A robust air electrode supported proton-conducting reversible solid oxide cells prepared by low temperature co-sintering
Source abstract
Abstract
Abstract The developments of proton conductive reversible solid oxide cells (H-RSOCs) for medium temperature applications are greatly hampered by the limited availability of appropriate hydrogen electrode materials. Air electrode support liberates hydrogen electrode from being support body, expanding the scope of materials research and microstructure modification of hydrogen electrode. The prevalent solid oxide fuel cells air electrode La1.2Sr0.8NiO4 (LSN) is investigated as support for the reversible cell because of its excellent electrochemical properties in this research. Good chemical compatibility has been demonstrated between LSN and BaCe0.68Zr0.1Y0.1Yb0.1Cu0.02O3-δ (BCZYYC) proton conductor. Air electrode supported Ni-BCZYYC|BCZYYC|LSN-BCZYYC single cells are prepared at a quite low temperature (1200 °C) and characterized. The single cell achieved a current density of 297 mA cm-2 at 1.3 V and a maximum power density (MPD) of 120 mW cm-2 in fuel cell operational mode at 700 °C, which is encouraging to get such performance by adopting both un-modified hydrogen and oxygen electrode. The cell performance remains stable during the switching of electrolysis cell and fuel cell mode of 400 h and stays stable after 20 thermal cycles and 5 fuel gas interruptions, which makes it the most stable proton-conducting reversible cells so far, indicating that LSN-BCZYYC is the potential support for H-RSOC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Current developments in reversible solid oxide fuel cells10.1016/j.rser.2016.03.005 ↗
2. Hypothesis of thermal and mechanical energy storage with unconventional methods10.1016/j.enconman.2020.113014 ↗
3. Multifactor performance analysis of reversible solid oxide cells based on proton-conducting electrolytes10.1016/j.apenergy.2019.01.054 ↗
4. Highly efficient reversible protonic ceramic electrochemical cells for power generation and fuel production10.1038/s41560-019-0333-2 ↗
5. Study of CaZr0.9In0.1O3−δ based reversible solid oxide cells with tubular electrode supported structure10.1016/j.ijhydene.2017.07.195 ↗
6. Progress in low-temperature solid oxide fuel cells with hydrocarbon fuels10.1016/j.cej.2020.126235 ↗
7. Highly performing chromate-based ceramic anodes (Y0.7Ca0.3Cr1–xCuxO3−δ) for low-temperature solid oxide fuel cells10.1021/acsami.8b07987 ↗
8. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
9. A perspective on low-temperature solid oxide fuel cells10.1039/C5EE03858H ↗
10. Enhanced performance of solid oxide fuel cells using BaZr0.2Ce0.7Y0.1O3−δ thin films10.1016/j.jpowsour.2017.04.010 ↗
11. A new Dy-doped BaCeO3–BaZrO3 proton-conducting material as a promising electrolyte for reversible solid oxide fuel cells10.1039/C6TA06414K ↗
12. New, efficient, and reliable air electrode material for proton-conducting reversible solid oxide cells10.1021/acsami.7b16703 ↗
13. Electrochemical properties of micro-tubular intermediate temperature solid oxide fuel cell with novel asymmetric structure based on BaZr0.1Ce0.7Y0.1Yb0.1O3−δ proton conducting electrolyte10.1016/j.ijhydene.2019.04.264 ↗
14. Towards the next generation of solid oxide fuel cells operating below 600°C with chemically stable proton-conducting electrolytes10.1002/adma.201103102 ↗
15. Tailoring a micro-nanostructured electrolyte-oxygen electrode interface for proton-conducting reversible solid oxide cells
16. Tailoring electronic structure of perovskite cathode for proton-conducting solid oxide fuel cells with high performance10.1016/j.jpowsour.2021.229486 ↗
17. Large-area solid oxide cells with La0.6Sr0.4CoO3-δ infiltrated oxygen electrodes for electricity generation and hydrogen production10.1016/j.jpowsour.2020.227742 ↗
18. Optimization of anode structure for intermediate temperature solid oxide fuel cell via phase-inversion cotape casting10.1111/jace.14907 ↗
19. Recent progress in the development of anode materials for solid oxide fuel cells10.1002/aenm.201100108 ↗
20. Effects of porous support microstructure enabled by the carbon microsphere pore former on the performance of proton-conducting reversible solid oxide cells10.1016/j.ijhydene.2018.09.011 ↗
21. Thermodynamic and experimental assessment of proton conducting solid oxide fuel cells with internal methane steam reforming10.1016/j.apenergy.2018.04.062 ↗
22. Development of novel anode material for intermediate temperature SOFC (IT-SOFC)10.1039/C6TA03404G ↗
23. Pr0.5Ba0.5Co0.7Fe0.25Nb0.05O3-δ as air electrode for solid oxide steam electrolysis cells10.1016/j.ijhydene.2019.07.050 ↗
24. Sr2Fe1+xMo1−xO6−δ as anode material of cathode–supported solid oxide fuel cells10.1016/j.ijhydene.2015.12.045 ↗
25. Progress in La-doped SrTiO3 (LST)-based anode materials for solid oxide fuel cells10.1039/C3RA42666A ↗
26. Cathode-supported tubular solid oxide fuel cell technology: a critical review10.1016/j.jpowsour.2013.03.001 ↗
27. Effects of the different supported structures on tubular solid oxide fuel cell performance10.20964/2016.12.53 ↗
28. Techno-economic comparison of anode-supported, cathode-supported, and electrolyte-supported SOFCs10.1016/j.ijhydene.2018.06.114 ↗
29. Solid oxide fuel cells supported on cathodes with large straight open pores and catalyst-decorated surfaces10.1016/j.ssi.2018.05.028 ↗
30. Lattice incorporation of Cu2+ into the BaCe0.7Zr0.1Y0.1Yb0.1O3-δ electrolyte on boosting its sintering and proton-conducting abilities for reversible solid oxide cells10.1021/acsami.8b15402 ↗
31. Enhanced sinterability and conductivity of BaZr0.3Ce0.5Y0.2O3−δ by addition of bismuth oxide for proton conducting solid oxide fuel cells10.1016/j.jpowsour.2015.10.029 ↗
32. Recent advances in layered Ln2NiO4+δ nickelates: fundamentals and prospects of their applications in protonic ceramic fuel and electrolysis cells10.1039/D0TA08132A ↗
33. Sintering aids for proton-conducting oxides – a double-edged sword? A mini review10.1016/j.elecom.2020.106672 ↗
34. Progress report on proton conducting solid oxide electrolysis cells10.1002/adfm.201903805 ↗
35. Study of operating parameters for accelerated anode degradation in SOFCs10.1002/fuce.201600193 ↗
36. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
37. YSZ cathode degradation induced by moisture: an impedance spectroscopy study10.1016/j.ssi.2011.02.019 ↗
38. A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray10.1016/j.jallcom.2007.10.063 ↗
39. Effect of SrTi0.3Fe0.6Co0.1O3 infiltration on the performance of LSM-YSZ cathode supported solid oxide fuel cells with Sr(Ti,Fe)O3 anodes10.1149/09101.2417ecst ↗