Current and temperature distributions in-situ acquired by electrode-segmentation along a microtubular solid oxide fuel cell operating with syngas
Source abstract
Abstract
Addressing the fuel distribution and endothermic cooling by the internal reforming, we have measured longitudinal current/temperature variations by “Electrode-segmentation” in a microtubular solid oxide fuel cell operated with syngas (50% pre-reformed methane) and equivalent H2/N2 (100% conversion of syngas to H2) at three different flow rates. Regardless of the syngas flow rates, currents and temperatures show irregular fluctuations with varying amplitudes from upstream to downstream segment. Analysis of the fluctuations suggests that the methane steam reforming reaction is highly affected by the H2 partial pressure. Current-voltage curves plotted for the syngas and equivalent H2/N2 flow rates reveal that the fuel depletion is enhanced toward the downstream during the syngas operation, resulting in a larger performance degradation. All the segments exhibit temperature drops with the syngas flow compared with the equivalent H2/N2 flow due to the endothermic cooling by the methane steam reforming reaction. Despite the drops, the segment temperatures remain above the furnace temperature; besides, the maximum temperature difference along the cell diminishes. The MSR reaction rate does not consistently increase with the decreasing gas inlet velocity (increasing residence time on the catalyst); which we ascribe to the dominating impact of the local temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Intrinsic reaction kinetics of methane steam reforming on a nickel/zirconia anode10.1016/S0378-7753(99)00447-4 ↗
2. Internal reforming over nickel/zirconia anodes in SOFCs operating on methane: influence of anode formulation, pre-treatment and operating conditions10.1016/S0378-7753(99)00498-X ↗
3. Numerical study of mass and heat transport in solid-oxide fuel cells running on humidified methane10.1016/j.ces.2007.01.043 ↗
4. Solid oxide fuel cells: fundamental aspects and prospects10.1016/S0013-4686(00)00330-3 ↗
5. Internal steam reforming in solid oxide fuel cells: status and opportunities of kinetic studies and their impact on modeling10.1016/j.jpowsour.2010.06.091 ↗
6. Comparison of humidified hydrogen and partly pre-reformed natural gas as fuel for solid oxide fuel cells applying fluid dynamics10.1016/j.ijheatmasstransfer.2014.06.033 ↗
7. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗
8. Electrochemical study of planar solid oxide fuel cell: role of support structures10.1016/j.jpowsour.2007.11.079 ↗
9. Review of the micro-tubular solid oxide fuel cell (Part II: cell design issues and research activities)10.1016/j.jpowsour.2013.03.191 ↗
10. Micro-tubular solid oxide fuel cells and stacks10.1016/j.jpowsour.2010.09.043 ↗
11. Modeling of gas transport phenomena in SOFC anodes10.1016/S0378-7753(99)00356-0 ↗
12. Methane/steam reforming kinetics for solid oxide fuel cells10.1016/0378-7753(94)02146-5 ↗
13. Gradual internal methane reforming in intermediate-temperature solid-oxide fuel cells10.1149/1.1838832 ↗
14. Methane reforming kinetics within a Ni/YSZ SOFC anode support10.1016/j.apcata.2005.08.003 ↗
15. Kinetics of internal steam reforming of methane on Ni/YSZ based anodes for solid oxide fuel cells10.1016/S0920-5861(00)00494-6 ↗
16. Internal reforming of methane in solid oxide fuel cell systems10.1016/S0378-7753(01)01039-4 ↗
17. Reforming of natural gas in solid oxide fuel cell systems10.1016/S0378-7753(97)02763-8 ↗
18. Internal reforming of methane at Ni/YSZ and Ni/CGO SOFC cermet10.1002/fuce.200600002 ↗
19. In-situ studies of gas phase composition and anode surface temperature through a model DIR-SOFC steam-methane reformer at 973.15K10.1016/j.ijhydene.2013.08.042 ↗
20. Definition and sensitivity analysis of a finite volume SOFC model for a tubular cell geometry10.1016/j.jpowsour.2004.01.043 ↗
21. Comprehensive numerical modeling and analysis of a cell-based indirect internal reforming tubular SOFC10.1115/1.2133804 ↗
22. In-situ diagnosis and assessment of longitudinal current variation by electrode-segmentation method in anode-supported microtubular solid oxide fuel cells10.1016/j.jpowsour.2014.12.156 ↗
23. Electrochemical impedance spectroscopy analysis of an anode-supported microtubular solid oxide fuel cell10.1149/1.3486805 ↗
24. Fuel flexibility in power generation by solid oxide fuel cells10.1016/S0167-2738(02)00351-X ↗
25. Current distribution measurement of a microtubular solid oxide fuel cell10.1149/05701.0727ecst ↗
26. Measurement of spatially resolved impedance spectroscopy with local perturbation10.1002/fuce.201200223 ↗
27. S. Gordan and B. J. McBride, Chemical Equilibrium with Applications, NASA Glenn Research Center, Available at: http://www.grc.nasa.gov/www/CEAWeb/.
28. The influence of equilibrium potential on the hydrogen oxidation kinetics of SOFC anodes10.1016/j.ssi.2006.10.020 ↗
29. Three-dimensional thermo-fluid electrochemical modeling of planar SOFC stacks10.1016/S0378-7753(02)00487-1 ↗
30. 3-D model calculation for planar SOFC10.1016/S0378-7753(01)00792-3 ↗
31. Electrochemical impedance spectroscopy study of mass transfer in an anode-supported microtubular solid oxide fuel cell
32. Thermal analysis of a microtubular solid oxide fuel cell using electrochemical impedance spectroscopy10.1149/1.3205544 ↗