗
15. An online identification algorithm to determine the parameters of the fractional-order model of a supercapacitor10.1109/TIA.2019.2947235 ↗
16. Online supercapacitor diagnosis for electric vehicle applications10.1109/TVT.2015.2454520 ↗
17. Online system identification for lifetime diagnostic of supercapacitors with guaranteed stability10.1109/TCST.2016.2520911 ↗
18. Remaining useful life prognosis of supercapacitors under temperature and voltage aging conditions10.1109/TIE.2017.2767550 ↗
19. Study of supercapacitor aging and lifetime estimation according to voltage, temperature, and RMS current10.1109/TIE.2013.2293695 ↗
20. Study of accelerated aging of supercapacitors for transport applications10.1109/TIE.2010.2048832 ↗
21. Accelerated charge–discharge cycling test and cycle life prediction model for supercapacitors in alternative battery applications10.1109/TIE.2011.2182018 ↗
22. Impact of calendar life and cycling ageing on supercapacitor performance10.1109/TVT.2009.2028431 ↗
23. Ageing behaviour of electrochemical double layer capacitors: Part I. experimental study and ageing model10.1016/j.jpowsour.2007.07.021 ↗
24. Ageing behaviour of electrochemical double layer capacitors: Part II. Lifetime simulation model for dynamic applications10.1016/j.jpowsour.2007.07.059 ↗
25. The reuse of electrified vehicle batteries as a means of integrating renewable energy into the European electricity grid: A policy and market analysis10.1016/j.enpol.2017.11.002 ↗
26. Second life batteries lifespan: Rest of useful life and environmental analysis10.1016/j.jenvman.2018.11.046 ↗
27. Reuse of electric vehicle batteries in buildings: An integrated load match analysis and life cycle assessment approach10.1016/j.enbuild.2019.01.032 ↗
28. H. Yang, Supercapacitor energy delivery capability during a constant power discharge process, in: IECON 2018-44th Annual Conf. of the IEEE Indust. Electro. Society, 2018, pp. 1958–1963.10.1109/IECON.2018.8592745 ↗
29. Dependence of supercapacitor peukert constant on voltage, aging, and temperature10.1109/TPEL.2018.2890392 ↗
30. H. Yang, Impact of charge redistribution on delivered energy of supercapacitors with constant power loads, in: 2018 IEEE Applied Power Electronics Conference and Exposition, APEC, 2018, pp. 2686–2690.10.1109/APEC.2018.8341396 ↗
31. Charge-discharge energy efficiency analysis of ultracapacitor with fractional-order dynamics using hybrid optimization and its experimental validation10.1016/j.aeue.2017.05.011 ↗
32. Experimental and correlative analyses of the ageing mechanism of activated carbon based supercapacitor10.1016/j.electacta.2017.01.059 ↗
33. 2020
34. Calendar and cycling ageing of activated carbon supercapacitor for automotive application10.1016/j.microrel.2012.06.099 ↗
35. 2020
36. 2018
37. A generic particle swarm optimization Matlab function
38. Characterization methods and modelling of ultracapacitors for use as peak power sources10.1016/j.jpowsour.2007.02.049 ↗
39. Frequency, thermal and voltage supercapacitor characterization and modeling10.1016/j.jpowsour.2006.12.021 ↗
40. Modeling and state-of-charge estimation of supercapacitor considering leakage effect10.1109/TIE.2019.2897506 ↗
41. 2020
42. Application of Peukert’s law in supercapacitor discharge time prediction10.1016/j.est.2019.01.022 ↗
43. 2020