Multi-state joint estimation for a lithium-ion hybrid capacitor over a wide temperature range
Source abstract
Abstract
Abstract Lithium-ion hybrid capacitors (LIHCs) have the advantages of high energy and power densities and long cycle life. This paper proposes a multi-state joint estimation method for LIHCs. The effects of temperature on the key LIHC parameters are analyzed. A first-order resistor-capacitor (RC) equivalent circuit model is used to characterize the LIHC dynamics. The coupling relationships among multiple states and LIHC parameters are derived. A recursive least squares algorithm with a variable forgetting factor (VFF-RLS) is employed to adaptively update model parameters at different temperatures. Subsequently, the online identified open-circuit voltage (OCV) is corrected by using a long short-term memory (LSTM) artificial neural network model and an ampere-hour integration method. With the corrected OCV curves and the other model parameters, the estimations of the state of charge (SOC), the remaining useful energy (RUE) and the state of energy (SOE) under dynamic operating conditions over a wide temperature range are achieved. The accuracy of the multi-state joint estimation is verified via the Federal Urban Driving Schedule (FUDS) test and the dynamic stress test (DST) at −10 °C, 25 °C and 50 °C. The root-mean-square errors (RMSEs) of the SOC, RUE and SOE estimations are 2.1%, 0.9 Wh, and 2.3%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Propagation mechanisms and diagnosis of parameter inconsistency within Li-Ion battery packs10.1016/j.rser.2019.05.042 ↗
2. Lithium ion capacitors in organic electrolyte system: scientific problems, material development, and key technologies10.1002/aenm.201801243 ↗
3. Review of supercapacitors: materials and devices10.1016/j.est.2019.01.010 ↗
4. Experimental study of thermal charge–discharge behaviors of pouch lithium-ion capacitors10.1016/j.est.2019.100902 ↗
5. Review on supercapacitors: technologies and materials10.1016/j.rser.2015.12.249 ↗
6. Review of hybrid ion capacitors: from aqueous to lithium to sodium10.1021/acs.chemrev.8b00116 ↗
7. Conway · 1999
8. An asymmetric hybrid nonaqueous energy storage cell10.1149/1.1383553 ↗
9. A high rate, high capacity and long life (LiMn2O4+AC)/Li4Ti5O12 hybrid battery–supercapacitor10.1016/j.jpowsour.2008.11.033 ↗
10. Composite LiFePO4/AC high rate performance electrodes for Li-ion capacitors10.1016/j.jpowsour.2010.11.042 ↗
11. Improving the specific energy of Li-Ion capacitor laminate cell using hybrid activated Carbon/LiNi0.5Co0.2Mn0.3O2 as positive electrodes10.1016/j.jpowsour.2018.01.036 ↗
12. Redox electrode materials for supercapatteries10.1016/j.jpowsour.2016.04.095 ↗
13. Core-shell MnO2@CoS nanosheets with oxygen vacancies for high-performance supercapattery10.1016/j.jpowsour.2019.227335 ↗
14. State of health estimation for Li-Ion battery using incremental capacity analysis and Gaussian process regression10.1016/j.energy.2019.116467 ↗
15. Model migration based battery power capability evaluation considering uncertainties of temperature and aging10.1016/j.jpowsour.2019.227141 ↗
16. Modeling and comparative analysis of a lithium‐ion hybrid capacitor under different temperature conditions10.1002/er.5168 ↗
17. Performance analysis and modeling of three energy storage devices for electric vehicle applications over a wide temperature range10.1016/j.electacta.2019.135317 ↗
18. Critical review on the battery state of charge estimation methods for electric vehicles10.1109/ACCESS.2017.2780258 ↗
19. On-line remaining energy prediction: a case study in embedded battery management system10.1016/j.apenergy.2016.05.081 ↗
20. Multi-model probabilities based state fusion estimation method of lithium-ion battery for electric vehicles: state-of-energy10.1016/j.apenergy.2016.05.065 ↗
21. Towards a smarter battery management system: a critical review on battery state of health monitoring methods10.1016/j.jpowsour.2018.10.019 ↗
22. A comprehensive review of on-board State-of-Available-Power prediction techniques for lithium-ion batteries in electric vehicles10.1016/j.jpowsour.2016.08.031 ↗
23. Investigating the error sources of the online state of charge estimation methods for lithium-ion batteries in electric vehicles10.1016/j.jpowsour.2017.11.094 ↗
24. Influence of different open circuit voltage tests on state of charge online estimation for lithium-ion batteries10.1016/j.apenergy.2016.09.010 ↗
25. State of charge estimation for electric vehicle power battery using advanced machine learning algorithm under diversified drive cycles10.1016/j.energy.2018.08.071 ↗
26. Online available capacity prediction and state of charge estimation based on advanced data-driven algorithms for lithium iron phosphate battery10.1016/j.energy.2016.06.130 ↗
27. Accurate approach to the temperature effect on state of charge estimation in the LiFePO4 battery under dynamic load operation10.1016/j.apenergy.2017.07.056 ↗
28. Novel methods for estimating lithium-ion battery state of energy and maximum available energy10.1016/j.apenergy.2016.06.031 ↗
29. A novel approach of remaining discharge energy prediction for large format lithium-ion battery pack10.1016/j.jpowsour.2017.01.054 ↗
30. A novel Gaussian model based battery state estimation approach: state-of-Energy10.1016/j.apenergy.2015.04.062 ↗
31. Nadeau · 2015 · 383
32. On-line optimization of battery open circuit voltage for improving state-of-charge and sate-of-health estimation10.1016/j.jpowsour.2015.03.157 ↗
33. Dong · 2016 · 615
34. Combined state of charge and state of health estimation over lithium-ion battery cell cycle lifespan for electric vehicles10.1016/j.jpowsour.2014.09.146 ↗
35. Adaptive unscented Kalman filter based state of energy and power capability estimation approach for lithium-ion battery10.1016/j.jpowsour.2015.04.148 ↗
36. A method for joint estimation of state-of-charge and available energy of LiFePO4 batteries10.1016/j.apenergy.2014.08.081 ↗
37. Online parameters identification and state of charge estimation for lithium-ion capacitor based on improved Cubature Kalman filter10.1016/j.est.2019.100810 ↗
38. A fractional-order model-based state estimation approach for lithium-ion battery and ultra-capacitor hybrid power source system considering load trajectory10.1016/j.jpowsour.2019.227543 ↗
39. A lithium-ion capacitor model working on a wide temperature range10.1016/j.jpowsour.2016.12.055 ↗
40. A novel method for lithium-ion battery online parameter identification based on variable forgetting factor recursive least squares10.3390/en11061358 ↗
41. Modeling and comparative analysis of a lithium‐ion hybrid capacitor under different temperature conditions10.1002/er.5168 ↗
42. Adaptive forgetting factor recursive least square algorithm for online identification of equivalent circuit model parameters of a lithium-ion battery10.3390/en12122242 ↗
43. Open-circuit voltage-based state of charge estimation of lithium-ion battery using dual neural network fusion battery model10.1016/j.electacta.2015.12.001 ↗
44. Dynamic electric behavior and open-circuit-voltage modeling of LiFePO4-based lithium ion secondary batteries10.1016/j.jpowsour.2010.06.098 ↗
45. State of charge estimation of Li-ion battery at low temperature
46. Learning nonregular languages: a comparison of simple recurrent networks and LSTM10.1162/089976602320263980 ↗