journal article·2016-09Open access

Computational multiobjective topology optimization of silicon anode structures for lithium-ion batteries

Sarah L. Mitchell, Michael Ortiz

Abstract

This study utilizes computational topology optimization methods for the systematic design of optimal multifunctional silicon anode structures for lithium-ion batteries. In order to develop next generation high performance lithium-ion batteries, key design challenges relating to the silicon anode structure must be addressed, namely the lithiation-induced mechanical degradation and the low intrinsic electrical conductivity of silicon. As such this work considers two design objectives, the first being minimum compliance under design dependent volume expansion, and the second maximum electrical conduction through the structure, both of which are subject to a constraint on material volume. Density-based topology optimization methods are employed in conjunction with regularization techniques, a continuation scheme, and mathematical programming methods. The objectives are first considered individually, during which the influence of the minimum structural feature size and prescribed volume fraction are investigated. The methodology is subsequently extended to a bi-objective formulation to simultaneously address both the structural and conduction design criteria. The weighted sum method is used to derive the Pareto fronts, which demonstrate a clear trade-off between the competing design objectives. A rigid frame structure was found to be an excellent compromise between the structural and conduction design criteria, providing both the required structural rigidity and direct conduction pathways. The developments and results presented in this work provide a foundation for the informed design and development of silicon anode structures for high performance lithium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Nanostructured silicon anodes for lithium ion rechargeable batteries10.1002/smll.200900382 ↗
2. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
3. Colossal reversible volume changes in lithium alloys10.1149/1.1388178 ↗
4. Reaction of Li with alloy thin films studied by in situ AFM10.1149/1.1613668 ↗
5. Aifantis · 2010
6. A review of the electrochemical performance of alloy anodes for lithium-ion batteries10.1016/j.jpowsour.2010.07.020 ↗
7. Anodic materials for rechargeable Li-batteries10.1016/S0378-7753(01)00934-X ↗
8. Improvement of silicon powder negative electrodes by copper electroless deposition for lithium secondary batteries10.1016/j.jpowsour.2004.12.041 ↗
9. Silicon-based materials as high capacity anodes for next generation lithium ion batteries10.1016/j.jpowsour.2014.05.096 ↗
10. Study of silicon/polypyrrole composite as anode materials for li-ion batteries10.1016/j.jpowsour.2005.03.112 ↗
11. Electrochemical characterizations on si and c-coated si particle electrodes for lithium-ion batteries10.1149/1.1954967 ↗
12. Synthesis of copper silicide nanocrystallites embedded in silicon nanowires for enhanced transport properties10.1039/b919281f ↗
13. Increased cycling efficiency and rate capability of copper-coated silicon anodes in lithium-ion batteries10.1016/j.jpowsour.2010.06.043 ↗
14. Small particle size multiphase Li-alloy anodes for lithium-ion batteries10.1016/S0167-2738(96)00389-X ↗
15. Nanocrystals: the strongest size10.1038/35254 ↗
16. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
17. Porous silicon negative electrodes for rechargeable lithium batteries10.1016/j.jpowsour.2004.06.073 ↗
18. Three-dimensional porous silicon particles for use in high-performance lithium secondary batteries10.1002/anie.200804355 ↗
19. High-performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
20. Crystalline-amorphous coreshell silicon nanowires for high capacity and high current battery electrodes10.1021/nl8036323 ↗
21. Silicon nanowires for rechargeable lithium-ion battery anodes
22. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
23. A thin film silicon anode for Li-ion batteries having a very large specific capacity and long cycle life10.1016/j.jpowsour.2004.03.014 ↗
24. Shape evolution of patterned amorphous and polycrystalline silicon microarray thin film electrodes caused by lithium insertion and extraction10.1016/j.jpowsour.2012.04.105 ↗
25. High capacity and long cycle life silicon anode for Li-ion battery10.1016/j.jpowsour.2005.10.081 ↗
26. Multiobjective optimal topology design of structures10.1007/s004660050327 ↗
27. Power generation enhancement of solid oxide fuel cell by cathode–electrolyte interface modification in mesoscale assisted by level set-based optimization calculation10.1016/j.jpowsour.2010.12.024 ↗
28. A 2D model for shape optimization of solid oxide fuel cell cathodes10.1007/s00158-012-0837-x ↗
29. A 3D topology optimization model of the cathode air supply channel in planar solid oxide fuel cell
30. Topology optimization of gas flow channel routes in an automotive fuel cell10.1007/s12239-012-0078-4 ↗
31. Optimal shape design as a material distribution problem10.1007/BF01650949 ↗
32. The COC algorithm, Part II: topological, geometrical and generalized shape optimization10.1016/0045-7825(91)90046-9 ↗
33. An alternative interpolation scheme for minimum compliance topology optimization10.1007/s001580100129 ↗
34. A class of globally convergent optimization methods based on conservative convex separable approximations10.1137/S1052623499362822 ↗
35. Pareto · 1971
36. Optimality and non-scalar-valued performance criteria10.1109/TAC.1963.1105511 ↗
37. Optimality criteria in structural design10.1073/pnas.61.3.794 ↗
38. Optimal fine-scale structures in compliance minimization for a uniaxial load
39. Honeycomb-structured silicon: remarkable morphological changes induced by electrochemical (de)lithiation10.1002/adma.201003665 ↗
40. High energy density all-solid-state batteries: a challenging concept towards 3D integration10.1002/adfm.200701245 ↗
41. Elastic softening of amorphous and crystalline Li-Si phases with increasing Li concentration: a first-principles study10.1016/j.jpowsour.2010.04.044 ↗
42. Optimal conditions for fast charging and long cycling stability of silicon microwire anodes for lithium ion batteries, and comparison with the performance of other Si anode concepts10.3390/en6105145 ↗
43. Failure modes of silicon powder negative electrode in lithium secondary batteries10.1149/1.1792242 ↗
44. Size-dependent fracture of silicon nanoparticles during lithiation10.1021/nn204476h ↗
45. Silicon nanowires coated with copper layer as anode materials for lithium-ion batteries10.1016/j.jpowsour.2010.12.075 ↗
46. Carbon-coated silicon nanowire array films for high-performance lithium-ion battery anodes10.1063/1.3238572 ↗