An operation strategy for mitigating the degradation of solid oxide electrolysis cells for syngas production
Source abstract
Abstract
Three cells were tested under different conditions to mimic the situation with stacks arranged in gas flow series or parallel. The effects of reactant conversion ratio and inlet gas composition on the cell performance and durability were studied. The cells were operated under −1 A/cm 2 at 800 °C for H 2 O + CO 2 co-electrolysis. Flows were adjusted to realize the same overall production of syngas . Detailed electrochemical characterization was performed before, during and after the aging test and microstructural changes after aging were investigated. The results show that a gas-flow series arrangement is advantageous as it leads to reduced cell degradation: Reducing the H 2 O + CO 2 conversion from 56% of a gas flow “parallel” case (Cell P) to 28% in the upstream of the series connected cells (Cell SU) and 39% in the downstream one (Cell SD) reduces the overall cell voltage degradation rate from 372 mV/kh for Cell P to140 mV/kh and 69 mV/kh for Cells SU and SD, respectively. This is tentatively ascribed to the “milder” overall conditions realized in the gas flow series case, where the average as well as maximum polarization (and local current density) is reduced relative to the parallel flow case.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Molten salt chemistry and electrochemical processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Biogas upgrading using SOEC with a Ni-ScYSZ electrode10.1149/05701.3217ecst ↗
2. Recycling of carbon dioxide to methanol and derived products – closing the loop10.1039/C4CS00122B ↗
3. Carbon dioxide recycling by high temperature Co-electrolysis and hydrocarbon synthesis10.1149/1.2921588 ↗
4. A review and comprehensive analysis of degradation mechanisms of solid oxide electrolysis cells10.1016/j.ijhydene.2013.09.045 ↗
5. Degradation issues in solid oxide cells during high temperature electrolysis10.1115/1.4003787 ↗
6. Degradation mechanism of electrolyte and air electrode in solid oxide electrolysis cells operating at high polarization10.1016/j.ijhydene.2012.10.113 ↗
7. Degradation phenomena in a solid oxide electrolysis cell after 9000 h of operation10.1016/j.jpowsour.2012.09.061 ↗
8. Durability of solid oxide electrolysis cells for syngas production10.1149/2.106309jes ↗
9. Failure mechanism of (La,Sr)MnO3 oxygen electrodes of solid oxide electrolysis cells10.1016/j.ijhydene.2011.05.103 ↗
10. Solid oxide electrolysis cells: degradation at high current densities10.1149/1.3447752 ↗
11. Understanding the processes governing performance and durability of solid oxide electrolysis cells10.1039/C5FD00032G ↗
12. Degradation in solid oxide electrolysis cells during long term testing10.1002/fuce.201900081 ↗
13. Conditions for stable operation of solid oxide electrolysis cells: oxygen electrode effects10.1039/C9EE01664C ↗
14. Re-activation of degraded nickel cermet anodes - nano-particle formation via reverse current pulses10.1016/j.jpowsour.2017.11.088 ↗
15. Reactivating the Ni-YSZ electrode in solid oxide cells and stacks by infiltration10.1016/j.jpowsour.2018.01.021 ↗
16. Eliminating degradation in solid oxide electrochemical cells by reversible operation10.1038/nmat4165 ↗
17. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
18. Degradation of solid oxide electrolysis cells: phenomena, mechanisms, and emerging mitigation strategies—a review10.1016/j.jmst.2019.07.026 ↗
19. Review-materials degradation of solid oxide electrolysis cells10.1149/2.0101611jes ↗
20. Performance and stability of (La,Sr)MnO3–Y2O3–ZrO2 composite oxygen electrodes under solid oxide electrolysis cell operation conditions10.1016/j.ijhydene.2012.04.073 ↗
21. Performance and durability of solid oxide electrolysis cells for syngas production10.1149/1.3702414 ↗
22. Life time performance characterization of solid oxide electrolysis cells for hydrogen production10.1149/06801.3359ecst ↗
23. Origin of polarization losses in solid oxide electrolysis cells under high current density10.1149/1.3501097 ↗
24. Mechanism of oxygen electrode delamination in solid oxide electrolyzer cells10.1016/j.ijhydene.2010.06.058 ↗
25. Fermi potential across working solid oxide cells with zirconia or ceria electrolytes10.1149/06101.0203ecst ↗
26. Influence of the oxygen electrode and inter-diffusion barrier on the degradation of solid oxide electrolysis cells10.1016/j.jpowsour.2012.08.063 ↗
27. Electrochemical performance and preliminary post-mortem analysis of a solid oxide cell stack with 20,000 h of operation10.1149/2.0541802jes ↗
28. 3D microstructural characterization of Ni/YSZ electrodes exposed to 1 Year of electrolysis testing10.1149/2.1281902jes ↗
29. Degradation of Ni-YSZ electrodes in solid oxide cells: impact of polarization and initial microstructure on the Ni evolution10.1149/2.1261915jes ↗
30. Microstructural degradation of Ni/YSZ electrodes in solid oxide electrolysis cells under high current10.1149/2.098308jes ↗
31. Comparison of microstructural evolution of fuel electrodes in solid oxide fuel cells and electrolysis cells10.1016/j.jpowsour.2019.227599 ↗
32. TOF-SIMS characterization of impurity enrichment and redistribution in solid oxide electrolysis cells during operation10.1039/C4DT01053A ↗
33. The effect of SO2 on the Ni-YSZ electrode of a solid oxide electrolyzer cell operated in co-electrolysis10.1088/2515-7655/ab8b55 ↗
34. Carbon deposition and sulfur poisoning during CO2 electrolysis in nickel-based solid oxide cell electrodes10.1016/j.jpowsour.2017.10.097 ↗
35. Poisoning of solid oxide electrolysis cells by impurities10.1149/1.3464804 ↗
36. Long-term tests of a Jülich planar short stack with reversible solid oxide cells in both fuel cell and electrolysis modes10.1016/j.ijhydene.2013.01.192 ↗
37. Enhanced performance and durability of a high temperature steam electrolysis stack10.1002/fuce.201200199 ↗
38. Carbon nanotube growth on nanozirconia under strong cathodic polarization in steam and carbon dioxide10.1002/cctc.201300941 ↗
39. Properties and performance of SOFCs produced on a pre-pilot plant scale10.1002/fuce.200500108 ↗
40. Production of synthetic fuels by Co-electrolysis of steam and carbon dioxide10.1080/15435070903372577 ↗
41. Ebbesen · 2013
42. Accurate predictions of H2O and CO2 co-electrolysis outlet compositions in operation10.1016/j.ijhydene.2015.01.031 ↗
43. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
44. Study of solid oxide electrolysis cells operated in potentiostatic mode: effect of operating temperature on durability10.1016/j.cej.2021.129260 ↗
45. Durability of high performance Ni–yttria stabilized zirconia supported solid oxide electrolysis cells at high current density10.1016/j.jpowsour.2014.03.133 ↗
46. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
47. Production of synthesis gas (H2 and CO) by high-temperature Co-electrolysis of H2O and CO210.1016/j.ijhydene.2015.06.034 ↗
48. 2017
49. Jensen · 2006
50. Relation between Ni particle shape change and Ni migration in Ni–YSZ electrodes – a hypothesis10.1002/fuce.201600222 ↗
51. Post-test analysis on a solid oxide cell stack operated for 10,700 hours in steam electrolysis mode10.1002/fuce.201600194 ↗