Effect of sodium acetate additive in successive ionic layer adsorption and reaction on the performance of CdS quantum-dot-sensitized solar cells
Source abstract
Abstract
Abstract Sodium acetate (NaAc) is utilized as an additive in cationic precursors of the successive ionic layer adsorption and reaction (SILAR) process to fabricate CdS quantum-dot (QD)-sensitized photoelectrodes. The effects of the NaAc concentration on the deposition rate and distribution of QDs in mesoporous TiO 2 films, as well as on the performance of CdS-sensitized solar cells are studied. The experimental results show that the presence of NaAc can significantly accelerate the deposition of CdS, improve the QD distribution across photoelectrodes, and thereby, increase the performance of solar cells. These results are mainly attributed to the pH-elevation effect of NaAc to the cationic precursors which increases the electrostatic interaction of the TiO 2 film to cadmium ions. The light-to-energy conversion efficiency of the CdS-sensitized solar cell increases with increasing concentration of the NaAc and approaches a maximum value (3.11%) at 0.05 M NaAc. Additionally, an ionic exchange is carried out on the photoelectrode to transform the deposited CdS into CdS 1−x Se x ternary QDs. The light-absorption range of the photoelectrode is extended and an exceptional power conversion efficiency of 4.51% is achieved due to this treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Dye-sensitized solar cells10.1021/cr900356p ↗
3. Porphyrin-sensitized solar cells with cobalt (II/III)–based redox electrolyte exceed 12 percent efficiency10.1126/science.1209688 ↗
4. Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers10.1038/nchem.1861 ↗
5. Quantum size effects in the study of chemical solution deposition mechanisms of semiconductor films10.1021/j100071a026 ↗
6. Making the most of photons10.1038/nnano.2009.253 ↗
7. Multiple exciton collection in a sensitized photovoltaic system10.1126/science.1191462 ↗
8. Detailed balance limit of efficiency of p–n junction solar cells10.1063/1.1736034 ↗
9. Efficient CdS quantum dot sensitized solar cells made using novel Cu2S counter electrode10.1016/j.jpowsour.2013.09.004 ↗
10. High performance CdS quantum-dot-sensitized solar cells with Ti-based ceramic materials as catalysts on the counter electrode10.1016/j.jpowsour.2013.02.092 ↗
11. Ultrafast hole- and electron-transfer dynamics in CdS−dibromofluorescein (DBF) supersensitized quantum dot solar cell materials10.1021/jz402315p ↗
12. Quantum dot sensitized solar cells with improved efficiency prepared using electrophoretic deposition10.1021/nn1018208 ↗
13. Assembly of CdSe onto mesoporous TiO2 films induced by a self-assembled monolayer for quantum dot-sensitized solar cell applications10.1016/j.jpowsour.2010.01.044 ↗
14. Performance enhancement of quantum-dot-sensitized solar cells by potential-induced ionic layer adsorption and reaction10.1021/am5054916 ↗
15. Increased quantum dot loading by pH control reduces interfacial recombination in quantum-dot-sensitized solar cells10.1021/acsnano.5b02853 ↗
16. Design and development of highly efficient PbS quantum dot-sensitized solar cells working in an aqueous polysulfide electrolyte10.1039/c3cc40754c ↗
17. Development of nonstoichiometric CuInS2 as a light-harvesting photoanode and catalytic photocathode in a sensitized solar cell10.1021/am5061992 ↗
18. High-efficiency “green” quantum dot solar cells10.1021/ja504310w ↗
19. Near infrared absorption of CdSexTe1–x alloyed quantum dot sensitized solar cells with more than 6% Efficiency and high stability10.1021/nn400947e ↗
20. Highly efficient quantum-dot-sensitized solar cell based on co-sensitization of CdS/CdSe10.1002/adfm.200800940 ↗
21. CdS and CdSe quantum dot co-sensitized nanocrystalline TiO2 electrode: quantum dot distribution, thickness optimization, and the enhanced photovoltaic performance10.1016/j.jpowsour.2014.09.148 ↗
22. Highly durable and efficient quantum dot-sensitized solar cells based on oligomer gel electrolytes10.1021/am501407m ↗
23. Multifunctional graphene incorporated polyacrylamide conducting gel electrolytes for efficient quasi-solid-state quantum dot-sensitized solar cells10.1016/j.jpowsour.2015.03.060 ↗
24. Quantum dot solar cells: hole transfer as a limiting factor in boosting the photoconversion efficiency10.1021/la500555w ↗
25. An efficient and transparent copper sulfide nanosheet film counter electrode for bifacial quantum dot-sensitized solar cells10.1016/j.jpowsour.2013.10.028 ↗
26. Highly effective nickel sulfide counter electrode catalyst prepared by optimal hydrothermal treatment for quantum dot-sensitized solar cells10.1016/j.jpowsour.2014.11.038 ↗
27. Boosting power conversion efficiencies of quantum-dot-sensitized solar cells beyond 8% by recombination control10.1021/jacs.5b01946 ↗
28. Capping ligand-induced self-assembly for quantum dot sensitized solar cells10.1021/acs.jpclett.5b00001 ↗
29. Chemical bath deposited CdS/CdSe-sensitized porous TiO2 solar cells10.1016/j.jphotochem.2005.12.012 ↗
30. Chemical bath deposition of stoichiometric CdSe quantum dots for efficient quantum-dot-sensitized solar cell application10.1021/jp411221q ↗
31. Efficient CdSe quantum dot-sensitized solar cells prepared by an improved successive ionic layer adsorption and reaction process10.1021/nl902438d ↗
32. Effective bandgap lowering of CdS deposited by successive ionic layer adsorption and reaction10.1021/jp3105453 ↗
33. How does a SILAR CdSe film grow? Tuning the deposition steps to suppress interfacial charge recombination in solar cells10.1021/jz500481v ↗
34. Mn-doped quantum dot sensitized solar cells: a strategy to boost efficiency over 5%10.1021/ja211224s ↗
35. High performance PbS quantum dot sensitized solar cells exceeding 4% efficiency: the role of metal precursors in the electron injection and charge separation10.1039/c3cp51651b ↗
36. Influence of cationic precursors on CdS quantum-dot-sensitized solar cell prepared by successive ionic layer adsorption and reaction10.1021/jp410615b ↗
37. Effect of the nature of cadmium salts on the effectiveness of CdS SILAR deposition and its consequences on the performance of sensitized solar cells10.1021/jp505787z ↗
38. High-performance quantum dot-sensitized solar cells based on sensitization with CuInS2 quantum dots/CdS heterostructure10.1039/C1EE02253A ↗
39. The significance of the difference in the point of zero charge between rutile and anatase10.1016/S0001-8686(02)00080-5 ↗
40. Electrokinetic characteristics of some metal sulfide-water interfaces10.1021/la00043a027 ↗
41. Recombination in quantum dot sensitized solar cells10.1021/ar900134d ↗
42. Modeling high-efficiency quantum dot sensitized solar cells10.1021/nn101534y ↗
43. Electron transport patterns in TiO2 nanocrystalline films of dye-sensitized solar cells10.1021/jp1006457 ↗
44. Arrays of ZnO/ZnxCd1–xSe nanocables: band gap engineering and photovoltaic applications10.1021/nl201934k ↗
45. CdS/CdSe double-sensitized ZnO nanocable arrays synthesized by chemical solution method and their photovoltaic applications10.1021/jp208254z ↗
46. Surface ion transfer growth of ternary CdS1–xSex quantum dots and their electron transport modulation10.1039/c2nr31703f ↗