journal article·2016-07

Mechanical degradation under hydrogen of yttrium doped barium zirconate electrolyte material prepared with NiO additive

D. Ciria, M. Ben Hassine, M. Jiménez-Melendo, A. Iakovleva, P. Haghi-Ashtiani, V. Aubin, G. Dezanneau

Publisher page

Abstract

Abstract Recently, a novel process was presented to fabricate dense yttrium-doped barium zirconate electrolytes with high proton conductivity. This process was based on the use of a NiO additive during reactive sintering. We show here that materials made from this process present a fast degradation of mechanical properties when put in hydrogen-rich conditions, while material made from conventional sintering without NiO aid remains intact in the same conditions. The fast degradation of samples made from reactive sintering, leading to sample failure under highly compressive conditions, is due to the reduction of NiO nanoparticles at grain boundaries as shown from structural and chemical analyses using Transmission Electron Microscopy. By the present study, we alert about the potential risk of cell failure due to this mechanical degradation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Current status of proton-conducting solid oxide fuel cells development10.1007/s10800-008-9744-7 ↗
2. Ceramic proton conducting membranes for the electrochemical production of syngas10.1016/j.ssi.2012.01.033 ↗
3. Steam electrolysis by solid oxide electrolysis cells (SOECs) with proton-conducting oxides10.1039/C4CS00194J ↗
4. Y-doped BaZrO3 as a chemically stable electrolyte for proton-conducting solid oxide electrolysis cells (SOECs)10.1039/C4TA07202B ↗
5. Materials challenges toward proton-conducting oxide fuel cells: a critical review10.1039/b902343g ↗
6. Advanced materials for SOFC application: strategies for the development of highly conductive and stable solid oxide proton electrolytes10.1016/j.pmatsci.2015.08.001 ↗
7. Sulfur and carbon tolerance of BaCeO3-BaZrO3 proton-conducting materials10.1016/j.jpowsour.2014.09.116 ↗
8. Structural, electronic, stability and reduction properties of perovskite surfaces: the case of rhombohedral BaCeO310.1016/j.susc.2012.03.003 ↗
9. Studies on chemical stability and electrical properties of proton conducting perovskite-like doped BaCeO310.1149/1.3464774 ↗
10. Chemical stability of doped BaCeO3-BaZrO3 solid solutions in different atmospheres10.1016/S1002-0721(08)60127-1 ↗
11. Microstructures and grain boundary conductivity of BaZr1−xYxO3 (x = 0.05, 0.10, 0.15) ceramics10.1016/j.ssi.2007.02.019 ↗
12. High total proton conductivity in large-grained yttrium-doped barium zirconate10.1021/cm900208w ↗
13. Structural study and proton transport of bulk nanograined Y-doped BaZrO3 oxide protonics materials10.1016/j.ssi.2008.01.082 ↗
14. Proton conductivity and phase composition in BaZr0.9Y0.1O3-δ10.1016/j.scriptamat.2003.11.028 ↗
15. Conductivity study of dense BaCexZr0.9-xO0.1O3-δ prepared by solid state reactive sintering at 1500 degrees C10.1016/j.ijhydene.2011.08.118 ↗
16. Proton-conducting yttrium-doped barium cerate ceramics synthesized by a cost-effective solid-state reactive sintering method
17. Solid-state reactive sintering mechanism for proton conducting ceramics10.1016/j.ssi.2013.09.025 ↗
18. Solid-state reactive sintering mechanism for large-grained yttrium-doped barium zirconate proton conducting ceramics10.1039/c0jm00381f ↗
19. Effect of NiO sintering-aid on hydration kinetics and defect-chemical parameters of BaZr0.8Y0.2O3-δ10.1016/j.ssi.2015.01.001 ↗
20. Readily processed protonic ceramic fuel cells with high performance at low temperatures10.1126/science.aab3987 ↗
21. Z-contrast STEM for materials science10.1016/0304-3991(89)90173-3 ↗
22. Electronic structure of lithium nickel oxides by electron energy loss spectroscopy10.1021/jp050486b ↗
23. High resolution electron energy loss spectroscopy of manganese oxides: application to Mn3O4 nanoparticles10.1016/j.matchar.2010.09.001 ↗
24. Modelling the impact of creep on the probability of failure of a solid oxide fuel cell stack10.1016/j.jeurceramsoc.2013.12.055 ↗
25. Mechanical reliability and durability of SOFC stacks. Part I: modelling of the effect of operating conditions and design alternatives on the reliability10.1016/j.ijhydene.2012.03.043 ↗
26. Ni/YSZ electrode degradation studied by impedance spectroscopy - effect of p(H2O)10.1016/j.ssi.2010.01.004 ↗
27. Gubner · Electrochem. Soc. Proc. Ser. · 1997 · 97–07 · 844
28. Four challenges for nickel steam-reforming catalysts10.1016/j.cattod.2005.10.002 ↗
29. Grover Coors · 2016
30. Fabrication and performance of tubular, electrode-supported BaCe0.2Zr0.7Y0.1O3–δ fuel cells10.1002/fuce.201200191 ↗