journal article·2021-01

An interface-modified solid-state electrochemical device for lithium extraction from seawater

Haiquan Zhang, Yuxi Ren, Xin Wu, Ning Wang

Publisher page

Abstract

Abstract Electrolysis-based technology is a potential low-cost method for Li extraction from seawater that can bridge the gap between the supply and demand. An all-solid-state electrochemical device can effectively prevent the side reactions of metallic lithium and liquid organic electrolyte. However, its Li-ion conductivity is at least three orders of magnitude lower than expected due to extremely poor wetting between the metallic Li and the solid-state electrolyte (SSE). To overcome this problem, an artificial interface-modified solid-state sandwich device with a TiO2 layer (Li/TiO2/SSE) is developed. The lithiated LixTiO2 film improves physical contact between Li and the SSE, and the interfacial resistance is reduced by 2–3 orders of magnitude. The average Li extraction efficiency of the solid-state device reaches 110 μg-Li/cm2 over 1 h in natural seawater via a flow-through column system. Charging voltage fluctuations of ±0.05V reveal the stability and reliability of the artificially modified device over 40 cycles. These superior properties demonstrate the potential of this system as a next-generation electrolysis-based device for Li extraction from natural seawater.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. A survey on non-orthogonal multiple access for 5G networks: research challenges and future trends10.1109/JSAC.2017.2725519 ↗
2. User association in 5G networks: a survey and an outlook10.1109/COMST.2016.2516538 ↗
3. An overview of sustainable green 5G networks10.1109/MWC.2017.1600343 ↗
4. Full duplex techniques for 5G networks: self-interference cancellation, protocol design, and relay selection10.1109/MCOM.2015.7105651 ↗
5. Advance review on the exploitation of the prominent energy-storage element lithium. Part II: from sea water and spent lithium ion batteries (LIBs)10.1016/j.mineng.2017.04.008 ↗
6. Material flow analysis of lithium in China10.1016/j.resourpol.2016.12.005 ↗
7. Lithium metal extraction from seawater10.1016/j.joule.2018.07.006 ↗
8. Rechargeable seawater battery and its electrochemical mechanism10.1002/celc.201402344 ↗
9. Development of coin-type cell and engineering of its compartments for rechargeable seawater batteries10.1016/j.jpowsour.2017.11.022 ↗
10. Rechargeable seawater batteries–From concept to applications
11. Lithium recovery from salt lake brine by H2TiO310.1039/C4DT00467A ↗
12. Recovery of lithium from urmia lake by a nanostructure MnO2 ion sieve10.1016/j.hydromet.2014.08.004 ↗
13. Adsorption and desorption behavior of lithium ion in spherical PVC–MnO2 ion sieve10.1021/ie300087s ↗
14. Lithium ion recovery from brine using granulated polyacrylamide–MnO2 ion-sieve10.1016/j.cej.2015.05.075 ↗
15. Lithium extraction from seawater by manganese oxide ion sieve MnO2·0.5 H2O10.1016/j.colsurfa.2014.12.025 ↗
16. Adsorptive Li+ mining from liquid resources by H2TiO3: Equilibrium, kinetics, thermodynamics, and mechanisms10.1016/j.jiec.2016.01.015 ↗
17. Synthesis of Li+ adsorbent (H2TiO3) and its adsorption properties10.1016/S1003-6326(13)62453-X ↗
18. Effect of crystal phases of titanium dioxide on adsorption performance of H2TiO3–lithium adsorbent10.1016/j.matlet.2014.07.176 ↗
19. Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries10.1038/s41560-018-0196-y ↗
20. Investigations on the electrochemical decomposition of the electrolyte additive vinylene carbonate in Li metal half cells and lithium ion full cells10.1016/j.jpowsour.2016.09.100 ↗
21. Anode-originated SEI migration contributes to formation of cathode–electrolyte interphase layer10.1016/j.jpowsour.2017.09.050 ↗
22. An artificial solid electrolyte interphase layer for stable lithium metal anodes10.1002/adma.201504526 ↗
23. Cryo-STEM mapping of solid–liquid interfaces and dendrites in lithium-metal batteries10.1038/s41586-018-0397-3 ↗
24. Dendrite growth model in battery cell combining electrode edge effects and stochastic forces into a diffusion limited aggregation scheme10.1016/j.jpowsour.2019.05.081 ↗
25. Germanium thin film protected lithium aluminum germanium phosphate for solid–state Li batteries10.1002/aenm.201702374 ↗
26. Transient behavior of the metal interface in lithium metal–garnet batteries10.1002/anie.201708637 ↗
27. Saltubased organic–inorganic nanocomposites: towards astable lithium metal/Li10GeP2S12 solid electrolyte interface10.1002/anie.201807304 ↗
28. Toward garnet electrolyte–based Li metal batteries: an ultrathin, highly effective, artificial solid-state electrolyte/metallic Li interface10.1126/sciadv.1601659 ↗
29. An electron/ion dualt–conductive alloy framework for high–rate and high capacity solid–state lithium–metal batteries
30. Bulk solid state rechargeable lithium ion battery fabrication with Al-doped Li7La3Zr2O12 electrolyte and Cu0.1V2O5 cathode10.1016/j.electacta.2012.11.059 ↗
31. Nitrogen-free sol–gel synthesis of Al-substituted cubic garnet Li7La3Zr2O12 (LLZO)10.1016/j.jpowsour.2014.12.066 ↗
32. Al-doped Li7La3Zr2O12 synthesized by a polymerized complex method10.1016/j.jpowsour.2011.05.065 ↗
33. Sol–gel synthesis and lithium ion conductivity of Li7La3Zr2O12 with garnet-related type structure10.1016/j.ssi.2011.01.002 ↗
34. High lithium ionic conductivity in the garnet–type oxide Li7− 2xLa3Zr2− xMoxO12 (x = 0 ithium ionic conducol–gel method10.1111/jace.14736 ↗
35. Fast lithium ion conduction in garnet–type Li7La3Zr2O1210.1002/anie.200701144 ↗
36. Hydrothermal synthesis of nanosized anatase and rutile TiO2 using amorphous phase TiO210.1039/b008974p ↗
37. Remarkable charge separation and photocatalytic efficiency enhancement through interconnection of TiO2 nanoparticles by hydrothermal treatment10.1002/anie.201510000 ↗
38. The origin of high electrolyte–electrode interfacial resistances in lithium cells containing garnet type solid electrolytes10.1039/C4CP02921F ↗