journal article·2021-07Open access

Two-dimensional vermiculite nanosheets-modified porous membrane for non-aqueous redox flow batteries

Tao Liu, Cuijuan Zhang, Jiashu Yuan, Yihan Zhen, Yongdan Li

Abstract

Abstract The non-aqueous redox flow batteries (NARFBs) are promising for large-scale energy storage. However, the crossover contamination of active materials seriously imparts the performance. Here, two-dimensional (2D) vermiculite nanosheets modified Celgard porous membrane is prepared by the filtration method. The 2D vermiculite nanosheet layers stacked on the surface of Celgard membrane effectively reduce the crossover effect by sieving electrolytes and active materials through the nanoscale intercalation channels. Furthermore, the surface-governed transport behavior of the 2D vermiculite nanosheets is conducive to the exchange of supporting electrolyte. The resultant NARFB with the modified membrane exhibits higher Coulombic efficiency (95.3% vs. 87.6%) and larger discharge capacity (0.104 vs. 0.093 Ah L−1) without obvious impact on voltage efficiency (90.1% vs. 90.5%) at 2 mA cm−2. This work provides an efficient strategy to alleviate the crossover effect in NARFBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Redox flow cells for energy conversion10.1016/j.jpowsour.2006.02.095 ↗
2. Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage10.1039/C8EE01419A ↗
3. Molecular engineering of organic electroactive materials for redox flow batteries10.1039/C7CS00569E ↗
4. Electrochemical properties of an all-organic redox flow battery using 2,2,6,6-tetramethyl-1-piperidinyloxy and N-methylphthalimide10.1149/2.012112esl ↗
5. A high-performance all-iron non-aqueous redox flow battery10.1016/j.jpowsour.2019.227331 ↗
6. Structural effects of anion exchange composite membranes in non-aqueous redox flow batteries10.1016/j.memsci.2018.07.061 ↗
7. Enhancing the performance of an all-organic non-aqueous redox flow battery10.1016/j.jpowsour.2019.227283 ↗
8. Highly concentrated phthalimide-based anolytes for organic redox flow batteries with enhanced reversibility10.1016/j.chempr.2018.08.024 ↗
9. Ferrocene/anthraquinone based bi-redox molecule for symmetric nonaqueous redox flow battery10.1016/j.jpowsour.2020.229132 ↗
10. Macromolecular design strategies for preventing active-material crossover in non-aqueous all-organic redox-flow batteries10.1002/anie.201610582 ↗
11. The use of polybenzimidazole membranes in vanadium redox flow batteries leading to increased coulombic efficiency and cycling performance10.1016/j.electacta.2014.11.185 ↗
12. Elucidating effects of component materials and flow fields on Sn-Fe hybrid flow battery performance10.1016/j.jpowsour.2019.227613 ↗
13. Performance of a vanadium redox flow battery with a VANADion membrane10.1016/j.apenergy.2016.08.001 ↗
14. Recent development of membrane for vanadium redox flow battery applications: a review10.1016/j.apenergy.2018.12.087 ↗
15. Investigation of local environments in Nafion-SiO2 composite membranes used in vanadium redox flow batteries10.1016/j.ssnmr.2011.11.005 ↗
16. Highly efficient and low cost SPEEK/TiO2 nanocomposite membrane for vanadium redox flow battery10.1166/jnn.2019.16467 ↗
17. Design and synthesis of highly stable poly(tetrafluoroethylene)-zirconium phosphate (PTFE-ZrP) ion-exchange membrane for vanadium redox flow battery (VRFB)10.1007/s11581-016-1967-8 ↗
18. A zeolite ion exchange membrane for redox flow batteries10.1039/c3cc47214k ↗
19. An atlas of two-dimensional materials10.1039/C4CS00102H ↗
20. Construction of a 2D/2D g-C3N4/rGO hybrid heterojunction catalyst with outstanding charge separation ability and nitrogen photofixation performance via a surface protonation process10.1039/C5RA28123G ↗
21. Sulfonated polyimide/s-MoS2 composite membrane with high proton selectivity and good stability for vanadium redox flow battery10.1016/j.memsci.2015.04.053 ↗
22. Branched sulfonated polyimide/functionalized silicon carbide composite membranes with improved chemical stabilities and proton selectivities for vanadium redox flow battery application
23. Sandwiching h-BN monolayer films between sulfonated poly(ether ether ketone) and Nafion for proton exchange membranes with improved ion selectivity
24. Enhanced membrane ion selectivity by incorporating graphene oxide nanosheet for vanadium redox flow battery application10.1016/j.electacta.2017.07.122 ↗
25. SPEEK/graphene oxide nanocomposite membranes with superior cyclability for highly efficient vanadium redox flow battery10.1039/C4TA02124J ↗
26. A recast Nafion/graphene oxide composite membrane for advanced vanadium redox flow batteries10.1039/C5RA24317C ↗
27. Sulfonated graphene oxide-decorated block copolymer as a proton-exchange membrane: improving the ion selectivity for all-vanadium redox flow batteries10.1039/C8TA06717A ↗
28. Sub-5 nm graphene oxide nanofilm with exceptionally high H+/V selectivity for vanadium redox flow battery10.1021/acsaem.9b00474 ↗
29. Graphene enhances the proton selectivity of porous membrane in vanadium flow batteries10.1016/j.matdes.2016.10.019 ↗
30. Pore-Size-Tuned graphene oxide frameworks as ion-selective and protective layers on hydrocarbon membranes for vanadium redox-flow batteries10.1021/acs.nanolett.8b01429 ↗
31. Two-Dimensional metal-organic framework nanosheets-modified porous separator for non-aqueous redox flow batteries10.1016/j.memsci.2020.118463 ↗
32. Exfoliation and characterization of layered silicate minerals: a review10.1142/S0218625X14300019 ↗
33. Microwave exfoliation of vermiculite and phlogopite10.1346/CCMN.2003.0510412 ↗
34. Characterization and boron adsorption capacity of vermiculite modified by thermal shock or H2O2 reaction and/or sonication10.1016/j.clay.2010.03.004 ↗
35. Chemical exfoliation of vermiculite and the production of colloidal dispersions10.1126/science.156.3773.385 ↗
36. Self-Assembled two-dimensional nanofluidic proton channels with high thermal stability10.1038/ncomms8602 ↗
37. Simultaneously enhancing the thermal stability, mechanical modulus, and electrochemical performance of solid polymer electrolytes by incorporating 2D sheets10.1002/aenm.201800866 ↗
38. Two-Dimensional vermiculite separator for lithium sulfur batteries10.1016/j.cclet.2017.09.065 ↗
39. Towards high-performance nonaqueous redox flow electrolyte via ionic modification of active species10.1002/aenm.201400678 ↗
40. Triethylammonium bis(tetrafluoromethylsulfonyl)amide protic ionic liquid as an electrolyte for electrical double-layer capacitors10.1039/c2cp40315c ↗
41. Sulfonated poly(ether ether ketone)/sulfonated graphene oxide hybrid membrane for vanadium redox flow battery10.1016/j.electacta.2018.06.083 ↗
42. X-Ray diffraction studies of the thermal behaviour of commercial vermiculites10.1016/j.clay.2008.03.004 ↗
43. Interlayer forces in montmorillonite and vermiculite10.2136/sssaj1969.03615995003300020017x ↗
44. Lithium ion-selective membrane with 2D subnanometer channels10.1016/j.watres.2019.05.018 ↗
45. Mobility and ionic association of lithium and quaternary ammonium salts in propylene carbonate and γ‐butyrolactone10.1149/1.2059336 ↗
46. Crystal structure of tris(acetylacetonato)iron(III), C15H21O6Fe, at 20 K
47. Diffusional motion of redox centers in carbonate electrolytes10.1063/1.4894481 ↗
48. Surface-Modified porous membranes with electrospun Nafion/PVA fibres for non-aqueous redox flow battery10.1016/j.memsci.2016.04.068 ↗
49. Novel composite membrane coated with a poly(diallyldimethylammonium chloride)/urushi semi-interpenetrating polymer network for non-aqueous redox flow battery application10.1016/j.jpowsour.2016.10.020 ↗
50. Highly selective composite membranes using ladder-like structured polysilsesquioxane for a non-aqueous redox flow battery10.1016/j.memsci.2019.117520 ↗
51. Fabrication of a composite anion exchange membrane with aligned ion channels for a high-performance non-aqueous vanadium redox flow battery10.1039/C9RA08616A ↗
52. Gradient-Distributed metal-organic framework-based porous membranes for nonaqueous redox flow batteries10.1002/aenm.201802533 ↗