journal article·2017-08

Acrylonitrile-grafted poly(vinyl alcohol) copolymer as effective binder for high-voltage spinel positive electrode

Shinichi Tanaka, Takuya Narutomi, Shigeru Suzuki, Aiko Nakao, Hiroshi Oji, Naoaki Yabuuchi

Publisher page

Abstract

Abstract Acrylonitrile-grafted poly(vinyl alcohol) copolymer with a branched structure is synthesized and used as binder for a LiNi1/2Mn3/2O4 composite electrode. Electrode performances of composite electrodes with different binders are compared in Li cells at 50 °C. The branched copolymer has better coatability to active materials in comparison to a simple mixture of linear polymers and conventional PVdF as evidenced by hard X-ray photoelectron spectroscopy. Cyclability is effectively improved by using the branched copolymer at elevated temperatures because of high chemical stability of the coated polymer layer and formation of a protective layer on cycles. Moreover, excellent rate-capability is realized by applying the branched copolymer with high adhesive strength, and the composite electrode delivers 70 mAh g−1 of discharge capacity at a rate of 1280 mA g−1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Sodium carboxymethyl cellulose: a potential binder for Si negative electrodes for Li-Ion batteries10.1149/1.2398725 ↗
2. LiFePO4 water-soluble binder electrode for Li-ion batteries10.1016/j.jpowsour.2006.09.067 ↗
3. Functional interface of polymer modified graphite anode10.1016/j.jpowsour.2008.09.092 ↗
4. Polyacrylate modifier for graphite anode of lithium-ion batteries10.1149/1.3086262 ↗
5. A major constituent of brown algae for use in high-capacity Li-Ion batteries10.1126/science.1209150 ↗
6. CMC as a binder in LiNi0.4Mn1.6O4 5 V cathodes and their electrochemical performance for Li-ion batteries10.1016/j.electacta.2011.11.094 ↗
7. Electrochemical properties of LiCoO2 electrodes with latex binders on high-voltage exposure10.1149/2.0151504jes ↗
8. Graphite-silicon-polyacrylate negative electrodes in ionic liquid electrolyte for safer rechargeable Li-Ion batteries10.1002/aenm.201100236 ↗
9. Surface modification of poly(vinylidene difluoride)(PVDF) by LiOH10.1039/c39910000958 ↗
10. Effect of high adhesive polyvinyl alcohol binder on the anodes of lithium ion batteries10.1016/j.elecom.2011.06.034 ↗
11. Effects of polymeric binders on electrochemical performances of spinel lithium manganese oxide cathodes in lithium ion batteries10.1016/j.jpowsour.2014.06.167 ↗
12. Crop-derived polysaccharides as binders for high-capacity silicon/graphite-based electrodes in lithium-ion batteries10.1002/cssc.201200650 ↗
13. Lithium polyacrylate (LiPAA) as an advanced binder and a passivating agent for high-voltage Li-Ion batteries10.1002/aenm.201501008 ↗
14. Studies of reactions with polymers. VII. The reaction of acrylonitrile-grafted polyvinyl alcohol copolymer (PVA-g-AN) with NaOH/HCHO aqueous solution10.1002/pola.1993.080310210 ↗
15. Sakurai, Y.; Yoshida, J.; Watanabe, J. PCT/JP2014/076709.
16. Topotactic two-phase reactions of Li Ni1/2Mn3/2 O-4 (P4(3)32) in nonaqueous lithium cells10.1149/1.1639162 ↗
17. A facile approach to derive binder protective film on high voltage spinel cathode materials against high temperature degradation10.1016/j.apsusc.2015.08.046 ↗
18. A high voltage cathode prepared by using polyvinyl acetate as a binder10.1016/j.ssi.2015.03.008 ↗
19. New O2/P2-type Li-Excess layered manganese oxides as promising multi-functional electrode materials for rechargeable Li/Na batteries10.1002/aenm.201301453 ↗
20. Probing the origin of enhanced stability of “AlPO4” nanoparticle coated LiCoO2 during cycling to high voltages: combined XRD and XPS studies10.1021/cm900862v ↗
21. Influence of the PVdF binder on the stability of LiCoO2 electrodes10.1016/j.elecom.2005.09.010 ↗
22. Failure mechanism of graphite/LiNi0.5Mn1.5O4 cells at high voltage and elevated temperature10.1149/2.022305jes ↗
23. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems—the solid electrolyte interphase model10.1149/1.2128859 ↗
24. High performance spinel LiNi0.5Mn1.5O4 cathode material by lithium polyacrylate coating for lithium ion battery10.1016/j.electacta.2014.08.030 ↗
25. Enhanced electrochemical properties of a LiNiO2-based cathode material by removing lithium residues with (NH4)2HPO410.1039/C4TA01282H ↗
26. High-capacity electrode materials for rechargeable lithium batteries: Li3NbO4-based system with cation-disordered rocksalt structure10.1073/pnas.1504901112 ↗
27. Synthesis and electrochemical properties of Li1.3Nb0.3V0.4O2 as a positive electrode material for rechargeable lithium batteries10.1039/C5CC08034G ↗
28. A disordered rock-salt Li-excess cathode material with high capacity and substantial oxygen redox activity: Li1.25Nb0.25Mn0.5O210.1016/j.elecom.2015.08.003 ↗
29. The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials10.1038/nchem.2524 ↗