Corrosion and discharge performance of AZ61, AZ63, AZ101 and AZ103 alloys as anode in magnesium-dissolved oxygen seawater long term batteries
Source abstract
Abstract
Distribution of phases, morphologies of discharge products, and concentration of Al and Zn elements in discharge products affect corrosion, anodic efficiency, and discharge performance of AZ61, AZ63, AZ101, and AZ103 alloys. The AZ101 alloy has a low overpotential for the dissolution of the Mg, which provided the highest OCP and the lowest discharge potential (−1.474 V vs SCE). The detachment of a large number of the β-Mg 17Al 12 phase particles and the loose discharge products with deep cracks on the AZ101 alloy surface provided the highest self-corrosion rate (2.225 g cm −2 year −1 ), the lowest anodic efficiency (41.76 ± 1.43%) and the lowest overpotential for hydrogen gas evolution. Fine β-Mg 17Al 12 phase particles, low concentration of Al and Zn within α-Mg, and condensed discharge products of the AZ63 alloy contribute to uniform corrosion. Despite offering a higher potential by the AZ63 alloy (−1.432 V), it has a lower chemical corrosion rate (0.476 g cm −2 year −1 ) and the highest anodic efficiency (56.07 ± 1.48). It suggests that AZ63 alloy is a good candidate as an anode for long-term seawater batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Development of a seawater battery for deep-water applications10.1016/S0378-7753(96)02483-4 ↗
2. A high-specific-energy magnesium/water battery for full-depth ocean application10.1016/j.ijhydene.2017.07.157 ↗
3. Practical application of a sea-water battery in deep-sea basin and its performance10.1016/j.jpowsour.2008.10.105 ↗
4. Sea-water battery for subsea control systems10.1016/S0378-7753(97)02477-4 ↗
5. Research progress of magnesium anodes and their applications in chemical power sources10.1016/S1003-6326(14)63367-7 ↗
6. Studies on magnesium and its alloys in battery electrolytes10.1179/000705992798268927 ↗
7. Self-corrosion, galvanic corrosion and inhibition of GW103 and AZ91D Mg alloys in ethylene glycol solution10.1179/1743278212Y.0000000051 ↗
8. A comprehensive review of the development of magnesium anodes for primary batteries10.1039/D1TA01471D ↗
9. Clarifying the decisive factors for utilization efficiency of Mg anodes for primary aqueous batteries10.1016/j.jpowsour.2019.227201 ↗
10. Magnesium alloys as anodes for neutral aqueous magnesium-air batteries10.1016/j.jma.2021.04.011 ↗
11. Corrosion of magnesium alloys: the role of alloying10.1179/1743280414Y.0000000046 ↗
12. Hot deformation and work hardening behavior of an extruded Mg–Zn–Mn–Y alloy10.1016/j.jmst.2015.10.001 ↗
13. Corrosion and discharge performance of a magnesium aluminum eutectic alloy as anode for magnesium–air batteries10.1016/j.corsci.2020.108695 ↗
14. Revealing the influence of crystallographic orientation on the electrochemical and discharge behaviors of extruded diluted Mg–Sn–Zn–Ca alloy as anode for Mg-air battery10.1016/j.jpowsour.2021.230802 ↗
15. Performance of Mg–14Li–1Al–0.1Ce as anode for Mg-air battery10.1016/j.jpowsour.2010.07.097 ↗
16. Mg-Ca binary alloys as anodes for primary Mg-air batteries10.1016/j.jpowsour.2018.05.090 ↗
17. Wrought Mg-Al-Pb-RE alloy strips as the anodes for Mg-air batteries10.1016/j.jpowsour.2019.226855 ↗
18. Ca/In micro alloying as a novel strategy to simultaneously enhance power and energy density of primary Mg-air batteries from anode aspect10.1016/j.jpowsour.2020.228528 ↗
19. Discharge properties of low-alloyed Mg–Bi–Ca alloys as anode materials for Mg–air batteries: influence of Ca alloying10.1016/j.jallcom.2020.153779 ↗
20. Performance of Mg–air battery based on AZ31 alloy sheet with twins10.1016/j.matlet.2013.09.041 ↗
21. Influence of microstructure on the corrosion of diecast AZ91D10.1016/S0010-938X(98)00121-8 ↗
22. Electrochemical behavior of Mg-Al-Zn-Ga-In alloy as the anode for seawater-activated battery10.1016/j.jmst.2019.08.052 ↗
23. Corrosion behavior of AZ31 magnesium alloy with calcium addition10.1016/j.corsci.2022.110205 ↗
24. Influence of microstructure and composition on the corrosion behaviour of Mg/Al alloys in chloride media10.1016/j.electacta.2008.06.001 ↗
25. Pressure effects on the performance and the e.m.f. of the Mg-AgCl seawater battery10.1007/BF00726087 ↗
26. Corrosion behaviour of AZ21, AZ501 and AZ91 in sodium chloride10.1016/S0010-938X(98)00078-X ↗
27. A comparative corrosion behavior of Mg, AZ31 and AZ91 alloys in 3.5% NaCl solution10.1016/j.jma.2015.02.004 ↗
28. Electrochemical investigations on AZ series magnesium alloys as anode materials in a sodium chloride solution10.1007/s11665-019-04035-w ↗
29. Discharge properties of Mg–Al–Mn–Ca and Mg–Al–Mn alloys as anode materials for primary magnesium–air batteries10.1016/j.jpowsour.2015.08.042 ↗
30. Corrosion and discharge behaviors of Mg-Al-Zn and Mg-Al-Zn-in alloys as anode materials
31. High-performance Mg–Al–Bi alloy anode for seawater batteries and related mechanisms10.3390/pr8111362 ↗
32. Grain refinement, Microstructural characterization, and tensile properties of die-cast AZ91 alloy via Lead and Tin additions
33. Corrosion behavior of AZ91 magnesium alloy in dilute NaCl solutions10.1016/j.matdes.2009.07.049 ↗
34. Electrochemical properties of magnesium alloy anodes discharged in seawater10.1016/S1003-6326(11)61447-7 ↗
35. On the corrosion behaviour of magnesium and its alloys using electrochemical techniques10.1016/S0378-7753(96)02456-1 ↗
36. The source of hydrogen evolved from a magnesium anode10.1016/j.elecom.2013.08.023 ↗
37. The behaviour of magnesium during free corrosion and potentiodynamic polarization investigated by real-time hydrogen measurement and optical imaging10.1016/j.electacta.2013.12.109 ↗
38. Evidence of the enrichment of transition metal elements on corroding magnesium surfaces using rutherford backscattering spectrometry10.1149/2.0541506jes ↗
39. Tafel slopes and corrosion rates from polarization resistance measurements10.5006/0010-9312-29.10.397 ↗
40. The differentiating polarization curve technique for the Tafel parameter estimation10.3390/catal7080239 ↗
41. Experimental investigation on corrosion inhibition of thiourea on aluminum surface in 0.5 M H2SO4 acid solution10.1134/S2070205117050227 ↗
42. Piroxicam: 2-hydroxypropyl-β-cyclodextrin complex as corrosion inhibitor for the aluminum anode in extremely alkaline-based primary batteries
43. An innovative specimen configuration for the study of Mg corrosion10.1016/j.corsci.2010.09.016 ↗
44. The source of anodic hydrogen evolution on ultra high purity magnesium10.1016/j.electacta.2016.07.018 ↗
45. The corrosion of pure Mg accelerated by haze pollutant ammonium sulphate10.1016/j.corsci.2019.01.042 ↗
46. Discharge and corrosion behaviors of Mg-Li and Mg-Li-La alloys as anodes for seawater battery10.20964/2020.11.02 ↗
47. Corrosion characterization of Mg–8Li alloy in NaCl solution10.1016/j.corsci.2009.03.011 ↗
48. Understanding magnesium corrosion—a framework for improved alloy performance10.1002/adem.200310405 ↗
49. Corrosion and anodic behaviour of zinc and its ternary alloys in alkaline battery electrolytes10.1016/0378-7753(95)02225-2 ↗
50. The difference effect and the chunk effect10.1149/1.2427579 ↗
51. Grain boundary energy anisotropy: a review10.1007/s10853-011-5677-3 ↗
52. Investigation on the discharge behaviors of AZ31 and AZ61 magnesium alloys as anode material of metal-air fuel cells10.4028/www.scientific.net/AMR.1051.211 ↗
53. Achieving ultrahigh anodic efficiency via single-phase design of Mg–Zn alloy anode for Mg–air batteries10.1021/acsami.1c18913 ↗