An improved exponential model for charge and discharge behavior of printed supercapacitor modules under varying load conditions
Source abstract
Abstract
We report an improved and simple exponential model for the charging and discharging behavior of series-connected modules of supercapacitors under varying load conditions and over extended periods of time. In this work, only a single variable leakage resistance (VLR) with exponential current/voltage profile is used to model the effects of different self-discharge mechanisms of a supercapacitor. Due to the simplicity and accuracy of the simulations, the proposed model can be implemented in practical applications, both short-term and long-term, unlike the two-, three-branch, and exponential models with voltage/time profile reported in the literature. We have modeled four different energy modules using the electrical parameters of 12 printed supercapacitors in order to study and compare the series connected supercapacitors’ behavior in each energy module. The key parameters such as capacitance and equivalent series resistance (ESR) of supercapacitors were based on experimental results. The numerical exponential method reported here enables modelling of the nonlinear behavior of self-discharge and leakage current over a wide range of load conditions and time periods. Furthermore, we have modified the linear model reported in the literature for leakage and self-discharge and compared the results with our nonlinear model.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Energy storage technologies and real-life applications–A state of the art review10.1016/j.apenergy.2016.06.097 ↗
2. Versatile origami micro-supercapacitors array as a wind energy harvester10.1039/C8TA05148H ↗
3. Hybrid solar energy harvesting and storage devices: the promises and challenges10.1016/j.mtener.2019.04.003 ↗
4. Sweat-based wearable energy harvesting-storage hybrid textile devices10.1039/C8EE02792G ↗
5. On the Impact of mobility on battery-less RF energy harvesting system performance10.3390/s18113597 ↗
6. Advances and challenges for flexible energy storage and conversion devices and systems10.1039/c4ee00318g ↗
7. Scalable fabrication of high-power graphene micro-supercapacitors for flexible and on-chip energy storage10.1038/ncomms2446 ↗
8. Stretchable supercapacitors as emergent energy storage units for health monitoring bioelectronics10.1002/aenm.201902769 ↗
9. Energy harvesting sources, storage devices and system topologies for environmental wireless sensor networks: a review10.3390/s18082446 ↗
10. Review of power conversion and energy management for low-power, low-voltage energy harvesting powered wireless sensors10.1109/TPEL.2019.2894465 ↗
11. An experimental study of ultra-low power wireless sensor-based autonomous energy harvesting system10.1063/1.4997274 ↗
12. Charge-based supercapacitor storage estimation for indoor sub-mW photovoltaic energy harvesting powered wireless sensor nodes10.1109/TIE.2019.2896321 ↗
13. Somov · 2015
14. Building a sustainable Internet of Things: energy-efficient routing using low-power sensors will meet the need10.1109/MCE.2017.2776462 ↗
15. Ahmad · 2021 · 102783
16. Internet of things architecture: recent advances, taxonomy, requirements, and open challenges10.1109/MWC.2017.1600421 ↗
17. An autonomous wireless body area network implementation towards IoT connected healthcare applications10.1109/ACCESS.2017.2716344 ↗
18. High-performance ECC processor architecture design for IoT security applications10.1007/s11227-018-02740-2 ↗
19. A novel secure IoT-based smart home automation system using a wireless sensor network10.3390/s17010069 ↗
20. Towards the Internet of smart clothing: a review on IoT wearables and garments for creating intelligent connected e-textiles10.3390/electronics7120405 ↗
21. Toward wearable self‐charging power systems: the integration of energy‐harvesting and storage devices10.1002/smll.201702817 ↗
22. How far are we from achieving self‐powered flexible health monitoring systems: an energy perspective10.1002/aenm.202002646 ↗
23. A wearable supercapacitor based on conductive PEDOT: PSS‐coated cloth and a sweat electrolyte10.1002/adma.201907254 ↗
24. Electrochemical energy storage devices for wearable technology: a rationale for materials selection and cell design10.1039/C8CS00237A ↗
25. Advanced materials for printed wearable electrochemical devices: a review10.1002/aelm.201600260 ↗
26. Recent progress on flexible and wearable supercapacitors10.1002/smll.201701827 ↗
27. Water-transferred, inkjet-printed supercapacitors toward conformal and epidermal energy storage10.1021/acsami.9b21283 ↗
28. Recent progress in stretchable supercapacitors10.1039/C8TA03988G ↗
29. Energy harvesting sources, storage devices and system topologies for environmental wireless sensor networks: a review10.3390/s18082446 ↗
30. Supercapacitor energy storage device using biowastes: a sustainable approach to green energy10.3390/su11020414 ↗
31. Power balance control of micro gas turbine generation system based on supercapacitor energy storage10.1016/j.energy.2016.12.063 ↗
32. Review of carbon-based electrode materials for supercapacitor energy storage10.1007/s11581-019-02874-0 ↗
33. Conway · 2013
34. Lu · 2013
35. Ondřej cech, and Marie sedlaříková. "Supercapacitors: properties and applications10.1016/j.est.2018.03.012 ↗
36. Review of supercapacitors: materials and devices10.1016/j.est.2019.01.010 ↗
37. Integration of supercapacitors and batteries towards high‐performance hybrid energy storage devices10.1002/er.5954 ↗
38. Bending reliability of screen-printed vias for a flexible energy module10.1038/s41528-020-00087-4 ↗
39. Additive manufacturing of monolithic supercapacitors with biopolymer separator10.1007/s10800-020-01423-2 ↗
40. Current collectors for low resistance aqueous flexible printed supercapacitors10.1016/j.est.2020.101384 ↗
41. Where do batteries end, and supercapacitors begin?10.1126/science.1249625 ↗
42. Monolithically prepared aqueous supercapacitors10.1016/j.est.2018.02.008 ↗
43. A review of supercapacitor modeling, estimation, and applications: a control/management perspective10.1016/j.rser.2017.05.283 ↗
44. Modeling of the electrical and thermal behaviors of an ultracapacitor10.3390/en7128264 ↗
45. Electro-thermal modelling of a supercapacitor and experimental validation10.1016/j.jpowsour.2014.02.089 ↗
46. Modelling the effects of charge redistribution during self-discharge of supercapacitors10.1016/j.electacta.2010.01.002 ↗
47. Enhanced aging model for supercapacitors taking into account power cycling: application to the sizing of an energy storage system in a direct wave energy converter10.1109/TIA.2014.2369817 ↗
48. Modelling of supercapacitors based on simplified equivalent circuit10.24295/CPSSTPEA.2021.00003 ↗
49. Comparison of ultracapacitor electric circuit models
50. Classical equivalent circuit parameters for a double-layer capacitor10.1109/7.869502 ↗
51. A new parameters identification procedure for simplified double layer capacitor two-branch model10.1016/j.epsr.2009.10.024 ↗
52. Self-discharge characterization and modeling of electrochemical capacitor used for power electronics applications10.1109/TPEL.2008.2007116 ↗
53. Modeling and characterization of supercapacitors for wireless sensor network applications10.1016/j.jpowsour.2010.11.152 ↗
54. Self-discharge analysis and characterization of supercapacitors for environmentally powered wireless sensor network applications10.1016/j.jpowsour.2011.06.042 ↗
55. Ghanbari, Teymoor, Ehsan Moshksar, Sara Hamedi, Fatemeh Rezaei, and Zahra Hosseini. "Self-discharge modeling of supercapacitors using an optimal time-domain based approach." J. Power Sources 495 (2021): 229787.10.1016/j.jpowsour.2021.229787 ↗
56. Architectural modifications for flexible supercapacitor performance optimization10.1007/s13391-016-6141-y ↗
57. Asymmetric and symmetric supercapacitors based on polypyrrole and activated carbon electrodes10.1016/j.synthmet.2015.02.034 ↗
58. Keskinen · 2018
59. Monolithically prepared aqueous supercapacitors10.1016/j.est.2018.02.008 ↗
60. Non-toxic printed supercapacitors operating in sub-zero conditions10.1038/s41598-019-50570-w ↗
61. Skin-conformable printed supercapacitors and their performance in wear10.1038/s41598-020-72244-8 ↗
62. 2006