journal article·2022-07

Prototype design of an extended range electric sightseeing bus with an air-cooled proton exchange membrane fuel cell stack based on a voltage control logic of hydrogen purging

Lixin Fan, Zhengkai Tu, Siew Hwa Chan

Publisher page

Abstract

Range Extender (RE) is one means to enhance the driving range of battery electric vehicles by applying an electricity-generating equipment onto the vehicle. Air-cooled PEMFCs are used in some light-duty vehicle for lowering cost and simplify system. In this work, to increase system intergradation and adaptivity, an air-cooled PEMFC with a rated power of 1.1 kW is designed and fabricated. A prototype RE-FCEV with the air-cooled PEMFC serving as a sightseeing bus is designed and tested in a trial run. The PEMFC can extend the vehicle range from 40 km to 70 km. The voltage-based control logic of purging for durable operation is proposed and verified in a trial run. The effectiveness of the voltage-based control logic of purging is proved to maintain a fuel utilization of 97.84% with a sufficient voltage recovery. Based on the trial run results, the driving characteristics of three typical powertrain systems, FCEV, Hybrid battery electric vehicle (HBEV), and RE-FCEV are compared. The RE-FCEV combines the advantages of FCEV and HBEV with providing a stable output of PEMFC, decreasing the hydrogen consumption from 15.504 mol to 11.14 mol and extending the state of charge from 0.871 to 0.94 under the same operating condition.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Fuel Cells and Related Materials · Electric and Hybrid Vehicle Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. An efficient optimal sizing strategy for a hybrid electric air-ground vehicle using adaptive spiral optimization algorithm10.1016/j.jpowsour.2021.230704 ↗
2. Development of status detection method of lithium-ion rechargeable battery for hybrid electric vehicles10.1016/j.jpowsour.2020.228760 ↗
3. The state-of-the-art of power electronics converters configurations in electric vehicle technologies10.1016/j.pedc.2021.100001 ↗
4. Hybrid electric vehicle specific engines: state-of-the-art review
5. Electric vehicle multi-use: optimizing multiple value streams using mobile storage systems in a vehicle-to-grid context10.1016/j.apenergy.2021.117862 ↗
6. Key challenges for a large-scale development of battery electric vehicles: a comprehensive review10.1016/j.est.2021.103273 ↗
7. Dynamic programming for new energy vehicles based on their work modes Part II: fuel cell electric vehicles10.1016/j.jpowsour.2018.10.048 ↗
8. Experimental study on the performance of vehicle integrated thermal management system for pure electric vehicles10.1016/j.enconman.2021.115183 ↗
9. Environmental life cycle assessment of battery electric vehicles from the current and future energy mix perspective10.1016/j.jenvman.2021.114050 ↗
10. Overview of energy harvesting and emission reduction technologies in hybrid electric vehicles10.1016/j.rser.2021.111188 ↗
11. Dynamic programming for new energy vehicles based on their work modes part I: electric vehicles and hybrid electric vehicles10.1016/j.jpowsour.2018.10.047 ↗
12. PEM fuel cell as an auxiliary power unit for range extended hybrid electric vehicles10.1016/j.energy.2021.121933 ↗
13. Comparative study of energy management in parallel hybrid electric vehicles considering battery ageing
14. Co-optimization method of speed planning and energy management for fuel cell vehicles through signalized intersections10.1016/j.jpowsour.2021.230598 ↗
15. Combining a proton exchange membrane fuel cell (PEMFC) stack with a Li-ion battery to supply the power needs of a hybrid electric vehicle10.1016/j.renene.2018.06.104 ↗
16. Remodeling of a commercial plug-in battery electric vehicle to a hybrid configuration with a PEM fuel cell10.1016/j.ijhydene.2017.12.171 ↗
17. An integrated predictive energy management for light-duty range-extended plug-in fuel cell electric vehicle10.1016/j.jpowsour.2020.227780 ↗
18. Data-driven based eco-driving control for plug-in hybrid electric vehicles10.1016/j.jpowsour.2021.229916 ↗
19. On the comparison and the complementarity of batteries and fuel cells for electric driving10.1016/j.ijhydene.2014.08.077 ↗
20. Data-driven reinforcement-learning-based hierarchical energy management strategy for fuel cell/battery/ultracapacitor hybrid electric vehicles10.1016/j.jpowsour.2020.227964 ↗
21. Analysis of a HT-PEMFC range extender for a light duty full electric vehicle (LD-FEV)10.1016/j.ijhydene.2016.04.120 ↗
22. The development of a PEMFC hybrid power electric vehicle with automatic sodium borohydride hydrogen generation10.1016/j.ijhydene.2017.03.040 ↗
23. Modeling and thermal management of proton exchange membrane fuel cell for fuel cell/battery hybrid automotive vehicle10.1016/j.ijhydene.2021.10.146 ↗
24. Investigation of optimal operating temperature for the PEMFC and its tracking control for energy saving in vehicle applications10.1016/j.enconman.2021.114842 ↗
25. Progress and perspectives of integrated thermal management systems in PEM fuel cell vehicles: a review10.1016/j.rser.2021.111908 ↗
26. A comparison of temperature distribution in PEMFC with single-phase water cooling and two-phase HFE-7100 cooling methods by numerical study10.1016/j.ijhydene.2018.05.056 ↗
27. Effect of clamping pressure on liquid-cooled PEMFC stack performance considering inhomogeneous gas diffusion layer compression10.1016/j.apenergy.2019.114073 ↗
28. Thermal assessment of convective heat transfer in air- cooled PEMFC stacks: an experimental study10.1016/j.egypro.2012.09.002 ↗
29. Carbon corrosion induced fuel cell accelerated degradation warning: from mechanism to diagnosis10.1016/j.electacta.2021.138627 ↗
30. Enhancing heat dissipation to improve efficiency of two-stage electric air compressor for fuel cell vehicle10.1016/j.enconman.2021.115007 ↗
31. Fixed air flow-rate selection by considering the self-regulating function of low power air-cooled PEMFC stack10.1016/j.ijheatmasstransfer.2020.119771 ↗
32. Development and performance diagnosis of a high power air-cooled PEMFC stack10.1016/j.ijhydene.2015.12.202 ↗
33. A breakthrough hydrogen and oxygen utilization in a H2-O2 PEMFC stack with dead-ended anode and cathode10.1016/j.enconman.2021.114404 ↗
34. Quantification on degradation mechanisms of polymer exchange membrane fuel cell cathode catalyst layers during bus and stationary durability test protocols10.1016/j.jpowsour.2021.230878 ↗
35. Numerical simulation on purge strategy of proton exchange membrane fuel cell with dead-ended anode10.1016/j.energy.2021.121265 ↗
36. Advances in proton exchange membrane fuel cell with dead-end anode operation: a review10.1016/j.apenergy.2019.113416 ↗
37. Visualization study on enhancing water transport of proton exchange membrane fuel cells with a dead-ended anode by generating fluctuating flow at anode compartment10.1016/j.enconman.2020.112477 ↗
38. Experimental study on improving the dynamic characteristics of open-cathode PEMFC stack with dead-end anode by condensation and circulation of hydrogen10.1016/j.ijhydene.2020.05.108 ↗
39. Local degradation in proton exchange membrane fuel cells with dead-ended anode10.1016/j.jpowsour.2020.229021 ↗
40. Experimental study on the optimal purge duration of a proton exchange membrane fuel cell with a dead-ended anode10.1016/j.jpowsour.2016.11.039 ↗
41. Flow characteristics analysis for multi-path hydrogen supply within proton exchange membrane fuel cell stack10.1016/j.apenergy.2021.117468 ↗
42. An investigation into the effect of manifold geometry on uniformity of temperature distribution in a PEMFC stack10.1016/j.energy.2017.12.124 ↗
43. Experimental investigation on statistical characteristics of cell voltage distribution for a PEMFC stack under dynamic driving cycle10.1016/j.ijhydene.2021.09.092 ↗