journal article·2020-04

Interface equilibrium modeling of all-solid-state lithium-ion thin film batteries

Yao Liu, Yang-Bin Ma, Wolfram Jaegermann, René Hausbrand, Bai-Xiang Xu

Publisher page

Abstract

Abstract Dynamic modeling of all-solid-state batteries (SSBs) has gained strong research interest in recent years. However, the intrinsic equilibrium state, important for the exchange current calculation and the interface resistance analysis is hardly addressed. For the first time, we introduce an advanced MPNP-FBV model which takes the electrical double layer (EDL) structure and the unoccupied regular lattice sites (vacancies) into account to illustrate the fundamental phenomena at the equilibrium state. This general model is verified from the chemical perspective and the interface experimental results in our previous investigations, which indicates that the model is able to calculate the exchange current and the charge transfer resistance from fundamental material properties. The influence on concentration and electrostatic potential by the different EDL structures, the state of charge (SOC) and the diffusivity are also investigated. Results show that the total electrostatic potential drop at the equilibrium state is related to the free enthalpy difference between the two materials. Furthermore, the charge transfer resistance with the diffuse double layer structure is higher than that with the compact double layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Reducing the charge carrier transport barrier in functionally layer-graded electrodes10.1002/anie.201707883 ↗
2. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
3. A review on modeling of electro-chemo-mechanics in lithium-ion batteries10.1016/j.jpowsour.2018.12.011 ↗
4. Advances in three-dimensional graphene-based materials: configurations, preparation and application in secondary metal (li, na, k, mg, al)-ion batteries10.1039/C8EE03014F ↗
5. Recycling of lithium-ion batteries: recent advances and perspectives10.1016/j.jpowsour.2018.07.116 ↗
6. All-solid-state lithium-ion microbatteries: a review of various three-dimensional concepts10.1002/aenm.201000002 ↗
7. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
8. Promises, challenges, and recent progress of inorganic solid-state electrolytes for all-solid-state lithium batteries10.1002/adma.201705702 ↗
9. Design principles for solid-state lithium superionic conductors10.1038/nmat4369 ↗
10. Recent advances in all-solid-state rechargeable lithium batteries10.1016/j.nanoen.2017.01.028 ↗
11. A novel all-solid-state thin-film-type lithium-ion battery with in situ prepared positive and negative electrode materials10.1016/j.elecom.2008.12.004 ↗
12. Bendable inorganic thin-film battery for fully flexible electronic systems10.1021/nl302254v ↗
13. Reaction and space charge layer formation at the LiCoO2–LiPON interface: insights on defect formation and ion energy level alignment by a combined surface science–simulation approach10.1021/acs.chemmater.7b00890 ↗
14. Interfacial energy level alignment and energy level diagrams for all-solid Li-ion cells: impact of Li-ion transfer and double layer formation10.1016/j.ssi.2015.12.029 ↗
15. Local structure and ionic conduction at interfaces of electrode and solid electrolytes10.1149/2.035204jes ↗
16. Modeling of the electrochemical double layer and its impact on intercalation reactions10.1039/C8CP05113E ↗
17. Modeling and simulation of 2d lithium-ion solid state battery10.1002/er.3344 ↗
18. Analytical modeling and simulation of electrochemical charge/discharge behavior of Si thin film negative electrodes in Li-ion cells10.1016/j.jpowsour.2013.08.092 ↗
19. Mathematical model reformulation for lithium-ion battery simulations: galvanostatic boundary conditions10.1149/1.3065083 ↗
20. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
21. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
22. Analysis of diffuse-layer effects on time-dependent interfacial kinetics
23. Diffuse-charge dynamics in electrochemical systems10.1103/PhysRevE.70.021506 ↗
24. Newman · 2012
25. A mathematical model for all solid-state lithium-ion batteries10.1149/1.3393864 ↗
26. Steric effects in electrolytes: a modified Poisson-Boltzmann equation10.1103/PhysRevLett.79.435 ↗
27. Steric effects in the dynamics of electrolytes at large applied voltages. II. modified Poisson-nernst-planck equations
28. An advanced model framework for solid electrolyte intercalation batteries10.1039/c0cp02473b ↗
29. Modeling all-solid-state Li-ion batteries10.1149/1.3521414 ↗
30. Mathematical modeling of intercalation batteries at the cell level and beyond10.1039/c2cs35050e ↗
31. Charge/discharge simulation of an all-solid-state thin-film battery using a one-dimensional model10.1149/2.041202jes ↗
32. Modeling and simulation of electrochemical cells under applied voltage10.1016/j.electacta.2017.10.047 ↗
33. Thermodynamically consistent three-dimensional electrochemical model for polymeric membranes10.1016/j.electacta.2018.06.174 ↗
34. Diffusion-migration transport in a system with butler-volmer kinetics, an exact solution10.1016/0013-4686(94)00359-9 ↗
35. Wasserstoffüberspannung und struktur der doppelschicht10.1515/zpch-1933-16411 ↗
36. Current-voltage relations for electrochemical thin films10.1137/040609938 ↗
37. Imposed currents in galvanic cells10.1016/j.electacta.2009.03.073 ↗
38. Diffuse-charge effects on the transient response of electrochemical cells
39. Theory of chemical kinetics and charge transfer based on nonequilibrium thermodynamics10.1021/ar300145c ↗
40. Theory of linear sweep voltammetry with diffuse charge: unsupported electrolytes, thin films, and leaky membranes
41. Influence of sputtering conditions on ionic conductivity of LiPON thin films10.1016/j.ssi.2005.10.021 ↗
42. Inorganic solid Li ion conductors: an overview10.1016/j.ssi.2009.03.022 ↗
43. Determination of activation energy for li ion diffusion in electrodes10.1021/jp8099576 ↗
44. Energy level offsets and space charge layer formation at electrode-electrolyte interfaces: X-ray photoelectron spectroscopy analysis of Li-ion model electrodes10.1016/j.tsf.2017.07.061 ↗
45. Experimental studies on work functions of Li+ ions and electrons in the battery electrode material LiCoO2: a thermodynamic cycle combining ionic and electronic structure10.1002/aenm.201703411 ↗
46. Surface and bulk properties of Li-ion electrodes–a surface science approach10.1016/j.elspec.2017.04.001 ↗
47. Thermodynamic derivation of a butler–volmer model for intercalation in Li-ion batteries10.1016/j.electacta.2013.06.043 ↗
48. Maier · 2004
49. Sato · 1998
50. Hamann · 1998
51. Thermodynamic consistent transport theory of Li-ion batteries10.1016/j.jpowsour.2010.11.088 ↗
52. Moose: a parallel computational framework for coupled systems of nonlinear equations10.1016/j.nucengdes.2009.05.021 ↗
53. Physical interpretations of nyquist plots for EDLC electrodes and devices10.1021/acs.jpcc.7b10582 ↗
54. Luntz · 2015
55. Li+ defects in a solid-state Li ion battery: theoretical insights with a Li3OCl electrolyte10.1021/acs.chemmater.7b00659 ↗
56. Surface and interface analysis of LiCoO2 and LiPON thin films by photoemission: implications for Li-ion batteries10.1515/zpch-2014-0664 ↗
57. Lili han, nathanael grillon, delphine guy-bouyssou, emilien bouyssou, marina proust, and ying shirley meng. Effects of cathode electrolyte interfacial (CEI) layer on long term cycling of all-solid-state thin-film batteries10.1016/j.jpowsour.2016.05.098 ↗
58. Ac impedance and state-of-charge analysis of a sealed lithium-ion rechargeable battery10.1007/s100080050173 ↗
59. Combined experimental and numerical evaluation of the differences between convective and conductive thermal control on the performance of a lithium ion cell10.1016/j.energy.2017.12.032 ↗
60. Phenomenological expression of solid-state redox potentials of LiCoO2, LiCo1/2Ni1/2O2, and LiNiO2 insertion electrodes10.1149/1.1837895 ↗