Design of active-material/solid-electrolyte composite particles with conductive additives for all-solid-state lithium-ion batteries
Source abstract
Abstract
All-solid-state lithium-ion batteries (ASSLIBs) are promising candidates for next-generation electric vehicle batteries. The contact interface between the active material (AM) and solid electrolyte (SE) is an important factor that affects the performance of ASSLIB. Composite particles, which are SE-coated AM particles, can form electrodes with large AM-SE contact interfaces. However, they can decrease in cell capacity because of the SE coating layer with electrical non-conductance. This study designed composite particles with conductive additives (CAs) using dry-coating. Acetylene black (AB) and vapor-grown carbon fiber (VGCF) were used as typical CAs, and the composite particles with these CAs were compared with those without CAs and simple mixture. Although the addition of CAs improved the cell capacity and decreased internal resistance, the type of CA significantly affected the rate performance. Because the VGCFs were barely incorporated into the SE coating layer, the incorporation of VGCFs did not improve the rate performance. However, the ABs were effectively incorporated into SE coating layer, resulting in the best rate performance in this study. This difference was due to the ease of supplying electrons to the AM particles. Therefore, AB was suitable for the CA of the composite particles to improve the performance of the ASSLIB.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Progress in solid electrolytes toward realizing solid-state lithium batteries10.1016/j.jpowsour.2018.05.003 ↗
2. Approaching practically accessible solid-state batteries: stability issues related to solid electrolytes and interfaces10.1021/acs.chemrev.9b00268 ↗
3. A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries10.1039/C3EE41655K ↗
4. Synthesis, structure, and conduction mechanism of the lithium superionic conductor Li10+δGe1+δP2−δS1210.1039/C4TA05231E ↗
5. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
6. Design strategies, practical considerations, and new solution processes of sulfide solid electrolytes for all-solid-state batteries10.1002/aenm.201800035 ↗
7. Toward practical all-solid-state lithium-ion batteries with high energy density and safety: comparative study for electrodes fabricated by dry- and slurry-mixing processes10.1016/j.jpowsour.2017.11.031 ↗
8. Selection of binder and solvent for solution-processed all-solid-state battery10.1149/2.1341709jes ↗
9. Effect of mixing method on the properties of composite cathodes for all-solid-state lithium batteries using Li2S–P2S5 solid electrolytes10.1016/j.jpowsour.2012.11.049 ↗
10. Dry mixing of cathode composite powder for all-solid-state batteries using high shear mixer10.1016/j.apt.2022.103705 ↗
11. All-solid-state lithium secondary batteries using LiCoO2 particles with pulsed laser deposition coatings of Li2S-P2S5 solid electrolytes10.1016/j.jpowsour.2010.10.103 ↗
12. Fabrication of electrode- electrolyte interfaces in all-solid-state rechargeable lithium batteries by using a supercooled liquid state of the glassy electrolytes10.1039/C0JM01090A ↗
13. Parametric study of dry coating process of electrode particle with model material of sulfide solid electrolytes for all-solid-state battery10.1016/j.powtec.2016.09.085 ↗
14. Dry coating of electrode particle with model particle of sulfide solid electrolytes for all-solid-state secondary battery10.1016/j.powtec.2016.03.055 ↗
15. Dry coating of active material particles with sulfide solid electrolytes for an all-solid-state lithium battery10.1016/j.jpowsour.2019.227579 ↗
16. Characterization of solid-electrolyte/active-material composite particles with different surface morphologies for all-solid-state batteries10.1016/j.apt.2022.103470 ↗
17. Synthesis of engineered particulates with tailored properties using dry particle coating10.1016/S0032-5910(01)00314-X ↗
18. Dry particle coating for improving the flowability of cohesive powders10.1016/j.powtec.2005.04.032 ↗
19. Solid electrolyte/graphite composite particle for an all-solid-state lithium-ion battery10.1016/j.apt.2022.103633 ↗
20. Effect of hybrid conductive additives on all-solid-state lithium batteries using Li2S–P2S5 glass-ceramics10.1016/j.ceramint.2014.12.076 ↗
21. Graphitic hollow nanocarbon as a promising conducting agent for solid-state lithium batteries10.1002/smll.201900235 ↗
22. High performance all-solid-state lithium-sulfur battery using a Li2S-VGCF nanocomposite10.1016/j.electacta.2017.01.155 ↗
23. AC impedance analysis of ionic and electronic conductivities in electrode mixture layers for an all-solid-state lithium-ion battery10.1016/j.jpowsour.2016.03.059 ↗
24. Electronic and ionic conductivities of LiNi1/3Mn1/3Co1/3O2-Li3PS4 positive composite electrodes for all-solid-state lithium batteries10.1149/2.1501714jes ↗
25. Bulk-type all solid-state batteries with 5 V class LiNi0.5Mn1.5O4 cathode and Li10GeP2S12 solid electrolyte10.1021/acs.chemmater.5b04940 ↗
26. Investigation on the interface between Li10GeP2S12 electrolyte and carbon conductive agents in all-solid-state lithium battery10.1038/s41598-018-26101-4 ↗
27. The detrimental effects of carbon additives in Li10GeP2S12-based solid-state batteries10.1021/acsami.7b11530 ↗
28. Modification of interface between LiCoO2 electrode and Li2S-P2S5 solid electrolyte using Li2O-SiO2 glassy layers10.1149/1.3005972 ↗
29. Enhanced electrochemical performance of surface modified LiCoO2 for all-solid-state lithium batteries10.1016/j.ceramint.2015.09.126 ↗
30. Enhanced cycling stability of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 by surface modification of MgO with melting impregnation method10.1016/j.electacta.2012.10.111 ↗
31. Ultrathin ZnO coating for improved electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material10.1016/j.jpowsour.2014.05.027 ↗
32. Analysis of the relationship between vertical imparity distribution of conductive additive and electrochemical behaviors in lithium ion batteries
33. Improved electrochemical performance of La0.7Sr0.3MnO3 and carbon co-coated LiFePO4 synthesized by freeze-drying process10.1016/j.electacta.2009.08.020 ↗
34. Ameliorating interfacial issues of LiNi0.5Co0.2Mn0.3O2/Poly(propylene carbonate) by introducing graphene interlayer for all-solid-state lithium batteries10.1002/slct.201904868 ↗
35. Microscopically porous, interconnected single crystal LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion batteries10.1039/c1jm00059d ↗
36. Characterization of mechanical degradation in an all-solid-state battery cathode10.1039/D0TA06985J ↗