journal article·2017-02

Intermediate-temperature solid oxide fuel cell employing reformed effective biogas: Power generation and inhibition of carbon deposition

Michihiro Miyake, Makoto Iwami, Kenta Goto, Kazuhito Iwamoto, Koki Morimoto, Makoto Shiraishi, Kenji Takatori, Mizue Takeuchi, Shunsuke Nishimoto, Yoshikazu Kameshima

Publisher page

Abstract

Abstract A power generation system consisting of an intermediate-temperature solid oxide fuel cell (IT-SOFC) and an external reformer for biogas is developed, and its performance is investigated for advanced use of effective biogas. The IT-SOFC is fueled with syngas produced via biogas reforming, and is successfully operated at 600 and 700 °C using Ni 0.8 Cu 0.2 alloy/gadolinia-doped ceria electrolyte (Ni 0.8 Cu 0.2 /GDC) cermet anodes and a LaAlO 3 supported-Ni (Ni/LaAlO 3 ) catalyst. The Ni/LaAlO 3 catalyst stably exhibits high reforming performance for effective biogas at 800 °C for 27 h, and carbon deposition on the catalyst is prevented. The electrochemical performance of the Ni 0.8 Cu 0.2 /GDC cermet anode using syngas fuel possessing a H 2 :CO ratio of approximately 3:1 is comparable to the performance achieved with H 2 fuel; the anode remains stable after 24 h of operation at 700 °C without interruption and is unaffected by carbon deposition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. 2009 · 158
2. Research on the methane fermentation system (in Japanese)
3. Research on the methane fermentation system (II) (in Japanese)
4. Biogas as a fuel source for SOFC co-generators10.1016/j.jpowsour.2003.09.027 ↗
5. Process flow model of solid oxide fuel cell system supplied with sewage biogas10.1016/j.jpowsour.2004.01.013 ↗
6. Power Generation from biogas using SOFC-Results for a 1 kWe demonstration unit10.1002/fuce.201300033 ↗
7. Direct oxidation of hydrocarbons in a solid oxide fuel cell I. methane oxidation10.1149/1.1392521 ↗
8. Electrochemical oxidation of H2 and CO in a H2-H2O-CO-CO2 system at the interface of a Ni-YSZ cermet electrode and YSZ electrolyte10.1149/1.1393409 ↗
9. Anodes for direct oxidation of dry hydrocarbons in a solid-oxide fuel cell10.1002/1521-4095(200010)12:19<1465::AID-ADMA1465>3.0.CO;2-9 ↗
10. Fuel flexibility in power generation by solid oxide fuel cells10.1016/S0167-2738(02)00351-X ↗
11. Effect of carbon deposition by carbon monoxide disproportionation on electrochemical characteristics at low temperature operation for solid oxide fuel cells10.1016/j.jpowsour.2011.01.061 ↗
12. Fabrication and characterization of Cu-Ni-YSZ SOFC anodes for direct use of methane via Cu-electroplating10.1016/j.ijhydene.2009.04.060 ↗
13. Sm0.2(Ce1-xTix)0.8O1.9 modified Ni-yttria-stabilized zirconia anode for direct methane fuel cell10.1016/j.jpowsour.2011.01.062 ↗
14. Ni modified ceramic anodes for direct-methane solid oxide fuel cells10.1016/j.elecom.2010.11.012 ↗
15. Electrochemical performance of Ni1-xFex-Ce0.8Gd0.2O1.9 cermet anodes for solid oxide fuel cells using hydrocarbon fuel10.1016/j.ceramint.2012.06.039 ↗
16. Lanthanum promoted NiO-SDC anode for low temperature solid oxide fuel cells fueled with methane10.1016/j.jpowsour.2011.10.081 ↗
17. Direct-methane solid oxide fuel cells with hierarchically porous Ni-based anode deposited with nanocatalyst layer10.1016/j.nanoen.2014.08.016 ↗
18. Performance of the nano-structured Cu-Ni (alloy)-CeO2 anode for solide oxide fuel cells10.1016/j.jpowsour.2014.10.122 ↗
19. Methane on-cell reforming in nickel-iron alloy supported solid oxide fuel cells10.1016/j.jpowsour.2015.03.062 ↗
20. Internal carbon dioxide reforming by methane over Ni-YSZ-CeO2 catalyst electrode in electrochemical cell10.1016/S0926-860X(01)00735-9 ↗
21. Catalytic and electrocatalytic behavior of Ni-based cermet anodes under internal dry reforming of CH4+CO2 mixtures in SOFCs10.1016/j.ssi.2006.03.040 ↗
22. Ni1-x-yMgxAlyO-ScSZ anodes for solid oxide fuel cells10.1016/j.ssi.2006.06.010 ↗
23. Open- and closed-circuit study of an intermediate temperature SOFC directly fueled with simulated biogas mixtures10.1016/j.jpowsour.2005.12.069 ↗
24. Electricity production from wastewater treatment via a novel biogas-SOFC aided process10.1016/j.ssi.2007.12.049 ↗
25. Feasibility of direct-biogas SOFC10.1016/j.ijhydene.2008.07.101 ↗
26. Internal reforming SOFC running on biogas10.1016/j.ijhydene.2010.05.064 ↗
27. Experimental investigation of direct internal reforming of biogas in solid oxide fuel cells10.1016/j.ijhydene.2009.12.146 ↗
28. Long-term operation stabilitytests of intermediate and high temperature Ni-based anodes' SOFCs directly fueled with simulated biogas mixtures10.1016/j.ijhydene.2012.02.147 ↗
29. Study of a SOFC with a bimetallic Cu-Co-ceria anode directly fueled with simulated biogas mixtures10.1016/j.ijhydene.2013.06.142 ↗
30. Recovery of rare metal compounds from nickel-metal hydride battery waste and their application to CH4 dry reforming catalyst10.1016/j.jhazmat.2009.03.079 ↗
31. Study of carbon dioxide reforming of methane over Ni/yttria-doped ceria and effect of thermal treatments of support on the activity behaviors10.1016/S0926-860X(03)00054-1 ↗
32. A comparison of oxygen-vacancy effect on activity behaviors of carbon dioxide and steam reforming of methane over supported nickel catalysts10.1007/s10562-005-8697-2 ↗
33. CO2 reforming of CH4 over Ni/perovskite catalysts prepared by solid phase crystallization method10.1016/S0926-860X(99)00071-X ↗
34. Catalytic activities and coking resistance of Ni/perovskites in steam reforming of methane10.1016/j.apcata.2005.02.020 ↗
35. Biogas reforming over BaTi1-xSnxO3-supported Ni-based catalysts recovered from spent Ni-metal-hydride batteries10.1016/j.ijhydene.2015.04.106 ↗
36. Comparison of performance of Cu-CeO2-YSZ and Ni-YSZ composite SOFC anodes with H2, CO, and syngas10.1016/j.jpowsour.2004.09.022 ↗
37. Syngas reactivity over (LaAg)(CoFe)O3 and Ag-added (LaSr)(CoFe)O3 anodes of solid oxide fuel cells10.1016/j.jpowsour.2010.11.012 ↗
38. Solid oxide fuel cell with NiCo-YSZ cermet anode for oxidation of CO/H2 fuel mixtures10.1016/j.jpowsour.2011.10.080 ↗
39. Ni-Cu/samaria-doped ceria catalysts for steam reforming of methane in the presence of carbon dioxide10.1016/j.apcata.2006.02.027 ↗
40. Catalytic activity of bimetallic nickel alloys for solid-oxide fuel cell anode reactions from density-functional theory10.1016/j.jpowsour.2011.01.007 ↗
41. Electrochemical performances of Ni1-xCux/SDC cermet anodes for intermediate-temperature SOFCs using syngas fuel10.1016/j.ijhydene.2016.05.070 ↗
42. Improving metal dusting resistance of transition-metals and Ni-Cu alloys10.1002/maco.200503883 ↗