journal article·2022-09Open access

Ultrasonic guided wave monitoring of dendrite formation at electrode–electrolyte interface in aqueous zinc ion batteries

Yifeng Zhang, Haobo Dong, Tianlei Wang, Guanjie He, Ivan P. Parkin, Frederic Cegla

Abstract

The formation of dendrite affects the cycling life of a battery and lead to malfunctions such as internal short-circuiting and thermal runaway events. However, existing methods to observe dendrite formation, such as X-ray computed tomography and scanning electron microscopy are either prohibitively complicated or unsuitable for long-term, in-situ monitoring. In this study we present a method which uses the fundamental shear-horizontal mode (SH0*) guided ultrasonic waves to independently monitor the status of the electrodes in a symmetric aqueous zinc-ion battery. Experimental measurements show that the velocity and attenuation of the ultrasonic wave on the opposing electrodes vary in the opposite senses during the cycling. While the velocity and attenuation changes can be partially reversed, a monotonic drift can also be observed with increasing number of cycles. Coupled with optical microscopy, the partially reversible oscillations can be associated with zinc stripping/plating. The irreversible drifting can be associated with the formation of ‘dead’ zinc dendrite. The technique shows clear sensitivity to the formation of dendrite, especially in the early stages (∼10 cycles) of charging and discharging processes. This work should inspire future research to enable quantitative assessment of the technique sensitivity and to improve its resolution.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced battery technologies research · Perovskite Materials and Applications · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Insights on flexible zinc-ion batteries from lab research to commercialization
2. A high-capacity and long-life aqueous rechargeable zinc battery using a metal oxide intercalation cathode10.1038/nenergy.2016.119 ↗
3. Aqueous zinc ion batteries: Focus on zinc metal anodes10.1039/D0SC00022A ↗
4. Deeply understanding the Zn anode behaviour and corresponding improvement strategies in different aqueous Zn-based batteries10.1039/D0EE02162H ↗
5. Decoupling the origins of irreversible coulombic efficiency in anode-free lithium metal batteries
6. Avoiding short circuits from zinc metal dendrites in anode by backside-plating configuration10.1038/ncomms11801 ↗
7. Operando visualization and multi-scale tomography studies of dendrite formation and dissolution in zinc batteries10.1016/j.joule.2018.11.002 ↗
8. Direct in situ observation and explanation of lithium dendrite of commercial graphite electrodes10.1039/C5RA13289D ↗
9. Direct observation of the growth of lithium dendrites on graphite anodes by operando EC-AFM10.1002/smtd.201700298 ↗
10. Spatially resolved ultrasound diagnostics of li-ion battery electrodes10.1039/C8CP07098A ↗
11. Examining the cycling behaviour of li-ion batteries using ultrasonic time-of-flight measurements
12. Correlative acoustic time-of-flight spectroscopy and X-ray imaging to investigate gas-induced delamination in lithium-ion pouch cells during thermal runaway
13. Measuring effective stiffness of Li-ion batteries: Via acoustic signal processing10.1039/D0TA05552B ↗
14. In operando acoustic detection of lithium metal plating in commercial LiCoO2/Graphite pouch cells
15. The effect of stress on battery-electrode capacity10.1149/2.0371704jes ↗
16. Energy concentration at the center of large aspect ratio rectangular waveguides at high frequencies10.1121/1.2908273 ↗
17. Compensation of phase response changes in ultrasonic transducers caused by temperature variations10.1177/1475921718759272 ↗
18. Simultaneous measurements of temperature and viscosity for viscous fluids using an ultrasonic waveguide10.3390/s21165543 ↗
19. Asymmetric behaviour of Li/Li symmetric cells for Li metal batteries10.1039/C9CC04082J ↗
20. Plating/stripping behavior of actual lithium metal anode10.1002/aenm.201902254 ↗
21. First-cycle oxidative generation of lithium nucleation sites stabilizes lithium-metal electrodes10.1002/aenm.202003674 ↗
22. Material property measurement using the quasi-scholte mode—A waveguide sensor10.1121/1.1841631 ↗
23. Instrument for simultaneous measurement of density and viscosity10.1063/1.1140325 ↗
24. Dendrite suppression by anode polishing in zinc-ion batteries10.1039/D1TA02682H ↗
25. Attenuation of Rayleigh waves due to surface roughness10.1121/10.0005271 ↗
26. Surface acoustic wave attenuation in polycrystals: Numerical modeling using a statistical digital twin of an actual sample