journal article·2018-08Open access

Dynamic charge-discharge phase transitions in Li3V2(PO4)3 cathodes

Daniel Risskov Sørensen, Jette Katja Mathiesen, Dorthe Bomholdt Ravnsbæk

Abstract

Abstract Monoclinic α-Li3V2(PO4)3 is a promising cathode material for future Li-ion batteries due to its high theoretical capacity, good capacity retention and relatively high ionic conductivity. The material undergoes a series of complex phase transitions which depend on the number of Li-ions extracted during charge. The phase behavior has been extensively studied under (quasi-) equilibrium conditions, however insight into the phase evolution during dynamic conditions is lacking. Through operando synchrotron X-ray diffraction we report the complex series of structural phase transitions under dynamic battery charge-discharge conditions in α-Li3V2(PO4)3 cathodes with extraction of both two and three Li-ions. For extraction of two Li-ions, the phase evolution follows the series of expected two-phase transitions, while for extraction of three Li-ions the dynamic phase behavior differs significantly from that observed by equilibrium studies, e.g. we reveal unexpected solid solution behavior during removal of the last Li-ion and unforeseen structural hysteresis between charge and discharge. Our results are further reinforced by electrochemical analysis. This paper joins a series of recent reports, where extended solid solution behavior in battery electrode materials is observed under operando conditions, and reinforces the importance of these types of measurements to provide a more realistic picture of working battery materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Challenges for rechargeable Li batteries †10.1021/cm901452z ↗
2. Understanding electrochemical potentials of cathode materials in rechargeable batteries10.1016/j.mattod.2015.10.009 ↗
3. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
4. Lithium metal phosphates, power and automotive applications10.1016/j.jpowsour.2008.08.024 ↗
5. Li3V2(PO4)3 cathode materials for lithium-ion batteries: a review10.1016/j.jpowsour.2014.01.126 ↗
6. Boron substituted Na 3 V 2 (P 1 −x B x O 4 ) 3 cathode materials with enhanced performance for sodium-ion batteries10.1002/advs.201600112 ↗
7. Tuning the position of the redox couples in materials with NASICON structure by anionic substitution10.1149/1.1838513 ↗
8. Electrochemical property: structure relationships in monoclinic Li 3-y V 2 (PO 4 ) 310.1021/ja034565h ↗
9. Li 2.5 V 2 (PO 4 ) 3 ;: a room-temperature analogue to the fast-ion conducting high-temperature γ-phase of Li 3 V 2 (PO 4 ) 310.1021/cm034802f ↗
10. Electrochemical properties of lithium vanadium phosphate as a cathode material for lithium-ion batteries10.1149/1.1479295 ↗
11. A comparative structural and electrochemical study of monoclinic Li3Fe2(PO4)3 and Li3V2(PO4)310.1016/S0378-7753(03)00150-2 ↗
12. In situ x-ray diffraction during lithium extraction from rhombohedral and monoclinic Li[sub 3]V[sub 2](PO[sub 4])[sub 3]10.1149/1.1563871 ↗
13. Nanostructured composites: a high capacity, fast rate Li3V2(PO4)3/Carbon cathode for rechargeable lithium batteries10.1002/1521-4095(20021104)14:21<1525::AID-ADMA1525>3.0.CO;2-3 ↗
14. Charge ordering in lithium vanadium phosphates: electrode materials for lithium-ion batteries10.1021/ja028973h ↗
15. Experimental and computational study of the structure and electrochemical properties of Li x M 2 (PO 4 ) 3 compounds with the monoclinic and rhombohedral structure10.1021/cm020348o ↗
16. Capturing metastable structures during high-rate cycling of LiFePO4 nanoparticle electrodes10.1126/science.1252817 ↗
17. Engineering the transformation strain in LiMn y Fe 1– y PO 4 olivines for ultrahigh rate battery cathodes10.1021/acs.nanolett.5b05146 ↗
18. Extended solid solutions and coherent transformations in nanoscale olivine cathodes10.1021/nl404679t ↗
19. Accommodating high transformation strains in battery electrodes via the formation of nanoscale intermediate phases: operando investigation of olivine NaFePO 410.1021/acs.nanolett.6b04971 ↗
20. Study on structure and electrochemical properties of carbon-coated monoclinic Li3V2(PO4)3 using synchrotron based in situ X-ray diffraction and absorption10.1016/j.jallcom.2013.03.188 ↗
21. A promising sol–gel route based on citric acid to synthesize Li3V2(PO4)3/carbon composite material for lithium ion batteries10.1016/j.electacta.2007.01.019 ↗
22. Two-dimensional detector software: from real detector to idealised image or two-theta scan10.1080/08957959608201408 ↗
23. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
24. The AMPIX electrochemical cell: a versatile apparatus for in situ X-ray scattering and spectroscopic measurements10.1107/S0021889812042720 ↗
25. Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method10.1016/j.electacta.2006.04.036 ↗
26. Performance characteristics of lithium vanadium phosphate as a cathode material for lithium-ion batteries