A fluidized-bed reactor for enhanced mass transfer and increased performance in thermally regenerative batteries for low-grade waste heat recovery
Source abstract
Abstract
Abstract A thermally regenerative battery with a fluidized-bed reactor design (TRB-FB) is developed to enhance mass transfer and promote battery performance. The results demonstrate that the fluidized-bed design induces highly efficient mass transfer and improves the battery performance considerably. Comparative tests show that the highest power density (11.6 W m−2), total charge (274.6 C), and energy density based on the anolyte volume (834.2 Wh m−3) are obtained with the TRB-FB. Moreover, reversibility testing over successive cycles reveals that the TRB-FB generates a relatively stable power output over 15 batch cycles. Although a decreased particle diameter induces better fluidization, highly efficient mass transfer, and improved performance, an exceedingly small particle diameter results in decreased fluidization and a significant dip in battery performance. The optimal particle diameter is determined to be 187.5 μm. In addition, increasing the stirring rate within a certain range further enhances mass transfer and promotes battery performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Membrane-based Ion Separation Techniques · Membrane Separation Technologies · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Capturing the invisible resource: analysis of waste heat potential in Chinese industry10.1016/j.apenergy.2015.10.060 ↗
2. A review of data center cooling technology, operating conditions and the corresponding low-grade waste heat recovery opportunities10.1016/j.rser.2013.12.007 ↗
3. Industrial waste heat recovery technologies: an economic analysis of heat transformation technologies10.1016/j.apenergy.2015.01.147 ↗
4. Charging-free electrochemical system for harvesting low-grade thermal energy10.1073/pnas.1415097111 ↗
5. Enhancement of the thermoelectric property of nanostructured polyaniline/carbon nanotube composites by introducing pyrrole unit onto polyaniline backbone via a sustainable method10.1016/j.cej.2019.03.155 ↗
6. A simple thermoelectric device based on inorganic/organic composite thin film for energy harvesting10.1016/j.cej.2017.03.023 ↗
7. Towards ionic liquid-based thermoelectrochemical cells for the harvesting of thermal energy10.1016/j.electacta.2013.08.087 ↗
8. The electrochemistry and performance of cobalt-based redox couples for thermoelectrochemical cells10.1016/j.electacta.2018.03.032 ↗
9. Emerging electrochemical and membrane-based systems to convert low-grade heat to electricity10.1039/C7EE03026F ↗
10. Pressure-retarded osmosis for power generation from salinity gradients: is it viable?10.1039/C5EE02985F ↗
11. Harvesting energy from salinity differences using battery electrodes in a concentration flow cell
12. A thermally regenerative ammonia-based battery for efficient harvesting of low-grade thermal energy as electrical power10.1039/C4EE02824D ↗
13. Enhancing low-grade thermal energy recovery in a thermally regenerative ammonia battery using elevated temperatures10.1002/cssc.201403290 ↗
14. A thermally-regenerative ammonia-based flow battery for electrical energy recovery from waste heat10.1002/cssc.201501513 ↗
15. A numerical model for a thermally-regenerative ammonia-based flow battery using for low grade waste heat recovery10.1016/j.jpowsour.2018.03.070 ↗
16. Analysis and optimization of thermally-regenerative ammonia-based flow battery based on a 3-D model10.1149/2.0711912jes ↗
17. High power thermally regenerative ammonia-copper redox flow battery enabled by a zero gap cell design, low-resistant membranes, and electrode coatings10.1021/acsaem.0c00400 ↗
18. Improved electrical power production of thermally regenerative batteries using a poly (phenylene oxide) based anion exchange membrane10.1016/j.jpowsour.2017.01.003 ↗
19. Electrical power production from low-grade waste heat using a thermally regenerative ethylenediamine battery10.1016/j.jpowsour.2017.03.074 ↗
20. A thermally regenerative ammonia battery with carbon-silver electrodes for converting low-grade waste heat to electricity10.1016/j.jpowsour.2017.10.089 ↗
21. Copper foam electrodes for increased power generation in thermally regenerative ammonia-based batteries for low-grade waste heat recovery10.1021/acs.iecr.9b00616 ↗
22. Cu/Ni composite electrodes for increased anodic coulombic efficiency and electrode operation time in a thermally regenerative ammonia-based battery for converting low-grade waste heat into electricity10.1016/j.renene.2020.05.147 ↗
23. A bimetallic thermally-regenerative ammonia-based flow battery for low-grade waste heat recovery10.1016/j.jpowsour.2019.03.086 ↗
24. Decoupled electrolytes towards enhanced energy and high temperature performance of thermally regenerative ammonia batteries10.1039/D0TA03236K ↗
25. Removal of copper from water using a thermally regenerative electrodeposition battery10.1016/j.jhazmat.2016.10.022 ↗
26. Removals of Cu(II), Ni(II), Co(II) and Ag(I) from wastewater and electricity generation by bimetallic thermally regenerative electro-deposition batteries10.1016/j.seppur.2019.116230 ↗
27. On the regeneration of thermally regenerative ammonia batteries10.1007/s10800-018-1240-0 ↗
28. Achieving gradient-pore-oriented graphite felt material: meeting improved electrochemical activity and enhanced mass transport from nano to micro scale10.1039/C9TA00807A ↗
29. Phosphorus-doped graphite felt allowing stabilized electrochemical interface and hierarchical pore structure for redox flow battery10.1016/j.apenergy.2019.114369 ↗
30. Cross-dimensional model of the oxygen transport behavior in low-Pt proton exchange membrane fuel cells10.1016/j.cej.2020.125796 ↗
31. Performance of a thermally regenerative ammonia-based flow battery with 3D porous electrodes: effect of reactor and electrode design10.1016/j.electacta.2019.135442 ↗
32. 3-D printed gradient porous composite electrodes improve anodic current distribution and performance in thermally regenerative flow battery for low-grade waste heat recovery10.1016/j.jpowsour.2020.228525 ↗
33. Anodic current distribution in a liter-scale microbial fuel cell with electrode arrays10.1016/j.cej.2013.03.035 ↗
34. A review of oxy-fuel combustion in fluidized bed reactors10.1002/er.3486 ↗
35. Kinetic study of biomass char combustion in a low temperature fluidized bed reactor10.1016/j.cej.2017.08.063 ↗
36. Intermittent contact of fluidized anode particles containing exoelectrogenic biofilms for continuous power generation in microbial fuel cells10.1016/j.jpowsour.2014.03.071 ↗
37. Performance of anaerobic fluidized membrane bioreactors using effluents of microbial fuel cells treating domestic wastewater10.1016/j.biortech.2016.02.067 ↗
38. A microbial fluidized electrode electrolysis cell (MFEEC) for enhanced hydrogen production10.1016/j.jpowsour.2014.08.042 ↗
39. A two-stage microbial fuel cell and anaerobic fluidized bed membrane bioreactor (MFC-AFMBR) system for effective domestic wastewater treatment10.1021/es500737m ↗
40. Systematic analysis of interfacial resistance between the cathode layer and the current collector in lithium-ion batteries by electrochemical impedance spectroscopy10.1016/j.jpowsour.2018.09.014 ↗
41. A carbon-free lithium-ion solid dispersion redox couple with low viscosity for redox flow batteries10.1016/j.jpowsour.2016.05.033 ↗
42. Surface modification approach to TiO2 nanofluids with high particle concentration, low viscosity, and electrochemical activity10.1021/acsami.5b05864 ↗
43. An asymmetric Zn/Ag doped polyaniline microparticle suspension flow battery with high discharge capacity10.1016/j.jpowsour.2014.11.012 ↗
44. Electrochemical study on polypyrrole microparticle suspension as flowing anode for manganese dioxide rechargeable flow battery10.1016/j.jpowsour.2013.10.008 ↗
45. Thermally regenerative copper nanoslurry flow batteries for heat-to-power conversion with low-grade thermal energy10.1039/D0EE01590C ↗