Effect of fibrillated fiber morphology on properties of paper-based separators for lithium-ion battery applications
Source abstract
Abstract
Abstract The effect of the morphology of Lyocell fibrillated fibers with different beating revolutions on pore structure and electrochemical properties of Lyocell fibrillated fiber paper-based (LF) separators for lithium-ion batteries is investigated. With raising the beating revolutions from 50,000 to 600,000, the number of coarse fibers decreases from 7851 to 743, and the mean fiber diameter decreases from 374 nm to 171 nm. Both the number of coarse fibers and the mean fiber diameter have good correlation with the thickness, pore size and porosity of the LF separators. The risk of battery short circuit is increased, if the mean pore size of separators is larger than the minimum size of cathode particles. Compared to the PE and PI separators, the LF separators deliver excellent cycle performance with different current densities at 30 °C owing to their larger pore size, porosity, and better electrolyte affinity. However, the cycle performance deteriorates at −10 °C due to the severe local lithium plating on the graphite surface caused by a large number of coarse fibers with a diameter ranging from 5 μm to 15 μm as local microscopic defects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Thermal runaway of lithium-ion batteries without internal short circuit10.1016/j.joule.2018.06.015 ↗
2. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
3. Experimental study on thermal runaway risk of 18650 lithium ion battery under side-heating condition10.1016/j.jlp.2019.06.012 ↗
4. Recent development in separators for high-temperature lithium-ion batteries10.1002/smll.201901689 ↗
5. Nanoporous polymer scaffold-embedded nonwoven composite separator membranes for high-rate lithium-ion batteries10.1039/C4RA07994A ↗
6. In situ welding: superb strength, good wettability and fire resistance tri-layer separator with shutdown function for high-safety lithium ion battery10.1016/j.memsci.2019.117509 ↗
7. A review of recent developments in membrane separators for rechargeable lithium-ion batteries10.1039/C4EE01432D ↗
8. Progress in polymeric separators for lithium ion batteries10.1039/C5RA14087K ↗
9. Recent advances on separator membranes for lithium-ion battery applications: from porous membranes to solid electrolytes10.1016/j.ensm.2019.07.024 ↗
10. Recent developments of cellulose materials for lithium-ion battery separators10.1007/s10570-017-1421-8 ↗
11. Performance evaluation of a non-woven lithium ion battery separator prepared through a paper-making process10.1016/j.jpowsour.2014.01.080 ↗
12. A paper-supported inorganic composite separator for high-safety lithium-ion batteries10.1016/j.memsci.2018.02.040 ↗
13. TEMPO-oxidized bacterial cellulose nanofiber membranes as high-performance separators for lithium-ion batteries10.1016/j.carbpol.2019.115570 ↗
14. Eco-friendly cellulose nanofiber paper-derived separator membranes featuring tunable nanoporous network channels for lithium-ion batteries10.1039/c2jm32415f ↗
15. Ultra-light cellulose nanofibril membrane for lithium-ion batteries10.1016/j.memsci.2019.117550 ↗
16. Particle size-dependent, tunable porous structure of a SiO2/poly(vinylidene fluoride-hexafluoropropylene)-coated poly(ethylene terephthalate) nonwoven composite separator for a lithium-ion battery10.1039/c1jm12246k ↗
17. Al2O3/poly(ethylene terephthalate) composite separator for high-safety lithium-ion batteries10.1007/s11581-016-1752-8 ↗
18. PVDF-HFP/PET/PVDF-HFP composite membrane for lithium-ion power batteries10.1016/j.ijhydene.2016.11.201 ↗
19. Preparation and characterization of a lithium-ion battery separator from cellulose nanofibers10.1016/j.heliyon.2015.e00032 ↗
20. A nano-based multilayer separator for lithium rechargeable battery10.20964/2016.08.58 ↗
21. Lithium-ion batteries with high charge rate capacity: influence of the porous separator10.1016/j.jpowsour.2007.07.018 ↗
22. Relaxation phenomenon and swelling behavior of regenerated cellulose fibers affected by water10.1016/j.carbpol.2019.115663 ↗
23. Fibrillation tendency of cellulosic fibers-part 3. Effects of alkali pretreatment of lyocell fiber10.1016/j.carbpol.2004.09.007 ↗
24. A comparative study on the low-temperature performance of LiFePO4/C and Li3V2(PO4)3/C cathodes for lithium-ion batteries10.1016/j.jpowsour.2010.10.063 ↗
25. Influence of current density on graphite anode failure in lithium-ion batteries10.1149/2.0701903jes ↗
26. Power capability and cyclic aging of commercial, high power lithium ion battery cells with respect to different cell designs10.1016/j.jpowsour.2019.03.075 ↗
27. Effects of high-rate cycling on the bulk internal pressure rise and capacity degradation of commercial LiCoO2 cells10.1149/2.0461506jes ↗
28. Mechanism of cellulose gelation from aqueous alkali-urea solution10.1016/j.carbpol.2012.03.023 ↗
29. Structure formation of regenerated cellulose from its solution and resultant features of high wettability10.3183/npprj-2015-30-01-p078-091 ↗
30. Separator technologies for lithium-ion batteries10.1007/s10008-010-1264-9 ↗
31. Effects of electrolyte composition on lithium plating in lithium-ion cells10.1149/1.3544439 ↗
32. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries10.1016/j.jpowsour.2013.12.060 ↗
33. The effects of defects on localized plating in lithium-ion batteries10.1149/2.1051507jes ↗
34. In-situ detection of lithium plating using high precision coulometry10.1149/2.0621506jes ↗
35. Temperature dependent ageing mechanisms in lithium-ion batteries - a post-mortem study10.1016/j.jpowsour.2014.03.112 ↗
36. Size dependence of transport non-uniformities on localized plating in lithium-ion batteries10.1149/2.1181805jes ↗