The role of the pH value in water-based pastes on the processing and performance of Ni-rich LiNi0.5Mn0.3Co0.2O2 based positive electrodes
Source abstract
Abstract
Abstract The influence of the preset pH value of the binder solution on aqueous processing of LiNi0.5Mn0.3Co0.2O2 positive electrodes is studied. The processed electrodes are investigated by means of electrochemical charge/discharge cycling, potentiostatic electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy. The results show major impact of the pH value of the binder solution on the cycling performance of lithium ion cells. Low binder solution pH values (here 7.6) lead to faster capacity fading within the first 100 cycles. In comparison, higher binder solution pH values (here 12.5) show similar fading compared to the reference electrodes based on poly(vinylidene difluoride) and N-methyl pyrrolidone as solvent. Positive electrode materials undergo a lithium-proton exchange, when in contact with water or other proton sources. Post-mortem analysis revealed that lower pH values of the binder solution potentially lead to more pronounced lithium-proton exchange. The previously inserted protons are extracted from the active material during electrochemical cycling, potentially initiate decomposition of the conductive salt LiPF6 and hence degrade the cell performance. In combination with LiPF6, inter alia HF might be formed, which then reacts with lithium from LiNi0.5Mn0.3Co0.2O2 or other active and inactive components and precipitate as M-F or other resistive interphases on the LiNi0.5Mn0.3Co0.2O2 surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Current research trends and prospects among the various materials and designs used in lithium-based batteries10.1007/s10800-013-0533-6 ↗
2. Best practice: performance and cost evaluation of lithium ion battery active materials with special emphasis on energy efficiency10.1021/acs.chemmater.6b02895 ↗
3. Winter · 2018
4. Theoretical versus practical energy: a plea for more transparency in the energy calculation of different rechargeable battery systems10.1002/aenm.201803170 ↗
5. Overview of current development in electrical energy storage technologies and the application potential in power system operation10.1016/j.apenergy.2014.09.081 ↗
6. Integration of renewable energy sources in future power systems10.1016/j.renene.2014.09.028 ↗
7. Integrating renewable energy sources into European grids10.1016/j.ijepes.2008.04.010 ↗
8. Li-ion battery materials10.1016/j.mattod.2014.10.040 ↗
9. Future generations of cathode materials: an automotive industry perspective10.1039/C5TA00361J ↗
10. Low cost, environmentally benign binders for lithium-ion batteries10.1149/1.3291976 ↗
11. Water soluble binder for fabrication of Li4Ti5O12 electrodes10.1016/j.jpowsour.2012.10.083 ↗
12. Choi Young-Min, Effect of carboxymethyl cellullose on aqueous processing10.1149/1.1979214 ↗
13. Sodium Carboxymethyl Cellulose a potential binder for Si Negative electrodes for Li ion batteries
14. Silicon/Graphite Composite Electrodes for High-Capacity anodes influence of binder chemistry on cycling stability10.1149/1.2888173 ↗
15. Effect of ambient storage on the degradation of Ni-rich positive electrode materials (NMC811) for Li-ion batteries10.1149/2.0401802jes ↗
16. In situ coating of LiNi0.33 Mn0.33 Co0.33 O2 particles to enable aqueous electrode processing10.1002/cssc.201600353 ↗
17. Performance of LiNi1/3Mn1/3Co1/3O2/graphite batteries based on aqueous binder10.1016/j.jpowsour.2013.10.018 ↗
18. Enabling aqueous binders for lithium battery cathodes – carbon coating of aluminum current collector10.1016/j.jpowsour.2013.10.039 ↗
19. Chemical weathering of layered Ni-rich oxide electrode materials_ evidence for cation exchange10.1149/2.0861707jes ↗
20. Lithium and deuterium NMR studies of acid-leached layered lithium manganese oxides10.1021/cm0206385 ↗
21. Comparative analysis of aqueous binders for high-energy Li-rich NMC as lithium-ion cathode and the impact of adding phosphoric acid10.1021/acsami.8b03657 ↗
22. Complementary strategies toward the aqueous processing of high-voltage LiNi0.5 Mn1.5 O4 lithium-ion cathodes10.1002/cssc.201702021 ↗
23. Editors' choice—growth of ambient induced surface impurity species on layered positive electrode materials and impact on electrochemical performance10.1149/2.0921714jes ↗
24. Towards water-based ultra-thick Li ion battery electrodes – a binder approach10.1016/j.jpowsour.2019.03.020 ↗
25. A reality check and tutorial on electrochemical characterization of battery cell materials: how to choose the appropriate cell setup10.1016/j.mattod.2019.07.002 ↗
26. The solid electrolyte interphase – the most important and the least understood solid electrolyte in rechargeable Li batteries10.1524/zpch.2009.6086 ↗
27. New insights into the structure-property relationship of high-voltage electrolyte components for lithium-ion batteries using the pKa value10.1016/j.electacta.2015.10.002 ↗
28. Influence of electrolyte additives on the cathode electrolyte interphase (CEI) formation on LiNi1/3Mn1/3Co1/3O2 in half cells with Li metal counter electrode10.1016/j.jpowsour.2016.08.023 ↗
29. Composition and growth behavior of the surface and electrolyte decomposition layer of/on a commercial lithium ion battery Li x Ni 1/3 Mn 1/3 Co 1/3 O 2 cathode determined by sputter depth profile X-ray photoelectron spectroscopy10.1021/la403276p ↗
30. XPS topofactors: determining overlayer thickness on particles and fibres10.1002/sia.3044 ↗
31. Pre-lithiation strategies for rechargeable energy storage technologies: concepts, promises and challenges10.3390/batteries4010004 ↗
32. Running out of lithium? A route to differentiate between capacity losses and active lithium losses in lithium-ion batteries10.1039/C7CP05405J ↗
33. Illig · 2014
34. The role of cations on the performance of lithium ion batteries: a quantitative analytical approach10.1021/acs.accounts.7b00523 ↗
35. The influence of different conducting salts on the metal dissolution and capacity fading of NCM cathode material10.1016/j.electacta.2014.04.091 ↗
36. Unraveling transition metal dissolution of Li1.04Ni1/3Co1/3Mn1/3O2 (NCM 111) in lithium ion full cells by using the total reflection X-ray fluorescence technique10.1016/j.jpowsour.2016.08.099 ↗
37. Cross talk between transition metal cathode and Li metal anode: unraveling its influence on the deposition/dissolution behavior and morphology of lithium10.1002/aenm.201900574 ↗
38. Investigation of thermal aging and hydrolysis mechanisms in commercial lithium ion battery electrolyte10.1016/j.jpowsour.2013.05.125 ↗
39. Ion chromatographic determination of hydrolysis products of hexafluorophosphate salts in aqueous solution10.1016/j.aca.2011.11.056 ↗
40. Influence of battery cell components and water on the thermal and chemical stability of LiPF6 based lithium ion battery electrolytes10.1016/j.electacta.2016.11.100 ↗
41. Refinement of the critical V–V separation for spontaneous magnetism in oxides10.1139/p87-206 ↗