Influence of Sm doping on thermodynamics and electrochemical performance of AB5+z alloys in low-temperature and high-power Ni-metal hydride batteries
Source abstract
Abstract
Abstract AB5-type negative electrode materials have been extensively used for Ni-metal hydride batteries. However, their rate capabilities have hindered them from being more extensively applied, especially in hybrid electric vehicles at low temperatures. Here, a hyper-stoichiometric AB5.09 alloy is designed and Sm is doped to achieve high-power performance. The influence of the microstructural characteristics, thermodynamic stabilities and comprehensive electrochemical performance resulting from the substitution of Sm for La and Ce is investigated. This work demonstrates that the addition of Sm results in a decrease in the maximum capacity and hydride stability. Furthermore, with the stress concentration relieving effect from the increase of anisotropy of the c/a ratio, the cycling stability increases significantly. Due to the formation of the Ni2MnAl catalytic phase, all alloys possess a high density of phase boundaries and exhibit good high-rate discharge performance. The high-rate dischargeability and specific power are further improved after Sm doping, with the high-rate discharge capacity retention rate reaching 81.4% at 3000 mA g−1. Although Sm adversely affects the surface catalytic properties of the electrodes, the high Sm content alloy exhibits higher specific power and discharge capacity at −40 °C due to the decrease in hydride stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Advanced Battery Materials and Technologies · Ammonia Synthesis and Nitrogen Reduction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Electrochemical behaviour of intermetallic-based metal hydrides used in Ni/metal hydride (MH) batteries: a review10.1016/S0360-3199(00)00127-0 ↗
2. Advanced hydrogen storage alloys for Ni/MH rechargeable batteries10.1039/C0JM01921F ↗
3. Hydrogen-A sustainable energy carrier10.1016/j.pnsc.2016.12.014 ↗
4. Electrochemical properties of the LaNi4.5Co0.25Al0.25 hydrogen storage alloy in wide temperature range10.1016/j.jallcom.2014.04.026 ↗
5. Effects of Al content on the electrochemical properties of La0.78Ce0.22Ni3.95-xCo0.65Mn0.3Si0.1Alx alloys at 20–80°C10.1016/j.ijhydene.2015.06.063 ↗
6. Progress of hydrogen storage alloys for Ni-MH rechargeable power batteries in electric vehicles: a review10.1016/j.matchemphys.2017.07.002 ↗
7. Electrochemical behaviour of some mechanically alloyed Mg—Ni-based amorphous hydrogen storage alloys*10.1524/zpch.1994.183.Part_1_2.379 ↗
8. Empowering hydrogen storage performance of MgH2 by nanoengineering and nanocatalysis10.1016/j.mtnano.2019.100064 ↗
9. Effect of substituting B for Ni on electrochemical kinetic properties of AB5-type hydrogen storage alloys for high-power nickel/metal hydride batteries10.1016/j.mseb.2010.11.013 ↗
10. Enhancing the regeneration process of consumed NaBH4 for hydrogen storage10.1002/aenm.201700299 ↗
11. Electrochemical behavior of metal hydrides10.1007/s100080000149 ↗
12. Thermodynamics of metal hydrides: tailoring reaction enthalpies of hydrogen storage materials
13. The structural and electrochemical properties of La0.7Mg0.3(Ni0.85Co0.15)x (x=3.0–5.0) hydrogen storage alloys10.1016/S0360-3199(02)00285-9 ↗
14. A study on the structure and electrochemical properties of La2Mg (Ni0.95M0.05)9(M= Co, Mn, Fe, Al, Cu, Sn) hydrogen storage electrode alloys10.1016/j.jallcom.2003.12.011 ↗
15. Closing the loop for hydrogen storage: facile regeneration of NaBH4 from its hydrolytic product10.1002/anie.201915988 ↗
16. An one-step approach towards hydrogen production and storage through regeneration of NaBH410.1016/j.ensm.2017.03.001 ↗
17. Size-dependent kinetic enhancement in hydrogen absorption and desorption of the Li−Mg−N−H system10.1021/ja806565t ↗
18. Study on kinetics and electrochemical properties of low-Co AB5-type alloys for high-power Ni/MH battery10.1016/j.electacta.2008.09.019 ↗
19. Crystal structure and electrochemical properties of rare earth non-stoichiometric AB5-type alloy as negative electrode material in Ni-MH battery10.1016/j.jssc.2004.03.018 ↗
20. Microstructures and electrochemical properties of Co-free AB5-type hydrogen storage alloys through substitution of Ni by Fe10.1016/j.electacta.2006.08.067 ↗
21. Effect of substituting Co with Fe on the cycle stabilities of the as-cast and quenched AB5-type hydrogen storage alloys10.1016/j.jpowsour.2005.02.004 ↗
22. Influence of the boron additive on the structure, thermodynamics and electrochemical properties of the MmNi3.55Co0.75Mn0.4Al0.3 hydrogen storage alloy10.1016/S0925-8388(00)01137-3 ↗
23. Hydrogen storage and electrochemical properties of Pr, Nd and Co-free La13.9Sm24.7Mg1.5Ni58Al1.7Zr0.14Ag0.07 alloy as a nickel-metal hydride battery electrode10.1016/j.jallcom.2017.10.268 ↗
24. Effect of the Sm content on the structure and electrochemical properties of La1.3−xSmxCaMg0.7Ni9 (x=0–0.3) hydrogen storage alloys10.1016/j.jpowsour.2005.04.020 ↗
25. Effect of Sm on hydrogen storage performance of La–Sm–Mg–Ni alloys10.1179/1743284714Y.0000000636 ↗
26. Effect of Sm on performance of Pr/Nd/Mg-free and low-cobalt AB4.6 alloys in nickel-metal hydride battery electrode10.1016/j.jallcom.2020.154530 ↗
27. Effect of the La/Mg ratio on the structure and electrochemical properties of LaxMg3−xNi9 (x= 1.6–2.2) hydrogen storage electrode alloys for nickel–metal hydride batteries10.1016/j.jpowsour.2003.11.044 ↗
28. Phase relations and hydrogen absorption in the lanthanum-nickel system10.1016/0022-5088(72)90191-9 ↗
29. La-Ni (Lanthanum-Nickel)10.1007/BF02645085 ↗
30. Standard enthalpies of formation of selected Ni2YZ Heusler compounds10.1016/j.jallcom.2015.11.126 ↗
31. Some factors affecting the cycle lives of LaNi5-based alloy electrodes of hydrogen batteries10.1016/0022-5088(90)90027-H ↗
32. Development of hydrogen-storage alloys for high-power nickel–metal hydride batteries10.1002/1527-2648(200107)3:7<481::AID-ADEM481>3.0.CO;2-O ↗
33. Improvement in low-temperature and instantaneous high-rate output performance of Al-free AB5-type hydrogen storage alloy for negative electrode in Ni/MH battery: effect of thermodynamic and kinetic regulation via partial Mn substituting10.1016/j.jpowsour.2017.01.023 ↗
34. A panoramic overview of hydrogen storage alloys from a gas reaction point of view10.1016/S0925-8388(99)00384-9 ↗
35. Effects of cobalt replacement by nickel, manganese, aluminium and iron on the crystallographic and electrochemical properties of AB5-type alloys10.1016/S0925-8388(03)00087-2 ↗
36. Kinetic and thermodynamic studies of hydrogen storage alloys as negative electrode materials for Ni/MH batteries: a review10.1007/s10008-013-2300-3 ↗
37. The improved electrochemical properties of novel La–Mg–Ni-based hydrogen storage composites10.1016/j.electacta.2007.04.097 ↗
38. Effects of Pd substitution on the electrochemical properties of Mg0.9−xTi0.1PdxNi (x=0.04–0.1) hydrogen storage alloys10.1016/j.jpowsour.2005.10.068 ↗
39. Hydrogenation and crystallization of amorphous phase: a new mechanism for the electrochemical capacity and its decay in milled Mg Ni alloys10.1016/j.electacta.2019.02.122 ↗
40. Reducing the electrochemical capacity decay of milled Mg–Ni alloys: the role of stabilizing amorphous phase by Ti-substitution
41. Double‐phase hydride forming compounds: a new class of highly electrocatalytic materials10.1149/1.2085893 ↗
42. Effect of crystal transformation on electrochemical characteristics of La–Mg–Ni-based alloys with A2B7-type super-stacking structures10.1016/j.ijhydene.2013.09.049 ↗
43. Effect of the cerium content on the structural and electrochemical properties of the La0.7−xCexMg0.3Ni2.875Mn0.1Co0.525 (x=0–0.5) hydrogen storage alloys10.1016/j.jallcom.2003.10.041 ↗
44. Determination of chemical diffusion coefficients in metal hydride particles with a microelectrode technique10.1149/1.1837582 ↗
45. Electrochemical determination of the diffusion-coefficient of hydrogen through an LaNi4.25Al0.75 electrode in alkaline aqueous solution10.1149/1.2050076 ↗
46. Long-life Ni-MH batteries with high-power delivery at lower temperatures: coordination of low-temperature and high-power delivery with cycling life of low-Al AB5-type hydrogen storage alloys10.1016/j.ijhydene.2018.09.166 ↗
47. The hydrogen pressure equivalent to the overpotential: observation on Pd hydrogen electrode and interpretation on the basis of a mixed-controlled mechanism10.1016/0013-4686(94)85156-5 ↗
48. Electrochemical utilization of metal hydrides10.1149/1.2119925 ↗
49. Electrochemistry of hydride-forming intermetallic compounds and alloys10.1070/RC1996v065n03ABEH000206 ↗
50. Determination of transport and electrochemical kinetic parameters of MH electrodes10.1007/BF00253458 ↗
51. The hydrogen electrode reaction characteristics of thin film electrodes of Ni-based hydrogen storage alloys10.1016/0013-4686(84)80018-3 ↗