Influence of the strontium content on the performance of La1-xSrxMnO3/Bi1.5Er0.5O3 composite electrodes for low temperature Solid Oxide Fuel Cells
Source abstract
Abstract
Abstract The possibility to use bilayer electrolytes based on bismuth oxide conductors should lead to a drastic decrease of solid oxide fuel cell (SOFC) operation temperature and calls for a reevaluation of some of the parameters optimized for high temperature applications. In this work we reinvestigate the promising La1-xSrxMnO3/Bi1.5Er0.5O3 (LSM/ESB) composite electrodes, varying the strontium content from x ~ 0.2, the typical high temperature LSM composition, to evaluate the optimum composition. Increasing the strontium content up to x = 0.4–0.5 leads to a 14% decrease of the activation energy, resulting in a 50% decrease in the polarization resistance of symmetric cells at 500 °C compared to the traditional La0.85Sr0.15MnO3 composition with similar microstructure. The electrode performance is deteriorated by further increase in the strontium content. Based on surface composition, investigated by low energy ion scattering, we show that the SrO surface segregation proposed as the main deterioration mechanism for LSM based HT-SOFC is not an issue below 800 °C. Furthermore, we propose that the increase in performance is related to the decrease of cationic vacancies in LSM observed for high strontium content, which may help the oxygen dissociation and surface transport.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Magnetic and transport properties of perovskites and related materials · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Current status of fuel cell based combined heat and power systems for residential sector10.1016/j.jpowsour.2015.05.050 ↗
2. A perspective on low-temperature solid oxide fuel cells10.1039/C5EE03858H ↗
3. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
4. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
5. High-performance bilayered electrolyte intermediate temperature solid oxide fuel cells10.1016/j.elecom.2009.05.041 ↗
6. Recent advances in perovskite-type materials for solid oxide fuel cell cathodes10.1016/S1466-6049(01)00004-6 ↗
7. Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review10.1007/s10853-008-2966-6 ↗
8. Electrode materials and reaction mechanisms in solid oxide fuel cells: a brief review10.1007/s10008-008-0611-6 ↗
9. Electrode properties of Sr‐doped LaMnO3 on yttria‐stabilized zirconia II. Electrode kinetics10.1149/1.1837375 ↗
10. Characterization of LSM–YSZ composite electrode by Ac impedance spectroscopy
11. Electrochemical characteristics of La1−xSrxMnO3 for solid oxide fuel cell10.1016/S0254-0584(02)00091-3 ↗
12. Electronic conductivity, seebeck coefficient, defect and electronic structure of nonstoichiometric La1−xSrxMnO310.1016/S0167-2738(00)00662-7 ↗
13. Ln1-XSrxMnO3(Ln=Pr, Nd, Sm and Gd) as the cathode material for solid oxide fuel cells10.2497/jjspm.46.293 ↗
14. Crystallographic, thermal and electrochemical properties of the system La1−xSrxMnO3 for high temperature solid electrolyte fuel cells10.1016/0025-5408(89)90223-7 ↗
15. Thermodynamic representation of nonstoichiometric lanthanum manganite10.1016/0167-2738(96)00281-0 ↗
16. An investigation of shelf-life of strontium doped LaMnO3 materials10.1023/A:1004766212164 ↗
17. Nanoscale bismuth oxide impregnated (La,Sr)MnO3 cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2008.07.003 ↗
18. La0.74Bi0.10Sr0.16)MnO3−δ–(Bi2O3)0.7(Er2O3)0.3 composite cathodes for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2008.01.017 ↗
19. La0.85Sr0.15MnO3 − δ infiltrated Y0.5Bi1.5O3 cathodes for intermediate-temperature solid oxide fuel cells10.1149/1.3099321 ↗
20. Bismuth oxide-coated (La,Sr)MnO3 cathodes for intermediate temperature solid oxide fuel cells with yttria-stabilized zirconia electrolytes10.1016/j.electacta.2008.11.067 ↗
21. La0.84Sr0.16MnO3−δ cathodes impregnated with Bi1.4Er0.6O3 for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2009.06.070 ↗
22. Electrochemical characteristics of solid oxide fuel cell cathodes prepared by infiltrating (La,Sr)MnO3 nanoparticles into yttria-stabilized bismuth oxide backbones10.1016/j.ijhydene.2009.12.008 ↗
23. Interfacial modification of La0.80Sr0.20MnO3−δ–Er0.4Bi0.6O3 cathodes for high performance lower temperature solid oxide fuel cells10.1016/j.jpowsour.2012.08.004 ↗
24. Highly active and stable Er0.4Bi1.6O3 decorated La0.76Sr0.19MnO3+δ nanostructured oxygen electrodes for reversible solid oxide cells10.1039/C7TA02950K ↗
25. Electrochemical performance and stability of LSM-ESB cathode10.1149/07801.0573ecst ↗
26. Er0.4Bi1.6O3−δ – La0.8Sr0.2MnO3−δ nano-composite as a low-temperature firing cathode of solid oxide fuel cell10.1016/j.jpowsour.2017.01.110 ↗
27. Durability of (La0.8Sr0.2)0.95MnO3-δ-(Er0.2Bi0.8)2O3 composite cathodes for low temperature SOFCs10.1016/j.jpowsour.2017.06.018 ↗
28. Development of nanostructured La0.8Sr0.2MnO3−δ-Er0.4Bi1.6O3 cathodes via an infiltration process with different polymeric agents for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2016.11.175 ↗
29. Enhancing performance of La0.8Sr0.2MnO3−δ-infiltrated Er0.4Bi1.6O3 cathodes via controlling wettability and catalyst loading of the precursor solution for IT-SOFCs10.1016/j.jiec.2017.11.039 ↗
30. formation of high oxide ion conductive phases in the sintered oxides of the system Bi2O3-ln2O3 (Ln = La-Yb)10.1016/0022-4596(81)90328-5 ↗
31. Bismuth oxide based ceramics with improved electrical and mechanical properties: Part II. Structural and mechanical properties10.1016/0025-5408(88)90011-6 ↗
32. Bismuth oxide based ceramics with improved electrical and mechanical properties: Part I. Preparation and characterisation10.1016/0025-5408(87)90006-7 ↗
33. Ca3Co4O9+δ, a growing potential SOFC cathode material: impact of the layer composition and thickness on the electrochemical properties10.1016/j.ssi.2016.06.001 ↗
34. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
35. Structural phase diagram of La1-xSrxMnO3+ δ: relationship to magnetic and transport properties10.1103/PhysRevB.54.6172 ↗
36. Determination of stoichiometry in lanthanum strontium manganates(III)(IV) by wet chemical methods10.1006/jssc.1994.1377 ↗
37. Defect chemistry modelling of oxygen-stoichiometry, vacancy concentrations, and conductivity of (La1−xSrx)YMnO3±δ10.1016/S0167-2738(99)00322-7 ↗
38. Metal-insulator transitions10.1103/RevModPhys.70.1039 ↗
39. Insulator-metal transition and giant magnetoresistance in La1-xSrMnO310.1103/PhysRevB.51.14103 ↗
40. Magnetism and structural distortion in the La0.7Sr0.3MnO3 metallic ferromagnet10.1103/PhysRevB.53.14285 ↗
41. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
42. A SIMS study of oxygen tracer diffusion and surface exchange in La0.8Sr0.2MnO3+δ10.1016/S0167-577X(99)00228-1 ↗
43. Oxygen transport in La1−xSrxMn1−yCoyO3±δ perovskites: Part II. Oxygen surface exchange10.1016/S0167-2738(99)00228-3 ↗
44. Surface termination and subsurface restructuring of perovskite-based solid oxide electrode materials10.1039/C4EE01497A ↗
45. Hess
46. In situ study of activation and de-activation of LSM fuel cell cathodes – electrochemistry and surface analysis of thin-film electrodes10.1016/j.jcat.2012.07.010 ↗
47. X-ray photoelectron spectroscopy of La0.5Sr0.5MnO310.1016/j.matlet.2005.01.038 ↗
48. A comparative study of the surface and bulk properties of lanthanum-strontium-manganese oxides La1−xSrxMnO3±δ as a function of Sr-content, oxygen potential and temperature10.1016/S0167-2738(98)00260-4 ↗
49. Investigation of chemisorbed oxygen, surface segregation and effect of post-treatments on La0.8Sr0.2MnO3 powder and screen-printed layers for solid oxide fuel cell cathodes10.1016/j.apsusc.2006.10.019 ↗
50. Measurement of oxygen transport in La0.8Sr0.2MnO3 perovskite grains10.1016/j.ssi.2012.01.029 ↗