Conformal coating of cobalt oxide on solid oxide fuel cell cathode and resultant continuously increased oxygen reduction reaction kinetics upon operation
Source abstract
Abstract
Abstract To improve the sluggish oxygen reduction reaction from the cathode of solid oxide fuel cells (SOFCs), a conformal layer of catalytic CoOx grains was deposited onto the internal surface of LSM/YSZ composite cathode of commercial cells, through atomic layer deposition (ALD). Upon the electrochemical operation, the ALD coated cell has dramatic reduction of the polarization resistance, and the power density exhibits continuous increase over the course of 172 h operation at 750 °C and reaches the cell performance enhancement by a factor of 1.6, in comparison with that from the baseline operated for 96 h. Such performance enhancement was attributed to the combination of the newly added triple phase boundaries for promoting the oxygen reduction reaction, as well as the accelerated oxygen transport on the cathode surface. The present work opens the further research direction for ALD coating of non-precious metal catalyst to boost the performance of as-fabricated SOFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Yang · Science · 2009 · 326 · 12610.1126/science.1174811 ↗
2. Direct oxidation of hydrocarbons in a solid oxide fuel cell: I. Methane oxidation10.1149/1.1392521 ↗
3. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
4. Advances in cathode materials for solid oxide fuel cells: complex oxides without alkaline earth metal elements10.1002/aenm.201500537 ↗
5. Singhal · 2003
6. Enhancing SOFC cathode performance by surface modification through infiltration10.1039/c3ee42926a ↗
7. New Ba0.5Sr0.5Co0.8Fe0.2O3−δ+Co3O4 composite electrode for IT-SOFCs with improved electrical conductivity and catalytic activity10.1016/j.elecom.2010.12.012 ↗
8. In situ formation of a 3D core-shell and triple-conducting oxygen reduction reaction electrode for proton-conducting SOFCs10.1016/j.jpowsour.2018.03.029 ↗
9. An examination of LSM-LSCo mixtures for use in SOFC cathodes10.1149/1.2186183 ↗
10. Toward stabilizing Co3O4 nanoparticles as an oxygen reduction reaction catalyst for intermediate-temperature SOFCs10.1149/2.0011710jes ↗
11. Thin film SOFCs with cobalt-infiltrated cathodes10.1016/j.ssi.2004.08.017 ↗
12. Catalyst design with atomic layer deposition10.1021/cs501862h ↗
13. Enhanced oxygen reduction activity on surface-decorated perovskite thin films for solid oxide fuel cells10.1039/c1ee01245b ↗
14. Performance degradation of lanthanum strontium cobaltite after surface modification10.1149/2.0971506jes ↗
15. Toward stabilizing Co3O4 nanoparticles as an oxygen reduction reaction catalyst for intermediate-temperature SOFCs10.1149/2.0011710jes ↗
16. High-surface-area, iron-oxide films prepared by atomic layer deposition on γ-Al2O310.1016/j.apcata.2017.01.025 ↗
17. High-surface-area ceria prepared by ALD on Al2O3 support10.1016/j.apcatb.2016.08.054 ↗
18. Modification of LSF-YSZ composite cathodes by atomic layer deposition10.1149/2.0181709jes ↗
19. Nanoionics and nanocatalysts: conformal mesoporous surface scaffold for cathode of solid oxide fuel cells10.1038/srep32997 ↗
20. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
21. Impedance study of alternative (La,Sr)FeO3-δ and (La,Sr)(Co,Fe)O3-δ MIEC cathode compositions10.1149/1.3265473 ↗
22. Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells10.1023/A:1020599525160 ↗
23. Analysis of SOFCs using reference electrodes10.1149/2.093309jes ↗
24. Analysis of impedance spectra for segmented-in-series tubular solid oxide fuel cells10.1149/1.3494214 ↗
25. Degradation of anode supported cell (ASC) performance by Cr-poisoning10.1016/j.jpowsour.2010.10.033 ↗
26. Electrical and electrocatalytic properties of a La0.8Sr0.2Co0.17Mn0.83O3−δ cathode for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2012.01.021 ↗
27. Effect of sintering temperature on microstructure and performance of LSM–YSZ composite cathodes10.1016/S0167-2738(00)00818-3 ↗
28. Impedance of solid oxide fuel cell LSM/YSZ composite cathodes10.1149/1.1360203 ↗
29. Characterisation of composite SOFC cathodes using electrochemical impedance spectroscopy. Analysis of Pt/YSZ and LSM/YSZ electrodes10.1016/S0013-4686(02)00095-6 ↗
30. (La, Sr) MnO3–(Ce, Gd) O2−x composite cathodes for solid oxide fuel cells10.1016/S0167-2738(01)00871-2 ↗
31. In-situ study of operating SOFC LSM/YSZ cathodes under polarization by photoelectron microscopy10.1016/j.ssi.2008.02.033 ↗
32. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
33. Research Update: fast and tunable nanoionics in vertically aligned nanostructured films10.1063/1.4978550 ↗