Direct dimethyl ether fuel cells with low platinum-group-metal loading at anode: Investigations of operating temperatures and anode Pt/Ru ratios
Source abstract
Abstract
Abstract Direct dimethyl ether fuel cell is a promising electricity generator due to its highly theoretical energy density, low toxicity, zero NOx and SOx emission, and low fuel crossover from anode to cathode. So far, tremendous investigations have been mainly focused on the development of highly active anode catalysts; while limited efforts were made on the comprehensive operation optimization, especially for the operating temperature and anode composition. Besides, the recent investigations usually used high Pt group metal loading at anode (>3.7 mgPGM cm−2), which is against the current tendency of decreasing Pt-based metal dosage. Herein, we particularly investigate the effects of operating temperatures and Pt/Ru ratios on the DDMEFC performance in a practical reactor with low anode PGM loading (1 mgPGM cm−2) using saturated DME aqueous solution as anode fuel. At 110 °C, the anode Pt1Ru1/C and Pt2Ru1/C catalysts demonstrate the superior current density of ∼117 mA cm−2 and 145 mA cm−2 at 0.5 V. Particularly, the high Pt/Ru ratios present better maximum power density than low Pt/Ru ratios at low temperatures, e.g. 80 °C, but inversely deliver worse performance at high temperatures. This interesting phenomenon is likely due to the temperature-dependent rate determining step transfer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
2. Dimethyl ether (DME) as an alternative fuel10.1016/j.jpowsour.2005.05.082 ↗
3. Investigation of a novel MEA for direct dimethyl ether fuel cell10.1016/j.elecom.2007.11.035 ↗
4. Direct dimethyl ether fueling of a high temperature polymer fuel cell10.1016/j.jpowsour.2012.03.039 ↗
5. Direct dimethyl-ether proton exchange membrane fuel cells and the use of heteropolyacids in the anode catalyst layer for enhanced dimethyl ether oxidation10.1016/j.jpowsour.2009.07.011 ↗
6. Anode reaction mechanism and crossover in direct dimethyl ether fuel cell10.1016/j.jpowsour.2005.05.041 ↗
7. Electro-oxidation of dimethyl ether in a polymer-electrolyte-membrane fuel cell10.1149/1.1394018 ↗
8. Suppression effect of small organic molecules on oxygen reduction activity of Fe/N/C catalysts10.1021/acsenergylett.8b00516 ↗
9. Constructing a triple-phase interface in micropores to boost performance of Fe/N/C catalysts for direct methanol fuel cells10.1021/acsenergylett.7b00071 ↗
10. Liquid-inlet online electrochemical mass spectrometry for the in operando monitoring of direct ethanol fuel cells10.1016/j.elecom.2017.12.028 ↗
11. Electro-oxidation of dimethyl ether on Pt/C and PtMe/C catalysts in sulfuric acid10.1016/j.electacta.2006.04.037 ↗
12. Adsorption and electrooxidation of dimethyl ether on platinized platinum electrode in sulfuric acid solution10.1134/S1023193510020138 ↗
13. Direct dimethyl ether fuel cell with much improved performance10.1007/s12678-014-0196-z ↗
14. The electro-oxidation of dimethyl ether on platinum-based catalyst10.1016/j.electacta.2008.05.044 ↗
15. Direct electro-oxidation of dimethyl ether on Pt-Cu nanochains10.1002/cssc.201700702 ↗
16. Investigation of an anode catalyst for a direct dimethyl ether fuel cell10.1021/ef8005965 ↗
17. Pt/C anodic catalysts with controlled morphology for direct dimethyl ether fuel cell: the role of consecutive surface10.1016/j.electacta.2011.04.106 ↗
18. Electrochemical and infrared study of electro-oxidation of dimethyl ether (DME) on platinum polycrystalline electrode in acid solutions10.1016/j.electacta.2008.01.109 ↗
19. High-activity PtRuPd/C catalyst for direct dimethyl ether fuel cells10.1002/anie.201500454 ↗
20. Effect of pressure for direct fuel cells using DME-based fuels10.1016/j.jpowsour.2007.12.046 ↗
21. Highly active Pt x Pd y/SnO 2/C catalyst for dimethyl ether oxidation in fuel cells10.1016/j.jpowsour.2018.06.002 ↗
22. Ternary PtRuPd/C catalyst for high-performance, low-temperature direct dimethyl ether fuel cells10.1002/celc.201600336 ↗
23. Performance of direct dimethyl ether fuel cells at low temperature10.1016/j.elecom.2005.09.023 ↗
24. Progress in development of direct dimethyl ether fuel cells10.1016/j.apcatb.2009.06.018 ↗
25. Comparative investigation of dimethyl ether gas and solution as fuel under direct fuel cells10.1149/1.2978085 ↗
26. Advanced catalyst supports for PEM fuel cell cathodes10.1016/j.nanoen.2016.03.016 ↗
27. Comparison of different promotion effect of PtRu/C and PtSn/C electrocatalysts for ethanol electro-oxidation10.1016/j.electacta.2007.04.056 ↗
28. Metal-organic coordination networks: prussian blue and its synergy with Pt nanoparticles to enhance oxygen reduction kinetics10.1021/acsami.6b02630 ↗
29. Polyelectrolyte assisted synthesis and enhanced oxygen reduction activity of Pt nanocrystals with controllable shape and size10.1021/am503372f ↗
30. Methoxy methane (dimethyl ether) as an alternative fuel for direct fuel cells10.1016/j.jpowsour.2005.07.080 ↗
31. Performance of dimethyl ether fuel cells using a Pt-Ru catalyst10.1002/eej.20072 ↗
32. Electrochemical characteristics of direct dimethyl ether fuel cells10.1016/j.ssi.2006.04.047 ↗
33. Electrocatalysis by ad-atoms: Part Ii. Enhancement of the oxidation of methanol on platinum by ruthenium ad-atoms10.1016/S0022-0728(75)80261-0 ↗