journal article·2021-09

Environmental temperature effects on the energy flow of plug-in hybrid electric vehicles

Yan Zhang, Xiayi Yuan, Lian Duan, Yanghui Xu, Fengchong Lan

Publisher page

Abstract

Abstract The fuel consumption and efficiency properties of plug-in hybrid electric vehicles (PHEVs), which are becoming the most important means of transportation instead of fuel vehicles, are affected by component energy consumption in the power transmission process, causing global resources to be gradually wasted. To understand the influence of environmental temperature on steady-state and transient vehicle energy transmissions at different states of charge (SOCs), a complete energy flow test platform is designed, constructed and thoroughly explored to analyze the energy flow at different temperatures. These tests are carried out in a climate chamber to simulate real vehicle behavior with air conditioning on. The experimental results show that the engine efficiency is not relevant to the SOC. Moreover, it is found that the proportion of the total engine heat loss to the fuel energy is basically the same for all working conditions. However, the coolant loss ratio decreased with increasing SOCs. In addition, at a low SOC, the ratio of controller heat loss is not related to the increase in temperature. However, at a high SOC, this controller heat loss increases by 30 times. Therefore, the SOC is the major factor that affects generator loss.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electric and Hybrid Vehicle Technologies · Electric Vehicles and Infrastructure · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Design and performance investigation of a biogas fueled combined cooling and power generation system10.1016/j.enconman.2018.05.026 ↗
2. Review of organic Rankine cycles for internal combustion engine exhaust waste heat recovery10.1016/j.applthermaleng.2012.10.017 ↗
3. Advanced transient simulation on hybrid vehicle using rankine cycle system10.4271/2008-01-0310 ↗
4. Chammas · 2005
5. A review of energy sources and energy management system in electric vehicles10.1016/j.rser.2012.11.077 ↗
6. Empirical fuel consumption and CO2 emissions of plug‐in hybrid electric vehicles10.1111/jiec.12623 ↗
7. Böhme · 2017
8. Fuzzy-logic-based control applied to a hybrid electric vehicle with four separate wheel drives10.1049/ip-cta:20040066 ↗
9. Plug-in hybrid electric vehicle charge pattern optimization for energy cost and battery longevity10.1016/j.jpowsour.2010.07.001 ↗
10. Rule based energy management strategy for a series-parallel plug-in hybrid electric bus optimized by dynamic programming10.1016/j.apenergy.2015.12.031 ↗
11. Performance of plug-in hybrid electric vehicle under low temperature condition and economy analysis of battery pre-heating10.1016/j.jpowsour.2018.08.093 ↗
12. The Effects of Pressure and temperature on the process of auto-ignition and combustion of rape oil and its mixtures
13. Quantifying vehicle emission factors for various ambient conditions using an on-road, real-time emissions system
14. Laurikko · 1995
15. Gurney · 1989
16. Larson · 1989
17. Optimal performance and emissions of diesel/hydrogen-rich gas engine varying intake air temperature and EGR ratio10.1016/j.applthermaleng.2017.06.026 ↗
18. Numerical study of engine parameters on combustion and performance characteristics in an n-heptane fueled HCCI engine10.1016/j.applthermaleng.2017.09.121 ↗
19. Effects of intake temperature on the combustion characteristics of HCCI engine fueled with n-butanol
20. Song · 2012
21. Effect of high temperature environment on the performance of LiNi0.5Co0.2Mn0.3O2 battery10.1016/j.ijheatmasstransfer.2016.09.005 ↗
22. Investigation of impact test of power battery under different environment temperatures10.4028/www.scientific.net/AMM.229-231.1064 ↗
23. Temperature effects on torque production and efficiency of PM motors using NdFeB magnets10.1109/28.370284 ↗
24. Temperature rise calculation of high speed PM machine based on thermal-circuit method and 3D fluid field method
25. Giulii Capponi · 2006 · 38
26. Force density limits in low-speed PM machines due to temperature and Reactance10.1109/TEC.2004.832059 ↗
27. Online multiparameter estimation of nonsalient PM synchronous machines with temperature variation tracking10.1109/TIE.2010.2054055 ↗
28. Experimental analysis of the global energy balance in a DI diesel engine10.1016/j.applthermaleng.2015.06.005 ↗
29. Theoretical and experimental investigations on energy balance on DMDF engine10.1016/j.fuel.2015.10.024 ↗
30. Energy balance of internal combustion engines using alternative fuels10.1016/j.rser.2013.05.049 ↗
31. Experimental study on the energy flow of a gasoline-powered vehicle under the NEDC of cold starting10.1016/j.applthermaleng.2016.10.002 ↗
32. Evaluation of energy consumption, emissions and cost of plug-in hybrid vehicles10.1016/j.enconman.2009.03.036 ↗
33. Energy conversion phenomena in plug-in hybrid-electric vehicles10.1016/j.enconman.2011.01.025 ↗
34. Feasibility study on combined use of residential SOFC cogeneration system and plug-in hybrid electric vehicle from energy-saving viewpoint10.1016/j.enconman.2012.01.021 ↗
35. Prediction of performance, combustion and emission characteristics for a CI engine at varying injection pressures10.1016/j.energy.2020.117257 ↗
36. Comparative performance and emissions assessments of a single-cylinder diesel engine using artificial neural network and thermodynamic simulation[J]