journal article·2018-04

Design of fuel cell powered data centers for sufficient reliability and availability

Alexa J. Ritchie, Jacob Brouwer

Publisher page

Abstract

Abstract It is challenging to design a sufficiently reliable fuel cell electrical system for use in data centers, which require 99.9999% uptime. Such a system could lower emissions and increase data center efficiency, but the reliability and availability of such a system must be analyzed and understood. Currently, extensive backup equipment is used to ensure electricity availability. The proposed design alternative uses multiple fuel cell systems each supporting a small number of servers to eliminate backup power equipment provided the fuel cell design has sufficient reliability and availability. Potential system designs are explored for the entire data center and for individual fuel cells. Reliability block diagram analysis of the fuel cell systems was accomplished to understand the reliability of the systems without repair or redundant technologies. From this analysis, it was apparent that redundant components would be necessary. A program was written in MATLAB to show that the desired system reliability could be achieved by a combination of parallel components, regardless of the number of additional components needed. Having shown that the desired reliability was achievable through some combination of components, a dynamic programming analysis was undertaken to assess the ideal allocation of parallel components.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Estimating the energy use and deficiency potential of U.S. data centers10.1109/JPROC.2011.2155610 ↗
2. Koomey · 2011
3. Global e-Sustainability Initiative · 2012
4. IPCC · 2014
5. Cisco · 2014
6. U. S. Enviromental Protection Agency · 2016
7. A. Lovins, "Reinventing Fire," Rocky Mountain Institute.
8. A. D. Dominguez-Garcia, G. Gross and P. T. Krein, "Analysis of Design Alternatives for Supplying Electric Power to Mission-Critical Loads in Data Centers: Reliability, Environmental, and Efficiency Aspects".
9. U.S. Department of Energy · 2014
10. U.S. Environmental Protection Agency · 2007
11. Towards realizing a low cost and highly available datacenter power infrastructure
12. S. Govindan, D. Wang, L. Chen, A. Sivasubramaniam and B. Urgoankar, "Modeling and Analysis of Availability of Datacenter Power Infrastructure".
13. Fuel cells for data centers: power GenerationInches from the server
14. On the Role of fuel cells and hydrogen in a more sustainable and renewable energy future10.1016/j.cap.2009.11.002 ↗
15. M. Ishizawa, S. Okada and Y. Takashi, "Highly efficient heat recovery system for phosphoric acid ruel cells used for cooling telecommunication equipment," Journal of Power Sources, vol. 86, pp. 294–297, 200.10.1016/S0378-7753(99)00411-5 ↗
16. Servers Powered by a 10kW In-Rack ProtonExchange Membrane Fuel Cell System
17. Heat recovery and utilization technology of fuel-cell systems
18. M. Ishizawa, S. Okada and T. Yamashita, "Highly efficient heat recovery system for phosphoric acid fuel cells used for cooling telecommunication equipment," J. Power Sources, vol. 86, pp. 294–297, 200.10.1016/S0378-7753(99)00411-5 ↗
19. Ton · 2008
20. DiMola · 2015
21. Time independent and time dependent probability fo failure of solid oxide fuel cells by stress analysis and the Weibull method10.1016/j.jpowsour.2012.07.116 ↗
22. Finite Element and analytical stress analysis of a solid oxide fuel cell10.1016/j.jpowsour.2012.03.027 ↗
23. Mechanical reliability and durability of SOFC stacks, Part I: modelling of the effect of operating conditions and design alternatives on the reliability10.1016/j.ijhydene.2012.03.043 ↗
24. Mechanical reliability and durability of SOFC stacks, Part II: modelling of mechanical failure during ageing and cycling10.1016/j.ijhydene.2012.03.023 ↗
25. Simulation of thermal stresses in anode-supported sold oxide fuel cell stacks, Part I: probability of failure of the cells10.1016/j.jpowsour.2008.12.050 ↗
26. Simulation of thermal stresses in anode-supported solide oxide fuel cell stacks, Part II: loss of gas-tightness, electrical contact and thermal buckling10.1016/j.jpowsour.2008.12.039 ↗
27. Modeling of thermal stresses and probability of survival of tubular SOFC10.1016/j.jpowsour.2005.09.004 ↗
28. Modelling the impact of creep on the probability of failure of a solid oxide fuel cell stack10.1016/j.jeurceramsoc.2013.12.055 ↗
29. Fundamental mechanisms limiting solid oxide fuel cell durability10.1016/j.jpowsour.2008.02.016 ↗
30. Reliability analysis and initial requirements for FC system and stacks10.1016/j.jpowsour.2006.11.085 ↗
31. Reliability of Plug power GenSys fuel cell systems10.1016/j.jpowsour.2005.01.012 ↗
32. System reliability of fault tolerant data center
33. Reliability of example data center designs selected by tier classification
34. Kuo · 2003 · 2003
35. 2011
36. 1997
37. Barlow · 1996
38. Least-cost allocation of reliability investment10.1287/opre.10.2.249 ↗