Insight into the potential strategies for mitigating Pt degradation in proton exchange membrane fuel cells (PEMFCs): From the perspective of Pt ion transport
Source abstract
Abstract
To explore the potential strategies for mitigating catalyst degradation from the perspective of Pt ion transport, here we employ a mathematical method to investigate the effects of the position of Pt band and Pt ion diffusivity in the membrane on Pt degradation under H 2 | Air conditions. Results show that promoting the Pt band away from the cathode and lowering the Pt ion diffusivity are both efficient to mitigate the total electrochemical surface area (ECSA) loss and obtain a more uniform distribution of ECSA and Pt mass after cycling, so that greatly improve the fuel cell durability. Meanwhile, an inversive transport of Pt ions from membrane to the cathode is revealed during the cathodic sweep, when the Pt band is ≥ 8 μm away from the cathode or the Pt ion diffusivity of the membrane is ≤0.4 times normal. Moreover, the limit values of mitigated ECSA loss are evaluated, which are predicted to reach about 20.8% and 10.1% by moving the Pt band toward the anode and suppressing the Pt ion diffusivity in the membrane, respectively. Accordingly, several possible strategies for mitigating Pt degradation are discussed and two main solutions are finally concluded.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions10.1016/j.pecs.2020.100859 ↗
2. Barriers of scaling-up fuel cells: cost, durability and reliability10.1016/j.energy.2014.12.007 ↗
3. Is iron involved in the lack of stability of Fe/N/C electrocatalysts used to reduce oxygen at the cathode of PEM fuel cells?10.1016/j.nanoen.2016.02.038 ↗
4. Recent advances in electrocatalysts for oxygen reduction reaction10.1021/acs.chemrev.5b00462 ↗
5. 2018
6. Impact of platinum loading on performance and degradation of polymer electrolyte fuel cell electrodes studied in a rainbow stack10.1002/fuce.201700099 ↗
7. Effect of electrode Pt-loading and cathode flow-field plate type on the degradation of PEMFC10.1016/j.jechem.2018.09.004 ↗
8. Structurally ordered intermetallic platinum–cobalt core–shell nanoparticles with enhanced activity and stability as oxygen reduction electrocatalysts10.1038/nmat3458 ↗
9. Alloy vs. intermetallic compounds: effect of the ordering on the electrocatalytic activity for oxygen reduction and the stability of low temperature fuel cell catalysts10.1016/j.apcatb.2017.05.081 ↗
10. Random alloyed versus intermetallic nanoparticles: a comparison of electrocatalytic performance10.1002/adma.201801563 ↗
11. Stabilization of platinum oxygen-reduction electrocatalysts using gold clusters10.1126/science.1134569 ↗
12. Positive effect of surface doping with Au on the stability of Pt-based electrocatalysts10.1021/acscatal.5b02883 ↗
13. Dissolution of platinum: limits for the deployment of electrochemical energy conversion?10.1002/anie.201207256 ↗
14. Voltage cycling-induced Pt degradation in proton exchange membrane fuel cells: effect of cycle profiles10.1021/acsami.0c09883 ↗
15. Record activity and stability of dealloyed bimetallic catalysts for proton exchange membrane fuel cells10.1039/C4EE02144D ↗
16. Atomic layer-by-layer deposition of Pt on Pd nanocubes for catalysts with enhanced activity and durability toward oxygen reduction10.1021/nl501205j ↗
17. Development of robust Pt shell through organic hydride donor in PtCo@Pt core-shell electrocatalysts for highly stable proton exchange membrane fuel cells10.1016/j.jcat.2019.09.020 ↗
18. Enhanced electrocatalytic performance of processed, ultrathin, supported Pd–Pt core–shell nanowire catalysts for the oxygen reduction reaction10.1021/ja111130t ↗
19. Composition-graded PdxNi1–x nanospheres with Pt monolayer shells as high-performance electrocatalysts for oxygen reduction reaction10.1021/acscatal.7b01775 ↗
20. Atomic layer deposited tantalum oxide to anchor Pt/C for a highly stable catalyst in PEMFCs10.1039/C7TA01926B ↗
21. Catalytic system based on sub-2 nm Pt particles and its extraordinary activity and durability for oxygen reduction10.1021/acs.nanolett.9b01221 ↗
22. 3D porous graphitic nanocarbon for enhancing the performance and durability of Pt catalysts: a balance between graphitization and hierarchical porosity10.1039/C9EE01899A ↗
23. Enhanced activity and durability of Pt nanoparticles supported on reduced graphene oxide for oxygen reduction catalysts of proton exchange membrane fuel cells10.1016/j.cattod.2019.11.016 ↗
24. Hexagonal boron nitride as a multifunctional support for engineering efficient electrocatalysts toward the oxygen reduction reaction10.1021/acs.nanolett.0c02782 ↗
25. Poisoning of proton exchange membrane fuel cells by contaminants and impurities: review of mechanisms, effects, and mitigation strategies10.1016/j.jpowsour.2019.03.097 ↗
26. Electrocatalysts for PEM fuel cells
27. Instability of Pt/C electrocatalysts in proton exchange membrane fuel cells - a mechanistic investigation10.1149/1.2050347 ↗
28. Effect of hydrogen and oxygen partial pressure on Pt precipitation within the membrane of PEMFCs10.1149/1.2764240 ↗
29. Platinum dissolution and deposition in the polymer electrolyte membrane of a PEM fuel cell as studied by potential cycling10.1039/B514342J ↗
30. The effect of dissolution, migration and precipitation of platinum in Nafion®-based membrane electrode assemblies during fuel cell operation at high potential10.1016/j.jpowsour.2008.06.098 ↗
31. PEM fuel cell Pt∕C dissolution and deposition in Nafion electrolyte10.1149/1.2712796 ↗
32. Effects of crossover hydrogen on platinum dissolution and agglomeration10.1016/j.jpowsour.2011.05.034 ↗
33. The effect of humidity and oxygen partial pressure on degradation of Pt/C catalyst in PEM fuel cell10.1016/j.electacta.2008.10.008 ↗
34. Effects of operating conditions on durability of polymer electrolyte membrane fuel cell Pt cathode catalyst layer10.1016/j.jpowsour.2010.12.068 ↗
35. Cathode loading impact on voltage cycling induced PEMFC degradation: a voltage loss analysis10.1149/2.0161806jes ↗
36. Surface platinum electrooxidation in the presence of oxygen10.1021/jp211490a ↗
37. Application of Pt nanoparticle dissolution and oxidation modeling to understanding degradation in PEM fuel cells10.1149/2.011204jes ↗
38. Mathematical model of platinum movement in PEM fuel cells10.1149/1.1836156 ↗
39. A one-dimensional Pt degradation model for polymer electrolyte fuel cells10.1149/2.0101508jes ↗
40. Modeling of PEM fuel cell Pt/C catalyst degradation10.1016/j.jpowsour.2007.12.007 ↗
41. Measurement of catalyst layer electrolyte resistance in PEFCs using electrochemical impedance spectroscopy10.1149/1.1888367 ↗
42. Proton conduction and oxygen reduction kinetics in PEM fuel cell cathodes: effects of ionomer-to-carbon ratio and relative humidity10.1149/1.3143965 ↗
43. The Dynamics of platinum precipitation in an ion exchange membrane10.1149/1.3532956 ↗
44. The potential of catalytic particle in ion exchange membrane10.1016/j.jelechem.2006.11.010 ↗
45. Modeling the local potential at Pt nanoparticles in polymer electrolyte membranes10.1039/C5CP00376H ↗
46. Modelling analysis of low platinum polymer fuel cell degradation under voltage cycling: gradient catalyst layers with improved durability10.1016/j.jpowsour.2018.09.092 ↗
47. Design of gradient cathode catalyst layer (CCL) structure for mitigating Pt degradation in proton exchange membrane fuel cells (PEMFCs) using mathematical method10.1016/j.jpowsour.2020.227729 ↗
48. Load cycle durability of a graphitized carbon black-supported platinum catalyst in polymer electrolyte fuel cell cathodes10.1016/j.jpowsour.2016.05.117 ↗
49. Catalyst degradation in fuel cell electrodes: accelerated stress tests and model-based analysis10.1016/j.electacta.2015.03.152 ↗
50. Systematic study on the impact of Pt particle size and operating conditions on PEMFC cathode catalyst durability10.1149/2.081111jes ↗
51. Investigation of platinum oxidation in PEM fuel cells at various relative humidities
52. Dynamics of particle growth and electrochemical surface area loss due to platinum dissolution10.1149/2.051403jes ↗
53. The effect of hydrogen crossover on open-circuit voltage in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2009.10.023 ↗
54. Review of hydrogen crossover through the polymer electrolyte membrane10.1016/j.ijhydene.2021.04.050 ↗
55. Pt nanoparticle stability in PEM fuel cells: influence of particle size distribution and crossover hydrogen10.1039/b821622n ↗
56. Modelling the performance of the cathode catalyst layer of polymer electrolyte fuel cells10.1016/S0022-0728(98)00214-9 ↗
57. Oxygen-enhanced dissolution of platinum in acidic electrochemical environments10.1021/jp201959h ↗
58. Durability test of PEMFC with Pt-PFSA composite membrane10.1016/j.ijhydene.2011.03.094 ↗
59. Preparation of Pt/zeolite–Nafion composite membranes for self-humidifying polymer electrolyte fuel cells10.1016/j.jpowsour.2006.11.090 ↗
60. Pt/CNTs-Nafion reinforced and self-humidifying composite membrane for PEMFC applications10.1016/j.jpowsour.2006.09.065 ↗
61. Favorable effect of in-situ generated platinum in the membrane on fuel cell membrane durability10.1016/j.jpowsour.2015.08.096 ↗