Vanadium nitride nanocrystals decorated ultrathin, N-rich and hierarchically porous carbon nanosheets as superior polysulfides mediator for stable lithium-sulfur batteries
Source abstract
Abstract
The diligent exploitation of high-efficiency polysulfides mediators have exhibited enormous prospects to promote the cycling performance of lithium-sulfur (Li–S) batteries with desirable sulfur loading and high sulfur utilization efficiency. Herein, we craft an elaborated catalyst of ultrafine vanadium nitride nanocrystals confined hierarchically porous, ultrathin nitrogen-doped carbon nanosheets (denoted as VN@NC) via a simple approach. Owing to the highly conductive porous carbon framework integrated with enriched V –N –C active sites, well-heterostructured VN@NC can actively favor the entrapping –adsorption – catalytic conversion of the polysulfides intermediates for boosted surface redox kinetics. As the separator interlayer, VN@NC dedicates to high-performance Li–S batteries with high discharge capacities (1594.8 mAh g −1 at 0.1 C), excellent rate capabilities (766.5 mAh g −1 at 5.0 C) and exceptional cyclic durability by a slight decay of 0.067% per cycle upon 500 cycles at 1.0 C. Interestingly, two cycled Li–S batteries after 100 cycles at 0.5 C can be connected to charge a daily smartphone. Even under elevated sulfur loading of 4.5 mg cm −2 and lean electrolyte of 8 μL mg −1, the assembled Li–S battery still maintains a stable cycling performance. The cost-effective VN@NC catalyst could offer a viable avenue to construct applicable sulfur catalysts for advanced Li–S batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. A perspective toward practical lithium-sulfur batteries10.1021/acscentsci.0c00449 ↗
2. Ultrahigh‐content Co–P cluster as a dual‐atom‐site electrocatalyst for accelerating polysulfides conversion in Li-S batteries10.1002/adfm.202207579 ↗
3. Designing high-energy lithium-sulfur batteries10.1039/C5CS00410A ↗
4. Enhanced performance of Li-S batteries due to synergistic adsorption and catalysis activity within a separation coating made of hybridized BNNSs/N-doping porous carbon fibers10.1021/acsami.2c11087 ↗
5. Surface defect engineering of a bimetallic oxide precatalyst enables kinetics-enhanced lithium-sulfur batteries10.1021/acsami.2c12507 ↗
6. Utilizing the built-in electric field of p-n junctions to spatially propel the stepwise polysulfide conversion in lithium-sulfur batteries10.1002/adma.202105067 ↗
7. A mott–Schottky heterogeneous layer for Li-S batteries: enabling both high stability and commercial‐sulfur utilization10.1002/aenm.202103657 ↗
8. Status and prospects of electrocatalysts for lithium-sulfur battery under lean electrolyte and high sulfur loading conditions
9. ZnS-SnS@NC heterostructure as robust lithiophilicity and sulfiphilicity mediator toward high-rate and long-life lithium-sulfur batteries10.1021/acsnano.1c00270 ↗
10. Zn2+–Modulated bimetallic carbides synergized with macro-mesoporous N-rich carbon enabling accelerated polysulfides conversion for high-performance Li-S batteries
11. MoP quantum dot-modified N,P-carbon nanotubes as a multifunctional separator coating for high-performance lithium-sulfur batteries10.1021/acsami.2c02212 ↗
12. NbN nanodot decorated N-doped graphene as a multifunctional interlayer for high-performance lithium-sulfur batteries10.1039/D2TA01364A ↗
13. Review on recent advances in two‐dimensional nanomaterials‐based cathodes for lithium‐sulfur batteries
14. Design of novel transition-metal-doped C6N2 with high-efficiency polysulfide anchoring and catalytic performances toward application in lithium-sulfur batteries10.1021/acsami.2c07285 ↗
15. BC6N as a promising sulfur host material for lithium-sulfur batteries10.1016/j.apsusc.2021.151843 ↗
16. Understanding the catalytic kinetics of polysulfide redox reactions on transition metal compounds in Li-S batteries10.1021/acsnano.2c08581 ↗
17. Ni-CeO2 heterostructures in Li-S batteries: a balancing act between adsorption and catalytic conversion of polysulfide10.1002/advs.202105538 ↗
18. Single nickel atoms on nitrogen-doped graphene enabling enhanced kinetics of lithium-sulfur batteries10.1002/adma.201903955 ↗
19. Single-Atom coated separator for robust lithium-sulfur batteries10.1021/acsami.9b05628 ↗
20. Advances in the development of single-atom catalysts for high-energy-density lithium-sulfur batteries10.1002/adma.202200102 ↗
21. Synergistic effect of WN/Mo2C embedded in bioderived carbon nanofibers: a rational design of a shuttle inhibitor and an electrocatalyst for lithium-sulfur batteries10.1021/acsami.2c02836 ↗
22. A conductive framework embedded with cobalt-doped vanadium nitride as an efficient polysulfide adsorber and convertor for advanced lithium-sulfur batteries10.1039/D1NH00512J ↗
23. Lightweight free-standing 3D nitrogen-doped graphene/TiN aerogels with ultrahigh sulfur loading for high energy density Li-S batteries10.1021/acsaem.1c00880 ↗
24. Co4N-Decorated 3D wood-derived carbon host enables enhanced cathodic electrocatalysis and homogeneous lithium deposition for lithium-sulfur full cells10.1002/smll.202105664 ↗
25. Ordered Dual-Channel carbon embedded with molybdenum nitride catalytically induced High-Performance Lithium-Sulfur battery10.1016/j.cej.2021.134163 ↗
26. Embedding Fe3C and Fe3N on a nitrogen-doped carbon nanotube as a catalytic and anchoring center for a high-areal-capacity Li-S battery10.1021/acsami.1c03358 ↗
27. Conductive porous laminated vanadium nitride as carbon-free hosts for high-loading sulfur cathodes in lithium-sulfur batteries10.1021/acsnano.0c07415 ↗
28. High-rate lithium-sulfur batteries enabled via vanadium nitride nanoparticle/3D porous graphene through regulating the polysulfides transformation10.1016/j.cej.2020.125432 ↗
29. Kinetic enhancement of sulfur cathodes by N-doped porous graphitic carbon with bound VN nanocrystals
30. Vanadium nitride quantum dots/holey graphene matrix boosting adsorption and conversion reaction kinetics for high-performance lithium-sulfur batteries10.1021/acsami.1c08113 ↗
31. Dual redox catalysis of VN/nitrogen-doped graphene nanocomposites for high-performance lithium-sulfur batteries10.1016/j.jechem.2021.05.015 ↗
32. V2O3/VN catalysts decorated free-standing multifunctional interlayer for high-performance Li-S battery10.1016/j.cej.2022.136082 ↗
33. Boosting catalytic activity by seeding nanocatalysts onto interlayers to inhibit polysulfide shuttling in Li-S batteries10.1002/adfm.202101980 ↗
34. Vanadium atom modulated electrocatalyst for accelerated Li-S chemistry10.1016/j.nanoen.2021.106414 ↗
35. Dual‐functional NbN ultrafine nanocrystals enabling kinetically boosted lithium-sulfur batteries10.1002/adfm.202111586 ↗
36. Hierarchically porous, ultrathin N-doped carbon nanosheets embedded with highly dispersed cobalt nanoparticles as efficient sulfur host for stable lithium-sulfur batteries10.1016/j.jechem.2020.03.014 ↗
37. Tuning 4f-center electron structure by Schottky defects for catalyzing Li diffusion to achieve long-term dendrite-free lithium metal battery10.1002/advs.202202244 ↗
38. Sulfiphilic few-layered MoSe2 nanoflakes decorated rGO as a highly efficient sulfur host for lithium-sulfur batteries10.1002/aenm.201901896 ↗
39. Functional differentiation of three pores for effective sulfur confinement in Li-S battery10.1002/smll.201703279 ↗
40. Rational design of the lotus-like N-Co2VO4-Co heterostructures with well-defined interfaces in suppressing the shuttle effect and dendrite growth in lithium-sulfur batteries10.1002/smll.202104109 ↗
41. A novel synergistic composite with multi-functional effects for high-performance Li-S batteries10.1039/C6EE00104A ↗
42. High-yield and in-situ fabrication of high-content nitrogen-doped graphene nanoribbons@Co/CoOOH as an integrated sulfur host towards Li-S batteries10.1039/C9TA13414J ↗
43. Nitrogen-doped holey graphitic carbon from 2D covalent organic polymers for oxygen reduction10.1002/adma.201306328 ↗
44. Highly efficient electrocatalysts for oxygen reduction based on 2D covalent organic polymers complexed with non-precious metals10.1002/anie.201308896 ↗
45. In situ segregation of cobalt nanoparticles on VN nanosheets via nitriding of Co2V2O7 nanosheets as efficient oxygen evolution reaction electrocatalysts10.1016/j.nanoen.2017.02.016 ↗
46. Rational design of porous nitrogen-doped Ti3C2 MXene as a multifunctional electrocatalyst for Li-S chemistry10.1016/j.nanoen.2020.104555 ↗
47. Electrostatic potential-induced Co-N4 active centers in a 2D conductive metal-organic framework for high-performance lithium-sulfur batteries
48. Thin nano cages with limited hollow space for ultrahigh sulfur loading lithium-sulfur batteries10.1021/acsami.2c12841 ↗
49. Heterostructure ZnSe-CoSe2 embedded with yolk-shell conductive dodecahedral as Two-in-one hosts for cathode and anode protection of Lithium-Sulfur full batteries10.1016/j.ensm.2022.02.010 ↗
50. Transition metal dichalcogenide atomic layers for lithium polysulfides electrocatalysis10.1021/jacs.6b08681 ↗
51. A hierarchical VN/Co3ZnC@NCNT composite as a multifunctional integrated host for lithium-sulfur batteries with enriched adsorption sites and accelerated conversion kinetics10.1039/D2TA06231C ↗
52. Uniformly controlled treble boundary using enriched adsorption sites and accelerated catalyst cathode for robust lithium-sulfur batteries10.1002/aenm.202102805 ↗
53. Highly stable lithium-sulfur batteries achieved by a SnS/porous carbon nanosheet architecture modified celgard separator10.1002/adfm.202006297 ↗
54. Nitrogen-doped CoSe2 as a bifunctional catalyst for high areal capacity and lean electrolyte of Li-S battery10.1021/acsenergylett.0c01564 ↗
55. Selective catalysis of single V atoms and VN1-x nanodots enables fast polysulfides conversion in lithium–sulfur batteries10.1016/j.cej.2022.139410 ↗
56. Unraveling the catalyst-solvent interactions in lean-electrolyte sulfur reduction electrocatalysis for Li-S batteries
57. An overlooked parameter in Li-S batteries: the impact of electrolyte-to-sulfur ratio on capacity fading10.1016/j.nanoen.2022.107913 ↗