journal article·2021-09Open access

Alumina-flame retardant separators toward safe high voltage Li-Ion batteries

Nicolas Delaporte, Alexis Perea, Andrea Paolella, Joël Dubé, Marie-Josée Vigeant, Hendrix Demers, Daniel Clément, Wen Zhu, Vincent Gariépy, Karim Zaghib

Abstract

Abstract In this work, we reported the easy incorporation of high amount of flame retardants in Li-ion batteries without affecting the electrochemical performance through grafting on alumina surface. The strategy consisted to firstly graft halogen- and phosphorus-based molecules on Al2O3 surface and then to incorporate the modified ceramics in the porosity of a thermally stable cellulose separator. The final composite separator was analyzed by thermogravimetric and flame test analyses. The results revealed that the use of flame retardant ceramics in the cellulose matrix was an effective method to increase the thermal stability of the separator and slow down and even avoid its combustion. The electrochemical performance of NMC/graphite Li-ion batteries assembled with the various cellulose separators were similar and even slightly better than those obtained for the cell made with a Celgard separator.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Flame retardant materials and properties · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Safety issues in lithium ion batteries: materials and cell design10.3389/fenrg.2019.00065 ↗
2. Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy10.1021/am506712c ↗
3. A review of international abuse testing standards and regulations for lithium ion batteries in electric and hybrid electric vehicles10.1016/j.rser.2017.05.195 ↗
4. Safety focused modeling of lithium-ion batteries: a review10.1016/j.jpowsour.2015.11.100 ↗
5. Cathode materials modified by surface coating for lithium ion batteries10.1016/j.electacta.2005.11.015 ↗
6. Effects of additives on thermal stability of Li ion cells10.1016/j.jpowsour.2005.03.170 ↗
7. Recent advances for flame retardancy of textiles based on phosphorus chemistry10.3390/polym8090319 ↗
8. Flame retardation by phosphorus compounds10.1021/ar50125a001 ↗
9. Comparable investigation of tervalent and pentavalent phosphorus based flame retardants on improving the safety and capacity of lithium-ion batteries10.1016/j.jpowsour.2019.02.037 ↗
10. Comparative study of trimethyl phosphite and trimethyl phosphate as electrolyte additives in lithium ion batteries10.1016/j.jpowsour.2004.11.042 ↗
11. Microencapsulating inorganic and organic flame retardants for the safety improvement of lithium-ion batteries10.1016/j.ssi.2018.05.013 ↗
12. Encapsulation of flame retardants for application in lithium-ion batteries10.1016/j.jpowsour.2016.11.026 ↗
13. An aqueous inorganic polymer binder for high performance lithium–sulfur batteries with flame-retardant properties10.1021/acscentsci.7b00569 ↗
14. Thermomechanical analysis and durability of commercial micro-porous polymer Li-ion battery separators10.1016/j.jpowsour.2010.10.083 ↗
15. Electrospun core-shell microfiber separator with thermal-triggered flame-retardant properties for lithium-ion batteries10.1126/sciadv.1601978 ↗
16. Novel ceramic-grafted separator with highly thermal stability for safe lithium-ion batteries10.1021/acsami.7b05535 ↗
17. A high-temperature stable ceramic-coated separator prepared with polyimide binder/Al2O3 particles for lithium-ion batteries10.1016/j.memsci.2016.06.035 ↗
18. Functionalization of graphene sheets by the diazonium chemistry during electrochemical exfoliation of graphite10.1016/j.carbon.2016.09.063 ↗
19. Influence of deposition temperature of thermal ALD deposited Al2O3 films on silicon surface passivation10.1063/1.4922267 ↗
20. Functionalization of the carbon additive of a high-voltage Li-ion cathode10.1039/C8TA07236A ↗
21. Synthesis of binder-like molecules covalently linked to silicon nanoparticles and application as anode material for lithium-ion batteries without the use of electrolyte additives10.1016/j.jpowsour.2017.01.135 ↗
22. Characterization of the deposition of organic molecules at the surface of gold by the electrochemical reduction of aryldiazonium cations10.1021/la047369c ↗
23. Functionalization of aluminum nanoparticles using a combination of aryl diazonium salt chemistry and iniferter method10.1021/jp406356s ↗
24. Surface modification of conducting substrates. Existence of azo bonds in the structure of organic layers obtained from diazonium salts10.1021/cm0700551 ↗
25. Chemically grafted carbon-coated LiFePO4 using diazonium chemistry10.1016/j.jpowsour.2015.01.014 ↗
26. Silanization of oxidized silicon and aluminum surfaces with functionalized silanes with characterization by wettability, ellipsometry, XPS and quartz crystal microbalance studies10.1016/0166-6622(92)80062-7 ↗
27. Hollow porous SiO 2 nanocubes towards high-performance anodes for lithium-ion batteries10.1038/srep01568 ↗
28. In situ formation of bromobenzene diazonium ions and their spontaneous reaction with carbon-coated LiFePO4 in organic media10.1039/C6NJ00132G ↗
29. Increasing the affinity between carbon-coated LiFePO4/C electrodes and conventional organic electrolyte by spontaneous grafting of a benzene-trifluoromethylsulfonimide moiety10.1021/acsami.5b06184 ↗
30. Nature of the use of adventitious carbon as a binding energy standard10.1116/1.579868 ↗
31. Grafting of an aluminium surface with organic layers10.1039/C6RA15313E ↗
32. Syndiotactic polystyrene-based ionogel membranes for high temperature electrochemical applications10.1021/acsami.7b09155 ↗
33. An electrochemically compatible and flame-retardant electrolyte additive for safe lithium ion batteries10.1016/j.jpowsour.2012.11.018 ↗
34. The intrinsic kinetics and heats of reactions for cellulose pyrolysis and char formation10.1002/cssc.201000119 ↗
35. Flammability of cellulose-based fibers and the effect of structure of phosphorus compounds on their flame retardancy10.3390/polym8080293 ↗
36. Effect of the polymorphs of cellulose on its pyrolysis kinetic and char yield10.1016/j.jaap.2017.08.002 ↗
37. Grafting of phosphorus flame retardants on flax fabrics: comparison between two routes10.1016/j.polymdegradstab.2017.11.006 ↗
38. Flammability of Li-ion battery electrolytes: flash point and self-extinguishing time measurements10.1149/2.0121502jes ↗
39. Toward low-cost all-organic and biodegradable Li-ion batteries10.1038/s41598-020-60633-y ↗
40. Design of electrolyte solutions for Li and Li-ion batteries: a review10.1016/j.electacta.2004.01.090 ↗
41. Effect of Al2O3 coating on stabilizing LiNi0.4Mn0.4Co0.2O2 cathodes10.1021/acs.chemmater.5b02952 ↗
42. ALD-modified LiNi0.33Mn0.33Co0.33O2 paired with macroporous silicon for lithium-ion batteries: an investigation on lithium trapping, resistance rise, and cycle-life performance10.1021/acsaem.9b01728 ↗
43. Protection of LiFePO4 against moisture10.3390/ma13040942 ↗
44. Attachment of redox active molecules on the carbon additive and its effect on the cycling performance of LiFePO4 electrodes10.1016/j.matchemphys.2019.121739 ↗
45. Investigation into the fire hazards of lithium-ion batteries under overcharging10.3390/app7121314 ↗
46. High voltage LiNi0.5Mn0.3Co0.2O2/graphite cell cycled at 4.6 V with a FEC/HFDEC-Based electrolyte10.1002/aenm.201700109 ↗
47. Correlation of electrolyte volume and electrochemical performance in lithium-ion pouch cells with graphite anodes and NMC532 cathodes10.1149/2.1131706jes ↗
48. Impedance characterization of an LCO-NMC/graphite cell: ohmic conduction, SEI transport and charge-transfer phenomenon10.3390/batteries4030043 ↗
49. Functionality selection principle for high voltage lithium-ion battery electrolyte additives10.1021/acsami.7b08953 ↗
50. Electrolyte volume effects on electrochemical performance and solid electrolyte interphase in Si-graphite/NMC lithium-ion pouch cells10.1021/acsami.7b03617 ↗
51. Long-term lithium-ion battery performance improvement via ultraviolet light treatment of the graphite anode10.1149/2.0171614jes ↗
52. Multi-carbonyl molecules immobilized on high surface area carbon by diazonium chemistry for energy storage applications10.1016/j.electacta.2019.04.012 ↗
53. Delaporte · 2020