Three-dimensional monolithic corrugated graphene/Ni foam for highly stable and efficient Li metal electrode
Source abstract
Abstract
Abstract To expedite the commercialization of Li metal anodes by combining them with Li transition metal oxides to achieve a high operating voltage, a carbonate-based electrolyte should be used, which is unstable at low potentials. Therefore, hybrid engineering to prevent dendritic Li growth and increase the coulombic efficiency in highly reactive electrolytes is essential. Here, three-dimensional monolithic corrugated graphene on nickel foam electrode as a Li metal storage framework in carbonate electrolytes is reported. The electrode is fabricated using a simple acid-catalyzed hydrothermal method. This involves separation of few-layer graphene sheets and formation of corrugated graphene sheets on porous Ni foam. During the initial Li deposition, Li ions are inserted into the vertical edge plane boundaries between graphene sheets. Li metal deposits then nucleate and grow further underneath the graphene sheets. The corrugated graphene sheets unfold and function as an artificial solid electrolyte interphase layer that separates the Li deposits from the reactive electrolyte. Consequently, the dendritic Li growth is effectively prevented, and the coulombic efficiency is significantly improved. Electrochemical tests demonstrate the effectiveness of this material design concept, which provides a new route to the development of a Li metal electrode for use in highly reactive electrolytes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Li-O2 and Li-S batteries with high energy storage10.1038/nmat3191 ↗
2. Metallic anodes for next generation secondary batteries10.1039/c3cs60177c ↗
3. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
4. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
5. Heterogeneous nucleation and growth of lithium electrodeposits on negative electrodes10.1149/1.057304jes ↗
6. Nanoscale nucleation and growth of electrodeposited lithium metal10.1021/acs.nanolett.6b04755 ↗
7. Effect of current density on morphology of lithium electrodeposited in ionic liquid-based electrolytes10.1149/2.0331409jes ↗
8. Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth10.1038/nenergy.2016.10 ↗
9. Metal oxide nanoparticles induced step-edge nucleation of stable Li metal anode working under an ultrahigh current density of 15 mA cm–210.1016/j.nanoen.2017.12.055 ↗
10. Lithiophilic sites in doped graphene guide uniform lithium nucleation for dendrite‐free lithium metal anodes10.1002/ange.201702099 ↗
11. Conductive porous carbon film as a lithium metal storage medium10.1016/j.electacta.2015.06.140 ↗
12. Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating10.1073/pnas.1518188113 ↗
13. Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode10.1039/C4CP05865H ↗
14. Stable Li plating/stripping electrochemistry realized by a hybrid Li reservoir in spherical carbon granules with 3D conducting skeletons10.1021/jacs.7b01763 ↗
15. Electrochemical behavior of lithium imide/cyclic ether electrolytes for 4 V lithium metal rechargeable batteries10.1149/1.1392581 ↗
16. Chemical reactivity of PF 5 and LiPF6 in ethylene carbonate/dimethyl carbonate solutions10.1149/1.1353158 ↗
17. Conductive nanostructured scaffolds render low local current density to inhibit lithium dendrite growth10.1002/adma.201504117 ↗
18. Few-layer graphene island seeding for dendrite-free Li metal electrodes10.1021/acsami.6b09757 ↗
19. Dual-phase lithium metal anode containing a polysulfide-induced solid electrolyte interphase and nanostructured graphene framework for lithium–sulfur batteries10.1021/acsnano.5b01990 ↗
20. Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes10.1038/nnano.2016.32 ↗
21. Ultrathin two-dimensional atomic crystals as stable interfacial layer for improvement of lithium metal anode10.1021/nl503125u ↗
22. Synthesis of N-doped graphene by chemical vapor deposition and its electrical properties10.1021/nl803279t ↗
23. Reduced-graphene oxide/molybdenum oxide/polyaniline ternary composite for high energy density supercapacitors: synthesis and properties10.1039/c2jm16216d ↗
24. Chemical analysis of graphene oxide films after heat and chemical treatments by X-ray photoelectron and Micro-Raman spectroscopy10.1016/j.carbon.2008.09.045 ↗
25. A graphene-like oxygenated carbon nitride material for improved cycle-life lithium/sulfur batteries10.1021/acs.nanolett.5b01919 ↗
26. Surface modification of poly (ethylene terephthalate) fibers induced by radio frequency air plasma treatment10.1016/S0169-4332(03)00265-4 ↗
27. Visualization of charge propagation along individual pili proteins using ambient electrostatic force microscopy10.1038/nnano.2014.236 ↗
28. Modeling the nucleation and growth of Li at metal current collector/LiPON interfaces10.1149/2.0051513jes ↗
29. Lithium dendrite growth mechanisms in liquid electrolytes10.1016/j.nanoen.2017.08.056 ↗
30. Paunovic · 2007
31. The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling10.1016/j.carbon.2016.04.008 ↗
32. Substrate-regulated morphology of graphene10.1088/0022-3727/43/7/075303 ↗
33. A study of highly oriented pyrolytic graphite as a model for the graphite anode in Li-Ion batteries10.1149/1.1391688 ↗
34. Morphology and chemical compositions of surface films of lithium deposited on a Ni substrate in nonaqueous electrolytes10.1016/0022-0728(95)03972-J ↗
35. X-ray photoelectron spectroscopy study of surface films formed on Li electrodes freshly prepared in alkyl carbonate solutions10.1021/la981048h ↗
36. A new look at the solid electrolyte interphase on graphite anodes in Li-ion batteries10.1016/j.jpowsour.2005.05.062 ↗
37. Analysis of the surface of lithium in organic electrolyte by atomic force microscopy, Fourier transform infrared spectroscopy and scanning auger electron microscopy10.1016/S0378-7753(98)00151-7 ↗
38. Failure and stabilization mechanisms of graphite electrodes10.1021/jp962815t ↗
39. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries10.1016/j.electacta.2010.05.072 ↗
40. Advanced model for solid electrolyte interphase electrodes in liquid and polymer electrolytes10.1149/1.1837858 ↗
41. Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy10.1126/science.aam6014 ↗
42. Direct synthesis of lithium-intercalated graphene for electrochemical energy storage application10.1021/nn201527p ↗
43. Incommensurate graphene foam as a high capacity lithium intercalation anode10.1038/srep39944 ↗
44. DNA-modified nanocrystalline diamond thin-films as stable, biologically active substrates10.1038/nmat779 ↗
45. Handbook of X-ray photoelectron spectroscopy
46. The correlation between surface chemistry, surface morphology, and cycling efficiency of lithium electrodes in a few polar aprotic systems10.1149/1.2096425 ↗
47. Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries10.1016/S0378-7753(00)00431-6 ↗