Magnetron-sputtered thin-film catalyst with low-Ir-Ru content for water electrolysis: Long-term stability and degradation analysis
Source abstract
Abstract
Proton Exchange Membrane Water Electrolyzers (PEM-WEs) are entering the phase of commercial mass production. However, the issue of an iridium catalyst for the anode remains. This work presents an iridium-ruthenium-based catalyst (25% Ir = 158 µg cm-2, 75% Ru) prepared as a thin film on the surface-enhanced-anode of PEM-WE via magnetron sputtering. Using a strictly practical single-cell approach, without any iR corrections, we show its excellent activity – 1 A cm-2 at 1.606 V, 80 °C, and stability – 1.3 µV h-1 at 1 A cm-2 for 500 hours. Together with a purely Ir-based catalyst (158 µg cm-2), we subject it to a massive electrochemical and material analysis, showing that the thickness and interconnectivity are essential for the catalyst’s stability. This conclusion is based on results from single-cell galvanostatic measurements, Potential Electrochemical Impedance Spectroscopy (PEIS), Scanning Electron Micrsocopy (SEM), X-Ray Photoelectron Spectroscopy (XPS), and Energy Dispersive X-ray spectroscopy (EDX). Consequently, we believe that magnetron sputtering is currently the most perspective method for preparing low-Ir-loading catalysts. Compared to the nanoparticle approach, it allows the creation of very thin films with unprecedented interconnectivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hybrid Renewable Energy Systems · Electrocatalysts for Energy Conversion · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. ScienceDirect A green hydrogen economy for a renewable energy society10.1016/j.coche.2021.100701 ↗
2. The European green deal
3. Galvin · 2020 · 67
4. Ramachandran · AN OVERVIEW OF INDUSTRIAL USES OF HYDROGEN · 1998 · 23 · 593
5. Hydrogen as an energy vector10.1016/j.rser.2019.109620 ↗
6. Potential of renewable and alternative energy sources10.1088/1755-1315/27/1/012068 ↗
7. Kousksou · 2014 · vol. 120 · 59
8. Hydrogen energy, economy and storage: review and recommendation10.1016/j.ijhydene.2019.04.068 ↗
9. Koponen · 2015 · 94
10. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
11. Oxygen evolution reaction - the enigma in water electrolysis10.1021/acscatal.8b02712 ↗
12. K. Kinoshita, Carbon: Electrochemical and Physicochemical Properties, New York: Wiley, 1988, 1988.
13. Non-conductive TiO 2 as the anode catalyst support for PEM water electrolysis10.1016/j.ijhydene.2012.05.129 ↗
14. Kúš · 2019
15. Boosted performance of Ir species by employing TiN as the support toward oxygen evolution reaction10.1021/acsami.8b14172 ↗
16. Performance of a PEM water electrolyser using a TaC-supported iridium oxide electrocatalyst10.1016/j.ijhydene.2013.12.085 ↗
17. The electrocatalytic properties of an IrO 2/SnO 2 catalyst using SnO 2 as a support and an assisting reagent for the oxygen evolution reaction10.1016/j.electacta.2011.10.044 ↗
18. Current challenges in catalyst development for PEM water electrolyzers10.1002/cite.201900101 ↗
19. Sputter-etching treatment of proton-exchange membranes: completely dry thin-film approach to low-loading catalyst-coated membranes for water electrolysis10.1016/j.ijhydene.2020.05.245 ↗
20. Magnetron sputtering enabled sustainable synthesis of nanomaterials for energy electrocatalysis10.1039/D0GC03994B ↗
21. In situ probing of magnetron sputtered Pt-Ni alloy fuel cell catalysts during accelerated durability test using EC-AFM10.1016/j.electacta.2017.05.202 ↗
22. Growth of nano-porous Pt-doped cerium oxide thin films on glassy carbon substrate10.1016/j.ceramint.2012.10.215 ↗
23. Magnetron sputtered thin-film vertically segmented Pt-Ir catalyst supported on TiC for anode side of proton exchange membrane unitized regenerative fuel cells10.1016/j.ijhydene.2019.04.216 ↗
24. Novel fuel cell MEA based on Pt-C deposited by magnetron sputtering10.1149/08008.0225ecst ↗
25. From silver nanoparticles to thin films: evolution of microstructure and electrical conduction on glass substrates10.1016/j.jpcs.2008.11.012 ↗
26. Bräuer · 2014 · vol. 4 · 57
27. Oxygen evolution reaction electrocatalysis on transition metal oxides and (Oxy)hydroxides: activity trends and design principles10.1021/acs.chemmater.5b03148 ↗
28. Perovskite/carbon composites: applications in oxygen electrocatalysis10.1002/smll.201603793 ↗
29. Boosting oxygen evolution reaction by activation of lattice-oxygen sites in layered Ruddlesden-Popper oxide10.1002/eom2.12021 ↗
30. Boosting oxygen evolution reaction by creating both metal ion and lattice-oxygen active sites in a complex oxide
31. Recent advances and prospective in ruthenium-based materials for electrochemical water splitting10.1021/acscatal.9b02457 ↗
32. Stabilization of RuO2 by IrO2 for anodic oxygen evolution in acid media10.1016/0013-4686(86)80153-0 ↗
33. Uncovering the stabilization mechanism in bimetallic ruthenium-iridium anodes for proton exchange membrane electrolyzers10.1021/acs.jpclett.6b01500 ↗
34. Oxygen and hydrogen evolution reactions on Ru, RuO2, Ir, and IrO2 thin film electrodes in acidic and alkaline electrolytes: a comparative study on activity and stability10.1016/j.cattod.2015.08.014 ↗
35. Phase- and surface composition-dependent electrochemical stability of Ir-Ru nanoparticles during oxygen evolution reaction10.1021/acscatal.1c01682 ↗
36. I.M. Tomáš Hrbek, Peter Kúš, Tereza Košutová, Kateřina Veltruská, Thu Ngan Dinhová, Milan Dopita, Vladimír Matolín, Sputtered Ir-Ru based catalysts for oxygen evolution reaction: Study of iridium effect on stability, International Journal of Hydrogen Energy (In PRESS). (n.d.).
37. U. Apfel, crossing the valley of death: from fundamental to applied research in electrolysis10.1021/jacsau.1c00092 ↗
38. On the limitations in assessing stability of oxygen evolution catalysts using aqueous model electrochemical cells10.1038/s41467-021-22296-9 ↗
39. Limitations of aqueous model systems in the stability assessment of electrocatalysts for oxygen reactions in fuel cell and electrolyzers
40. Saveleva · 2018 · 296
41. Orazem · 2008
42. Equivalent electric circuit modeling and performance analysis of a PEM fuel cell stack using impedance spectroscopy10.1109/TEC.2010.2049267 ↗
43. Electrochemical impedance spectroscopy as a diagnostic tool in polymer electrolyte membrane electrolysis10.3390/ma11081368 ↗
44. Magnetron sputtered Ir thin film on TiC-based support sublayer as low-loading anode catalyst for proton exchange membrane water electrolysis10.1016/j.ijhydene.2016.06.248 ↗
45. Bruker-Nano · 2011
46. The Shirley background revised10.1016/j.elspec.2005.12.002 ↗
47. The Gaussian-Lorentzian Sum, Product, and Convolution (Voigt) functions in the context of peak fitting X-ray photoelectron spectroscopy (XPS) narrow scans10.1016/j.apsusc.2018.03.190 ↗
48. Shah · 2020
49. Practical guide for curve fitting in x-ray photoelectron spectroscopy10.1116/6.0000377 ↗
50. Intensity calibration and sensitivity factors for XPS instruments with monochromatic Ag Lα and Al Kα sources10.1002/sia.6647 ↗
51. Investigation of supported IrO2 as electrocatalyst for the oxygen evolution reaction in proton exchange membrane water electrolyser10.1016/j.ijhydene.2013.11.056 ↗
52. Analysis of voltage losses in PEM water electrolyzers with low platinum group metal loadings10.1149/2.0641805jes ↗
53. Electrochemical investigation of electrocatalysts for the oxygen evolution reaction in PEM water electrolyzers10.1016/j.ijhydene.2008.06.039 ↗
54. Amorphous Ir atomic clusters anchored on crystalline IrO2 nanoneedles for proton exchange membrane water oxidation10.1016/j.jpowsour.2022.231069 ↗
55. Efficient and stable low iridium loaded anodes for PEM water electrolysis made possible by nanofiber interlayers10.1021/acsaem.0c00735 ↗
56. Influence of iridium oxide loadings on the performance of PEM water electrolysis cells: Part II - advanced oxygen electrodes10.1016/j.apcatb.2015.09.011 ↗
57. Highly active anode electrocatalysts derived from electrochemical leaching of Ru from metallic Ir0.7Ru0.3 for proton exchange membrane electrolyzers10.1016/j.nanoen.2017.02.045 ↗
58. Hydrogen production by PEM water electrolysis – a review
59. Degradation study of a proton exchange membrane water electrolyzer under dynamic operation conditions10.1016/j.apenergy.2020.115911 ↗
60. Deconvoluting reversible and irreversible degradation phenomena in OER catalyst coated membranes using a modified RDE technique10.1149/1945-7111/abde7d ↗
61. Electrical double layer mechanism analysis of PEM water electrolysis for frequency limitation of pulsed currents10.3390/en14227822 ↗
62. Evaluation of reversible and irreversible degradation rates of polymer electrolyte membrane fuel cells tested in automotive conditions10.1016/j.jpowsour.2016.07.049 ↗
63. Microscopic insights on the degradation of a PEM water electrolyzer with ultra-low catalyst loading10.1016/j.apcatb.2019.118194 ↗
64. Degradation issues of PEM electrolysis MEAs10.1016/j.renene.2018.02.024 ↗
65. Highly active, durable dispersed iridium nanocatalysts for PEM water electrolyzers10.1149/2.0981802jes ↗
66. The influence of iridium chemical oxidation state on the performance and durability of oxygen evolution catalysts in PEM electrolysis10.1016/j.jpowsour.2017.09.020 ↗
67. Elucidating effects of catalyst loadings and porous transport layer morphologies on operation of proton exchange membrane water electrolyzers10.1016/j.apcatb.2022.121213 ↗
68. Low-loading IrO2 supported on Pt for catalysis of PEM water electrolysis and regenerative fuel cells10.1016/j.apcatb.2020.118955 ↗
69. Ni · 2022
70. Cyclic voltammetry10.1021/ed060p702 ↗
71. Kocha · 2016
72. Presentation of an Atlas of chemical and electrochemical equilibria in the presence of a gaseous phase10.4028/www.scientific.net/MSF.251-254.143 ↗
73. Characterisation tools development for PEM electrolysers10.1016/j.ijhydene.2014.02.096 ↗
74. Membrane degradation in PEM water electrolyzer: numerical modeling and experimental evidence of the influence of temperature and current density10.1016/j.ijhydene.2014.11.111 ↗
75. Investigation of mass transport losses in polymer electrolyte electrolysis cells
76. Correlation between Tafel analysis and electrochemical impedance spectroscopy by prediction of amperometric response from EIS10.1021/acsomega.9b02672 ↗
77. Revealing and accelerating slow electron transport in amorphous molybdenum sulphide particles for hydrogen evolution reaction10.1039/c3cc45416a ↗
78. Oxidatively electrodeposited thin-film transition metal (Oxy)hydroxides as oxygen evolution catalysts10.1021/jacs.6b05196 ↗
79. Improved catalytic activity of Mo1-: XWxSe2 alloy nanoflowers promotes efficient hydrogen evolution reaction in both acidic and alkaline aqueous solutions10.1039/C7NR04922F ↗
80. Degradation of proton exchange membrane (PEM) water electrolysis cells: looking beyond the cell voltage increase10.1149/2.1451910jes ↗
81. PEM single cells under differential conditions: full factorial parameterization of the ORR and HOR kinetics and loss analysis10.1149/1945-7111/ac44ba ↗
82. IrO2 coated on RuO2 as efficient and stable electroactive nanocatalysts for electrochemical water splitting10.1021/acs.jpcc.5b11868 ↗
83. Iridium as catalyst and cocatalyst for oxygen evolution/reduction in acidic polymer electrolyte membrane electrolyzers and fuel cells10.1021/cs4011875 ↗
84. Quantifying and comparing fundamental loss mechanisms to enable solar-to-hydrogen conversion efficiencies above 20% using perovskite-silicon tandem absorbers10.1002/aesr.202000039 ↗
85. A unifying view of the constant-phase-element and its role as an aging indicator for Li-ion batteries10.1149/2.0791508jes ↗
86. A generalized model of the equivalent circuits in the electrochemical impedance spectroscopy10.1016/j.electacta.2020.137199 ↗
87. Time domain characterization of the Cole-Cole dielectric model10.2478/joeb-2020-0015 ↗
88. On the intrinsic coupling between constant-phase element parameters α and Q in electrochemical impedance spectroscopy10.1016/j.electacta.2012.04.020 ↗
89. Concernng the conversion of the constant phase element parameter Y0 into a capacitance10.5006/1.3280607 ↗
90. Bard · 2001
91. Applicability of double layer capacitance measurements to monitor local temperature changes at polymer electrolyte membrane fuel cell cathodes10.1016/j.rechem.2020.100078 ↗
92. Electrochemical characterisation of copper thin-film formation on polycrystalline platinum10.1002/cphc.201200193 ↗
93. Identification of the electrical connection in the catalyst layer of the polymer electrolyte membrane water electrolyzer10.1016/j.ijhydene.2022.02.136 ↗
94. Stabilizer-free CuIr alloy nanoparticle catalysts10.1021/acs.chemmater.9b04138 ↗
95. The electronic structure of iridium and its oxides10.1002/sia.5895 ↗
96. The X-ray photoelectron spectra of Ir, IrO2 and IrCl3 revisited10.1002/sia.6225 ↗
97. Kinetics of the thermal oxidation of Ir(100) toward IrO2 studied by ambient-pressure X-ray photoelectron spectroscopy10.1021/acs.jpclett.0c00914 ↗
98. Increased Ir-Ir interaction in iridium oxide during the oxygen evolution reaction at high potentials probed by operando spectroscopy10.1021/acscatal.1c02074 ↗
99. Resolving ruthenium: XPS studies of common ruthenium materials10.1002/sia.5852 ↗
100. Surface analysis of carbon-hydrogen bonds in diamondlike carbon films by X-ray photoelectron spectroscopy10.1143/JJAP.48.092304 ↗