Standardized hydrogen storage module with high utilization factor based on metal hydride-graphite composites
Source abstract
Abstract
Abstract In view of hydrogen based backup power systems or small-scale power2gas units, hydrogen storages based on metal hydrides offer a safe and reliable solution. By using Hydralloy C5 as suitable hydride forming alloy, the present tank design guarantees very simple operating conditions: pressures between 4 bar and 30 bar, temperatures between 15 °C and 40 °C and minimal efforts for thermal management in combination with fast and constant charging and discharging capabilities. The modular tank consists of 4 layers with 5 reactor tubes each that are filled with metal hydride-graphite composites of a diameter of 21 mm. Experiments show that each layer of this tank is able to desorb the desired amount of hydrogen for a fuel cell operation at electrical power of 160 W el for 100 min reaching a utilization factor of 93% of the stored hydrogen at RC. Furthermore, the experimental results of modularity, increasing loads and the electric air ventilation are presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Ammonia Synthesis and Nitrogen Reduction · Hybrid Renewable Energy Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Saur · 2008
2. Cyclic stability of various application-relevant metal hydrides10.1016/0925-8388(95)01776-3 ↗
3. Thermodynamic and structural changes of various intermetallic compounds during extended cycling in closed systems10.1016/S0925-8388(96)03041-1 ↗
4. Metal hydride materials for solid hydrogen storage: a review10.1016/j.ijhydene.2006.11.022 ↗
5. Coupling and thermal integration of a solid oxide fuel cell with a magnesium hydride tank10.1016/j.ijhydene.2013.01.140 ↗
6. Various tools for optimizing large scale magnesium hydride storage
7. Metal hydride hydrogen storage for near-ambient temperature and atmospheric pressure applications, a PDSC study10.1016/0360-3199(95)00025-9 ↗
8. Metal hydride systems for hydrogen storage and supply for stationary and automotive low temperature PEM fuel cell power modules10.1016/j.ijhydene.2015.01.095 ↗
9. Development of a modular room-temperature hydride storage system for vehicular applications
10. Characterisation of a 3 kW PEFC power system coupled with a metal hydride H2 storage10.1016/j.jpowsour.2006.11.006 ↗
11. Study on a metal hydride tank to support energy storage for renewable energy10.1016/j.jallcom.2013.03.152 ↗
12. Novel fuel cell stack with coupled metal hydride containers10.1016/j.jpowsour.2016.07.096 ↗
13. Cyclic stability test of AB2 type (Ti, Zr)(Ni, Mn, V, Fe)2.18 for stationary hydrogen storage in water contaminated hydrogen10.1016/j.jallcom.2013.03.230 ↗
14. Long-term cycle stability of metal hydride-graphite composites10.1016/j.ijhydene.2015.09.013 ↗
15. Solid-state hydrogen storage in Hydralloy–graphite composites10.1016/j.jpowsour.2012.12.044 ↗
16. The normalized pressure dependence method for the evaluation of kinetic rates of metal hydride formation/decomposition10.1016/S0925-8388(98)00859-7 ↗
17. Hydrogen storage systems based on hydride–graphite composites: computer simulation and experimental validation
18. Identification of critical parameters for PEMFC stack performance characterization and control strategies for reliable and comparable stack benchmarking10.1016/j.ijhydene.2016.08.065 ↗
19. Performance of electric forklift with low-temperature polymer exchange membrane fuel cell power module and metal hydride hydrogen storage extension tank10.1016/j.jpowsour.2016.03.058 ↗
20. Effective thermal conductivity of metal hydride beds10.1016/0022-5088(83)90340-5 ↗
21. Design of the metal hydride reactors - a review on the key technical issues10.1016/j.ijhydene.2010.01.053 ↗
22. Metal hydride based heating and cooling systems: a review10.1016/j.ijhydene.2010.01.115 ↗
23. Experimental results of a compact thermally driven cooling system based on metal hydrides10.1016/j.ijhydene.2010.04.184 ↗
24. Heat and gas transport properties in pelletized hydride–graphite-composites for hydrogen storage applications10.1016/j.ijhydene.2012.09.159 ↗
25. Considerations on the H2 desorption process for a combination reactor based on metal and complex hydrides10.1016/j.ijhydene.2015.03.136 ↗
26. Investigations of the structural stability of metal hydride composites by in-situ neutron imaging10.1016/j.jpowsour.2015.05.039 ↗