Solid polymer electrolytes from double-comb Poly(methylhydrosiloxane) based on quaternary ammonium moiety-containing crosslinking system for Li/S battery
Source abstract
Abstract
Abstract The synthesis, characterization, and electrochemical cell performance of a double-comb poly (siloxane) solid polymer electrolyte (SPE) for Li–S battery application is reported. The SPE is designed with different degrees of chemical crosslinking via quaternary ammonium moieties. The chemical crosslinking enhanced dimensional stability and quaternization raised the dielectric constant of SPE. The SPE with 3% crosslinking ratio shows the highest Li+ ion conductivity of 6.6 × 10−4 Scm−1 at 30 °C. The electrochemical studies reveal a high specific capacity value of 1082 mAhg−1 with good capacity retention over several cycles. The SPE demonstrate excellent performance in Li–S battery even with high sulfur loading and varied electrochemical stability with good lithium plating/stripping performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Rechargeable lithium-sulfur batteries10.1021/cr500062v ↗
2. Liquid electrolyte lithium/sulfur battery: fundamental chemistry, problems, and solutions10.1016/j.jpowsour.2012.12.102 ↗
3. A lithium/dissolved sulfur battery with an organic electrolyte10.1149/1.2129079 ↗
4. Electrochemical characterization and performance improvement of lithium/sulfur polymer batteries10.1016/j.jpowsour.2004.07.002 ↗
5. Characterization of the solid electrolyte interphase on lithium anode for preventing the shuttle mechanism in lithium-sulfur batteries10.1016/j.jpowsour.2013.08.041 ↗
6. Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes10.1016/S0378-7753(00)00432-8 ↗
7. Review on gel polymer electrolytes for lithium batteries10.1016/j.eurpolymj.2005.09.017 ↗
8. Tarascon · 2010 · 171
9. Solid polymer electrolytes: materials designing and all-solid-state battery applications: an overview10.1088/0022-3727/41/22/223001 ↗
10. Polymer electrolytes for lithium polymer batteries10.1039/C6TA02621D ↗
11. A highly conductive solid-state polymer electrolyte based on a double-comb polysiloxane polymer with oligo(ethylene oxide) side chains10.1021/om990261l ↗
12. Solid polymer electrolytes based on cross-linked polysiloxane-g-oligo(ethylene oxide): ionic conductivity and electrochemical properties10.1016/S0378-7753(03)00189-7 ↗
13. Synthesis and ionic conductivity of mixed substituted polysiloxanes with oligo ethyleneoxy and cyclic carbonate substituents10.1007/s11201-007-9028-9 ↗
14. New lithium ion conducting polymer electrolytes based on polysiloxane grafted with Si-tripodand centers10.1016/j.elecom.2007.02.019 ↗
15. Tuning thin-film electrolyte for lithium battery by grafting cyclic carbonate and combed poly(ethylene oxide) on polysiloxane10.1002/cssc.201400113 ↗
16. Simultaneously enhancing ionic conductivity and mechanical properties of solid polymer electrolytes via a copolymer multi-functional filler10.1016/j.electacta.2010.08.036 ↗
17. Dielectric and electrical characterization of (PEO-PMMA)-LiBF4-EC plasticized solid polymer electrolyte films10.1007/s10965-017-1290-8 ↗
18. Dielectric constants for quantum chemistry and Li-ion batteries: solvent blends of ethylene carbonate and ethyl methyl carbonate10.1021/acs.jpcc.5b06022 ↗
19. Effects of plasticizer and nanofiller on the dielectric dispersion and relaxation behavior of polymer blend based solid polymer electrolytes10.1016/j.cap.2014.12.003 ↗
20. Li-ion transport, structural and thermal studies on lithium triflate and barium titanate incorporated poly(vinylidene fluoride-co-hexafluoropropene) based polymer electrolyte10.1016/j.ssi.2016.03.008 ↗
21. Synthesis and characterization of polar polysiloxanes
22. Segmental dynamics and dielectric constant of polysiloxane polar copolymers as plasticizers for polymer electrolytes10.1021/acsami.5b10797 ↗
23. Highly conductive solid-state hybrid electrolytes operating at subzero temperatures10.1021/acsami.7b07159 ↗
24. Conductivity enhancement of polyacrylonitrile-based electrolytes by addition of cascade nitrile compounds10.1016/S0378-7753(00)00444-4 ↗
25. Facile preparation of polymer electrolytes based on the polymerizedionic liquid poly((4-vinylbenzyl)trimethylammoniumbis(trifluoromethanesulfonylimide)) for lithium secondary batteries10.1016/j.electacta.2013.12.179 ↗
26. Anion exchanged polymerized ionic liquids: high free volume single ion conductors10.1016/j.polymer.2011.01.031 ↗
27. Network polymer electrolytes with free chain ends as internal plasticizer10.1149/1.1838514 ↗
28. Hybrid ionogel electrolytes for high temperature lithium batteries10.1039/C4TA06062H ↗
29. Solid polymer electrolytes. IV. Preparation and characterization of novel cross-linked epoxy‐siloxane polymer complexes as polymer electrolytes10.1002/pola.10204 ↗
30. Synthesis of hard–soft–hard triblock copolymers, poly(2-naphthyl glycidyl ether)-block-poly[2-(2-(2-methoxyethoxy)ethoxy)ethyl glycidyl ether]-block-poly(2-naphthyl glycidyl ether), for solid electrolytes10.1021/acs.macromol.7b02553 ↗
31. Single-ion block copoly(ionic liquid)s as electrolytes for all-solid state lithium batteries10.1021/acsami.6b01973 ↗
32. A new single-ion polymer electrolyte based on polyvinyl alcohol for lithium ion batteries10.1016/j.electacta.2012.08.114 ↗
33. Studies on electrical conductivity and dielectric behaviour of PVdF-HFP-PMMA-NaI polymer blend electrolyte10.1007/s12034-012-0387-2 ↗
34. Lithium perchlorate doped plasticized chitosan and starch blend as biodegradable polymer electrolyte for supercapacitors10.1016/j.electacta.2012.06.032 ↗
35. Dielectric properties and fluctuating relaxation processes of poly(methyl methacrylate) based polymeric nanocomposite electrolyte10.1016/j.jpcs.2014.02.008 ↗
36. New interpenetrating network type poly(siloxane-g-ethylene oxide) polymer electrolyte for lithium battery10.1016/S0378-7753(03)00187-3 ↗
37. Ion conductive characteristics of cross-linked network polysiloxane-based solid polymer electrolytes10.1016/j.ssi.2004.04.007 ↗
38. Zwitterion-containing ionogel electrolytes10.1021/acs.chemmater.6b04456 ↗
39. Effect of zwitterions on electrochemical properties of oligoether-based electrolytes10.1016/j.electacta.2014.12.067 ↗
40. The zwitterion effect in high-conductivity polyelectrolyte materials10.1038/nmat1044 ↗
41. Super soft all-ethylene oxide polymer electrolyte for safe all-solid lithium batteries10.1038/srep19892 ↗
42. Alternating copolymers of carbon dioxide with glycidyl ethers for novel ion-conductive polymer electrolytes10.1016/j.polymer.2010.07.037 ↗
43. Strong tendency of homeotropic alignment and anisotropic lithium ion conductivity of sulfonate functionalized zwitterionic imidazolium ionic liquid crystals10.1021/la402336n ↗
44. High lithium ionic conductivity of poly(ethylene oxide)s having sulfonate groups on their chain ends10.1039/a700583k ↗
45. Electrochemical and mechanical durability of cast membranes and a reinforced membrane based on sulfonated poly(arylene ether sulfone) for polymer electrolyte fuel cells10.1246/cl.131152 ↗
46. Polymer electrolytes reinforced by Celgard® membranes10.1149/1.2048517 ↗
47. Polysulfide-blocking microporous polymer membrane tailored for hybrid Li-sulfur flow batteries10.1021/acs.nanolett.5b02078 ↗
48. Ionic conductivity promotion of polymer electrolyte with ionic liquid grafted oxides for all-solid-state lithium–sulfur batteries10.1039/C7TA03699J ↗
49. Immobilization of sulfur in microgels for lithium-sulfur battery10.1039/C6CC00489J ↗